3/4-inch galvanised flanges: specified input ratios and import-use verification required for export manufacture under FTP notice. Input norms for 3/4' galvanised flanges require Hot/Cold Rolled Steel Sheet/Coil/Strip at 1.776 kg/kg of ungalvanised steel, zinc ingot at 0.04 kg/kg of steel, resistant lacquer at 1.42 kg/kg of product, and gaskets net-to-net with net+2% wastage; applicants must ensure imported goods correspond to inputs used or required in the export product.
Cases where this provision is explicitly mentioned in the judgment/order text; may not be exhaustive. To view the complete list of cases mentioning this section, Click here.
Provisions expressly mentioned in the judgment/order text.
3/4-inch galvanised flanges: specified input ratios and import-use verification required for export manufacture under FTP notice.
Input norms for 3/4" galvanised flanges require Hot/Cold Rolled Steel Sheet/Coil/Strip at 1.776 kg/kg of ungalvanised steel, zinc ingot at 0.04 kg/kg of steel, resistant lacquer at 1.42 kg/kg of product, and gaskets net-to-net with net+2% wastage; applicants must ensure imported goods correspond to inputs used or required in the export product.
Full Summary is available for active users!
Note: It is a system-generated summary and is for quick reference only.
TaxTMI 
of 
Join Channel
TaxTMI 
