TaxTMI 
TaxTMI 
SCOMET Updates 2022 - Amendment in Appendix 3 (SCOMET items) to Schedule- 2 of ITC (HS) Classification of Export and Import Items, 2018.
X X X X Extracts X X X X
X X X X Extracts X X X X
....Regulatory Updates" and Sub-heading "Import, Export and SCOMET policy". 3. In order to provide transition time to industry, this Notification shall come into effect after 30 days of the date of issuance. Effect of this Notification:- Annual SCOMET Update - 2022 has been notified to amend Appendix 3 (SCOMET Items) to Schedule-2 of ITC (HS) Classification of Export and Import Items, 2018. (Santosh Kumar Sarangi) Director General of Foreign Trade Ex-officio Additional Secretary, Government of India E-mail: [email protected] [Issued from F. No. 01/91/171/37/AM10/EC(S)] Note: Principal Notification No. 05 dated 24th April 2017, Notification No. 13 dated 28th June 2017, Notification No. 29 dated 21st September 2017, Notification No. 17 dated 3rd July 2018, Notification No. 04 dated 24th April 2019, Notification No. 10 dated 11th June 2020 and Notification No. 47 dated 20.12.2021 ============= Document 1Annexure to Notification No. 46/2015-20 dated 30.11.2022 (Updated as on 30th November 2022) Appendix 3 [List of SCOMET Items] To Schedule- 2 of ITC (HS) Classification of Export and Import Items, 2018 Note: 1. This is Updated and Revised SCOMET List ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....OMET items are to be physically exported outside the country from SEZ i.e. to another country (Refer Rule 26 of the SEZ Rules, 2006). Entering into an Arrangement or Understanding for Site Visits, On-site Verification and Access to Records Documentation It is mandatory for all companies and their subsidiaries registered in India and all other business entities operating in India and involved in the manufacture, processing and use of Special Chemicals, Organisms, Materials, Equipment and Technologies (SCOMET) listed below to obtain permission of the DGFT before entering into any arrangement or understanding that involves an obligation to facilitate or undertake site visits, on-site verification or access to records/ documentation, by foreign Governments or foreign third parties, either acting directly or through an Indian party or parties. Requests for such permissions shall be considered in the manner in which requests for export/import licence are considered. Provided that where obligations involving site visits, on-site verification or access to records/ documentation by foreign governments or foreign third parties are to be undertaken pursuant to a bilateral agreemen....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ements and Genetically-modified Organisms, related technology and software Category 3 Materials, Materials Processing Equipment and related technologies 3A 3A1 3A2 3A3 3A4 3A5 3B 3C 3D4 Materials Special materials Structural materials Rocket propellants and constituent chemicals High explosives Stealth materials Materials processing and production equipment, related technology and specially designed components and accessories therefor. [Reserved] Chemical and biomaterial manufacturing and handling equipment and related technology and software Category 4 Nuclear-related other equipment and technology, not controlled under Category 0 4A Equipment, assemblies, components including test and production equipment 1 Added vide Notification No. 02/2015-20 dated 24.04.2019 2 Para 1(i) Notification No. 17/2015-20 dated 03.07.2018 3 No change 4 Para 1(ii) Notification No. 17/2015-20 dated 03.07.2018 3 4B 4C Appendix 3 - SCOMET List Equipment, assemblies, components including test and measurement equipment usable in development of nuclear explosive devices Technology Category 5 Aerospace systems, equipment, including production and test equipment, related t....
X X X X Extracts X X X X
X X X X Extracts X X X X
....‘Glossary' in SCOMET list. 2. In some instances chemicals are listed by name and CAS number. The list applies to chemicals of the same structural formula (including hydrates) regardless of name or CAS number. CAS numbers are shown to assist in identifying a particular chemical or mixture, irrespective of nomenclature. CAS numbers cannot be used as unique identifiers because some forms of the listed chemical have different CAS numbers, and mixtures containing a listed chemical may also have different CAS numbers. 3. The object of the controls contained in this Schedule should not be defeated by the export of any non-controlled goods containing one or more controlled components when the controlled component or components are the principal element of the goods and can feasibly be removed or used for other purposes. 4. N.B. In judging whether the controlled component or components are to be considered the principal element, it is necessary to weigh the factors of quantity, value and technological know-how involved and other special circumstances which might establish the controlled component or components as the principal element of the goods being procured. Goods ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....rable aircraft and missile motions or structural loads by autonomously processing outputs from multiple sensors and then providing necessary preventive commands to effect automatic control. "Active pixel" A minimum (single) element of the solid state array which has a photoelectric transfer function when exposed to light (electromagnetic) radiation. "Additives" Substances used in explosive formulations to improve their properties. "Aircraft" A fixed wing, swivel wing, rotary wing (helicopter), tilt rotor or tilt-wing airborne vehicle. "Airship" A power-driven airborne vehicle that is kept buoyant by a body of gas (usually helium, formerly hydrogen) which is lighter than air. "All compensations available" "All compensations available" means after all feasible measures available to the manufacturer to minimise all systematic positioning errors for the particular machine-tool model or measuring errors for the particular coordinate measuring machine are considered. "Allocated by the ITU" The allocation of frequency bands according to the current edition of the ITU Radio Regulations for primary, permitted and secondary services. N.B. Additional and alternative allocat....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ied by the pulse frequency of the laser, in Hertz. "Basic gate propagation delay time" The propagation delay time value corresponding to the basic gate used in a monolithic integrated circuit. For a 'family' of monolithic integrated circuits, this may be specified either as the propagation delay time per typical gate within the given 'family' or as the typical propagation delay time per gate within the given 'family'. Technical Notes 1. Basic gate propagation delay time is not to be confused with the input/output delay time of a complex monolithic integrated circuit. 2. 'Family' consists of all integrated circuits to which all of the following are applied as their manufacturing methodology and specifications except their respective functions: a. The common hardware and software architecture; b. The common design and process technology; and C. The common basic characteristics. "Basic scientific research" Experimental or theoretical work undertaken principally to acquire new knowledge of the fundamental principles of phenomena or observable facts, not primarily directed towards a specific practical aim or objective. "Bias (accelerometer)" The average over a specif....
X X X X Extracts X X X X
X X X X Extracts X X X X
....r Error Probable (CEP) or Circle of Equal Probability" In a circular normal distribution, the radius of the circle containing 50% of the individual measurements being made, or the radius of the circle within which there is a 50% probability of being located. "Circulation-controlled anti-torque or circulation-controlled direction control systems" Control systems using air blown over aerodynamic surfaces to increase or control the forces generated by the surfaces. "Civil aircraft" Those aircraft listed by designation in published airworthiness certification lists by the competent civil aviation authorities to fly commercial civil internal and external routes or for legitimate civil, private or business use. "Comminution" A process to reduce a material to particles by crushing or grinding. "Communications channel controller" The physical interface which controls the flow of synchronous or asynchronous digital information. It is an assembly that can be integrated into computer or telecommunications equipment to provide communications access. "Compensation systems" Consist of the primary scalar sensor, one or more reference sensors (e.g., vector “magnetometers") to....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ation of information using one or more 'secret parameters' (e.g., crypto variables) or associated key management. Notes 1. 2. "Cryptography" does not include 'fixed' data compression or coding techniques. "Cryptography" includes decryption. Technical Notes 1. 2. 'Secret parameter': a constant or key kept from the knowledge of others or shared only within a group. 'Fixed': the coding or compression algorithm cannot accept externally supplied parameters (e.g., cryptographic or key variables) and cannot be modified by the user. 10 10 Appendix 3 - SCOMET List "CTP" It is equivalent to composite theoretical performance. "CW Laser" A laser that produces nominally constant output energy for greater than 0.25 seconds. "Cyber incident response" The process of exchanging necessary information on a cybersecurity incident with individuals or organizations responsible for conducting or coordinating remediation to address the cybersecurity incident. "Data-Based Referenced Navigation (DBRN) Systems" Systems which use various sources of previously measured geo-mapping data integrated to provide accurate navigation information under dynamic conditions. Data sources include....
X X X X Extracts X X X X
X X X X Extracts X X X X
....m isotope is defined as the isotope weight in grams. "Electronically steerable phased array antenna" An antenna which forms a beam by means of phase coupling, (i.e., the beam direction is controlled by the complex excitation coefficients of the radiating elements) and the direction of that beam can be varied (both in transmission and reception) in azimuth or in elevation, or both, by application of an electrical signal. "Electronic assembly" A number of electronic components (i.e., circuit elements, discrete components, integrated circuits, etc.) connected together to perform (a) specific function(s), replaceable as an entity and normally capable of being disassembled. "End-effectors" Grippers, 'active tooling units' and any other tooling that is attached to the baseplate on the end of a robot manipulator arm. Technical Note 'Active tooling units' are devices for applying motive power, process energy or sensing to a workpiece. "Energetic materials" Substances or mixtures that react chemically to release energy required for their intended application. Explosives, pyrotechnics and propellants are subclasses of energetic materials. "Equivalent Density" The mass of an....
X X X X Extracts X X X X
X X X X Extracts X X X X
....inear or two-dimensional planar layer, or combination of planar layers, of individual detector elements, with or without readout electronics, which work in the focal plane. Note This definition does not include a stack of single detector elements or any two, three or four element detectors provided time delay and integration is not performed within the element. "Fractional bandwidth" The instantaneous bandwidth divided by the centre frequency, expressed as a percentage. "Frequency hopping" A form of spread spectrum in which the transmission frequency of a single communication channel is made to change by a random or pseudo-random sequence of discrete steps. "Frequency mask trigger" For signal analysers a mechanism where the trigger function is able to select a frequency range to be triggered on as a subset of the acquisition bandwidth while ignoring other signals that may also be present within the same acquisition bandwidth. A frequency mask trigger may contain more than one independent set of limits. "Frequency switching time" The time (i.e., delay) taken by a signal when switched from an initial specified output frequency, to arrive at or within any of the followi....
X X X X Extracts X X X X
X X X X Extracts X X X X
....connected together to perform (a) specific function(s), and having all of the following characteristics: Containing at least one unencapsulated device; a. b. Connected together using typical IC production methods; C. d. Replaceable as an entity; and Not normally capable of being disassembled. "Image enhancement" The processing of externally derived information-bearing images by algorithms such as time compression, filtering, extraction, selection, correlation, convolution or transformations between domains (e.g., fast Fourier transform or Walsh transform). This does not include algorithms using only linear or rotational transformation of a single image, such as translation, feature extraction, registration or false coloration. "Information security" All the means and functions ensuring the accessibility, confidentiality or integrity of information or communications, excluding the means and functions intended to safeguard against malfunctions. This includes cryptography, cryptographic activation, 'cryptanalysis', protection against compromising emanations and computer security. 14 14 Technical Note Appendix 3 SCOMET List 'Cryptanalysis': the analysis of a cryp....
X X X X Extracts X X X X
X X X X Extracts X X X X
....s or processes running on a device. This includes antivirus (AV) products, end point security products, Personal Security Products (PSP), Intrusion Detection Systems (IDS), Intrusion Prevention Systems (IPS) or firewalls. 2. 'Protective countermeasures': techniques designed to ensure the safe execution of code, such as Data Execution Prevention (DEP), Address Space Layout Randomisation (ASLR) or sandboxing. "Isolated live cultures" Includes live cultures in dormant form and in dried preparations. "Isostatic presses" Equipment capable of pressurising a closed cavity through various media (gas, liquid, solid particles, etc.) to create equal pressure in all directions within the cavity upon a workpiece or material. 15 - Appendix 3 SCOMET List "Laser" An item that produces spatially and temporally coherent light through amplification by stimulated emission of radiation. "Library (parametric technical database)" A collection of technical information, reference to which may enhance the performance of relevant systems, equipment or components. "Lighter-than-air vehicles" Balloons and airships that rely on hot air or on lighter-than-air gases such as helium or hydroge....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... a bath of a molten metal alloy. 16 Appendix 3 - SCOMET List "Melt spinning" A process to solidify rapidly a molten metal stream impinging upon a rotating chilled block, forming a flake, ribbon or rod-like product. "Microcircuit" A device in which a number of passive and/or active elements are considered as indivisibly associated on or within a continuous structure to perform the function of a circuit "Microcomputer microcircuit" A monolithic integrated circuit or multichip integrated circuit containing an arithmetic logic unit (ALU) capable of executing general purpose instructions from an internal storage, on data contained in the internal storage. Technical Note The internal storage may be augmented by an external storage. "Microprocessor microcircuit" A "monolithic integrated circuit†or “multichip integrated circuit" containing an arithmetic logic unit (ALU) capable of executing a series of general purpose instructions from an external storage. Technical Note The microprocessor microcircuit normally does not contain integral user-accessible storage, although storage present on-the-chip may be used in performing its logic function. Note This defi....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ching network. It uses a common medium which operates throughout at the same digital transfer rate using arbitration (e.g., token or carrier sense) for transmission. Independently from any other, it selects data packets or data groups (e.g., IEEE 802) addressed to it. It is an assembly that can be integrated into computer or telecommunications equipment to provide communications access. "Neural computer" A computational device designed or modified to mimic the behaviour of a neuron or a collection of neurons, i.e., a computational device which is distinguished by its hardware capability to modulate the weights and numbers of the interconnections of a multiplicity of computational components based on previous data. "Nuclear reactor" includes the items within or attached directly to the reactor vessel, the equipment which controls the level of power in the core, and the components which normally contain or come into direct contact with or control the primary coolant of the reactor core. "Numerical control" The automatic control of a process performed by a device that makes use of numeric data usually introduced as the operation is in progress. (Ref. ISO 2382 (2015). "O....
X X X X Extracts X X X X
X X X X Extracts X X X X
....f an individual person or device controller (e.g., single room, office or automobile). Technical Notes 2. 1. 'Data device' means equipment capable of transmitting or receiving sequences of digital information. The "local area network" extends beyond the geographical area of the "personal area network". "Plasma atomization" A process to reduce a molten stream or solid metal to droplets of 500 μm diameter or less, using plasma torches in an inert gas environment. "Power management" Changing the transmitted power of the altimeter signal so that received power at the aircraft altitude is always at the minimum necessary to determine the altitude. "Precursors" Speciality chemicals used in the manufacture of explosives. "Pressure transducers" are devices that convert pressure measurements into an electrical signal. "Previously separated" The application of any process intended to increase the concentration of the controlled isotope. "Primary flight control" Aircraft stability or manoeuvering control using force/moment generators, i.e. aerodynamic control surfaces or propulsive thrust vectoring. "Principal element" An element is a principal element when its replace....
X X X X Extracts X X X X
X X X X Extracts X X X X
....t with air. "Quantum cryptography" A family of techniques for the establishment of a shared key for cryptography by measuring the quantum- mechanical properties of a physical system (including those physical properties explicitly governed by quantum optics, quantum field theory, or quantum electrodynamics). "Radar frequency agility" Any technique which changes, in a pseudo-random sequence, the carrier frequency of a pulsed radar transmitter between pulses or between groups of pulses by an amount equal to or larger than the pulse bandwidth. 20 Appendix 3 - SCOMET List "Radar spread spectrum" Any modulation technique for spreading energy originating from a signal with a relatively narrow frequency band, over a much wider band of frequencies, by using random or pseudo-random coding. "Radiant sensitivity" Radiant sensitivity (mA/W) = 0.807 x (wavelength in nm) x Quantum Efficiency (QE). Technical Note QE is usually expressed as a percentage; however, for the purposes of this formula QE is expressed as a decimal number less than one, e.g., 78%is 0.78. "Radiation hardened" means that the component or equipment is designed or rated to withstand radiation levels which me....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ally/tele-operator controllable; 2. Fixed sequence manipulation mechanisms which are automated moving devices, operating according to mechanically fixed programmed motions. The programme is mechanically limited by fixed stops, such as 21 Appendix 3 - SCOMET List pins or cams. The sequence of motions and the selection of paths or angles are not variable or changeable by mechanical, electronic or electrical means; 3. Mechanically controlled variable sequence manipulation mechanisms which are automated moving devices, operating according to mechanically fixed programmed motions. The programme is mechanically limited by fixed, but adjustable stops, such as pins or cams. The sequence of motions and the selection of paths or angles are variable within the fixed programme pattern. Variations or modifications of the programme pattern (e.g., changes of pins or exchanges of cams) in one or more motion axes are accomplished only through mechanical operations; 4. Non-servo-controlled variable sequence manipulation mechanisms which are automated moving devices, operating according to mechanically fixed programmed motions. The programme is variable but the sequence proceeds only ....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... externally derived information-bearing signals by algorithms such as time compression, filtering, extraction, selection, correlation, convolution or transformations between domains (e.g., fast Fourier transform or Walsh transform). "Software" A collection of one or more programs, or micro-programs, fixed in any tangible medium of expression. However, unless otherwise provided for against any item on the SCOMET List, the List does not control software which is either in the public domain or is generally available to the public by being: a. 1. 2. 3. 4. Sold from stock at retail selling points without restriction, by means of: Over-the-counter transactions; Mail order transactions; Electronic transactions; or Telephone call transactions; and b. Designed for installation by the user without further substantial support by the supplier. "Solidify rapidly" A process involving the solidification of molten material at cooling rates exceeding 1000 K/sec. "Source code" A convenient expression of one or more processes which may be turned by a programming system into equipment executable form ("object code" (or object language). "Spacecraft" Active and passive satellit....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... product. "Spread spectrum" The technique whereby energy in a relatively narrow-band communication channel is spread over a much wider energy spectrum. "Spread spectrum radar" see Radar spread spectrum "Stability" Standard deviation (1 sigma) of the variation of a particular parameter from its calibrated value measured under stable temperature conditions. This can be expressed as a functionof time. Statement of Understanding For gyroscopes and accelerometers, "stability" can be estimated by determining the Allan variance noise- analysis value at the integration period (i.e., sample time) consistent with the stated measurement period, which may include extrapolating the Allan variance noise analysis beyond the instability point into the rate/acceleration-random walk or rate/acceleration ramp regions to an integration period consistent with the stated measurement period (Reference: IEEE Std 952-1997 [R2008] or IEEE Std 1293-1998 [R2008]). "Steady State Mode" The term "steady state mode" defines engine operation conditions, where the engine parameters, such as thrust/power, rpm and others, have no appreciable fluctuations, when the ambient air temperature and pressur....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ated with resin. N.B. 'Strand' is a bundle of monofilaments (typically over 200) arranged approximately parallel "Technology means", except as otherwise provided for against any item in the SCOMET List, information (including information embodied in software) other than information in the public domain, that is capable of being used in: a. b. the development, production or use of any goods or software; the development of, or the carrying out of, an industrial or commercial activity or the provision of a service of any kind. Explanation 1: When technology is described wholly or partly by reference to the uses to which it (or the goods to which it relates) may be put, it shall include services which are provided or used, or which are capable of being used, in the development, production or use of such technology or goods. Explanation 2: The information takes the form of 'technical data' or 'technical assistance'. Specified technology is defined in the General Technology Note to the SCOMET Category 8. Specified technology for the Munitions List is defined in 6A022. Technical Notes 1. 2. 'Technical data' may take forms such as blueprints, plans, diagrams, models, for....
X X X X Extracts X X X X
X X X X Extracts X X X X
....avelengths over a range of several "laser" transitions. A line selectable "laser" produces discrete wavelengths within one “laser†transition and is not considered "tunableâ€. "Unidirectional positioning repeatability" The smaller of values R↑ and R↓ (forward and backward), as defined by 3.21 of ISO 230-2:2014 or national equivalents, of an individual machine tool axis as applicable. "Unmanned aerial vehicle (UAV)" Any “aircraft†capable of initiating flight and sustaining controlled flight and navigation without any human presence on board. "Usable in, usable for, usable as or capable of" It qualifies the description of equipment, parts, components, materials, technology or software which are suitable for a particular purpose. There is no requirement that the equipment, parts, components, technology or software should have been configured, modified or specified for that particular purpose. (Contrast with specially designed - see above). 26 - Appendix 3 SCOMET List "Use" Operation, installation (including on-site installation), maintenance (checking), repair, overhaul and refurbishing. "User-accessible programmability" ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....BW ECM ECAD Central Processing Unit Chemical Vapour Deposition Chemical Warfare Continuous Wave Digital-To-Analogue Converter Displayed Average Noise Level Data-Base Referenced Navigation Direct Digital Synthesizer Directed Energy Weapon Systems Dynamic Mechanical Analysis Distance Measuring Equipment Diffused Metal Oxide Semiconductor Field Effect Transistor Directionally Solidified Exploding Bridge Electron Beam Physical Vapour Deposition Exploding Bridge Wire Electro-Chemical Machining Electronic Computer-Aided Design 28 Appendix 3 - SCOMET List EDM EFI EIRP EMC EMCDB EMP ERF ERP ESD ETO ETT FADEC FFT FPGA FPIC FPLA FPO FWHM GAAFET Electrical Discharge Machines Exploding Foil Initiators Effective Isotropic Radiated Power Electromagnetic Compatibility Elastomer Modified Cast Double Based Propellants Electromagnetic Pulse Electrorheological Finishing Effective Radiated Power Electrostatic Discharge Emitter Turn-Off Thyristor Electrical Triggering Thyristor Full Authority Digital Engine Control Fast Fourier Transform Field Programmable Gate Array Field Programmable Interconnect Field Programmable Logic Array Floating Point O....
X X X X Extracts X X X X
X X X X Extracts X X X X
....al Vapour Deposition Quadrature-Amplitude-Modulation Reactive Atom Plasmas Radio Frequency Radio Network Controller Indian Regional Navigation Satellite System 'QZSS' - Quasi Zenith Satellite System Remotely Piloted Air Vehicles Step And Flash Imprint Lithography Synthetic Aperture Radar 30 30 Appendix 3 SCOMET List Sidelooking Airborne Radar Silicon-On-Insulator Superconducting Quantum Interference Device SC SCR SAS Synthetic Aperture Sonar Single Crystal Silicon Controlled Rectifier SFDR Spurious Free Dynamic Range SHPL Super High Powered Laser SLAR SOI SQUID SRA SRAM SSB SSR SSS TE-PVD TIR TVR UTS VJFET VOR WLAN Shop Replaceable Assembly Static Random Access Memory Single Sideband Secondary Surveillance Radar Side Scan Sonar Thermal Evaporation-Physical Vapour Deposition Total Indicated Reading Transmitting Voltage Response Ultimate Tensile Strength Vertical Junction Field Effect Transistor Very High Frequency Omni-Directional Range Wireless Local Area Network 31 Appendix 3 SCOMET List Category 0: Nuclear materials, nuclear-related other materials, equipment and technology Note Export of these items is regulated under the ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....0A305 0A306 Appendix 3 SCOMET List isotope 238 is greater than the ratio of the isotope 235 to the isotope 238 occurring in nature. Note 1. The term “special fissionable material" does not include source material. 2. Any quantity of special fissionable material is prescribed substance. 3. 0A2 does not control - a. Plutonium with an isotopic concentration of plutonium-238 exceeding 80%, and b. Special fissionable material when used in gram quantities or less as a sensing component in instruments. Other Materials 'Other Materials' means non-nuclear materials for reactors, nuclear related dual-use materials indicated below and such materials as determined by the Central Government from time to time. Deuterium and heavy water Deuterium, heavy water (deuterium oxide) and any other deuterium compound, in which the ratio of deuterium to hydrogen atoms exceeds 1:5000, for use in a nuclear reactor in quantities exceeding 5 kilograms of deuterium atoms in one consignment or 25 kilograms of deuterium atoms, for any one recipient country within a period of one calendar year. Nuclear grade graphite Nuclear grade graphite having a purity level better than 5 parts per....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... which the ratio of tritium to hydrogen atoms exceeds 1 part in 1000, except when utilized in such quantities and for such purposes as for organic labelled compounds, Gas Filled Light Sources and as Tritiated Water for radiotracer studies. Hafnium Hafnium metal, alloys containing more than 60% hafnium by weight, hafnium compounds containing more than 60% hafnium by weight, manufactures thereof, and waste or scrap of any of the foregoing. 0A310 0A311 0A312 0A313 Radium-226 Radium-226 (226Ra), radium-226 alloys, radium-226 compounds, mixtures containing radium- 226, manufactures thereof, and products or devices containing any of the foregoing, except medical applicators and a product or device containing less than 0.37 GBq (10mCi) of Ra-226 in any form. Boron Boron enriched in the Boron-10 (10B) isotope to greater than its natural isotopic abundance as follows: Elemental boron, compounds, mixtures containing boron, manufactures thereof, waste or scrap of any of the foregoing. Helium-3 Helium-3 (³He), mixtures containing helium-3, and products or devices containing any of the foregoing. Note A product or device containing less than 1gm of Helium-3 is exclud....
X X X X Extracts X X X X
X X X X Extracts X X X X
....m³/second (120,000 SCFM) while operating at pressures greater than or equal to 1.8 MPa (260 psi) suction and have seals designed for wet H2S service 3. Ammonia-Hydrogen Exchange Towers greater than or equal to 35 m in height with diameters of 1.5 m to 2.5 m capable of operating at pressures greater than 15 MPa especially designed or prepared for heavy water production 4. Tower Internals and Stage Pumps: Tower internals and stage pumps especially designed or prepared for heavy water production. Tower internals include especially designed stage contactors which promote intimate gas/liquid contact. Stage pumps include especially designed submersible pumps for circulation of liquid ammonia within a contacting stage internal to the stage towers. 5. Ammonia Crackers with operating pressures greater than or equal to 3 MPa especially designed or prepared for heavy water production. 6. Infrared Absorption Analyzers capable of ‘on-line' hydrogen/deuterium ratio analysis 7. Catalytic Burners for conversion of enriched deuterium gas into heavy water 8. Complete heavy water upgrade systems or columns therefor 9. Ammonia synthesis converters or synthesis units for heavy....
X X X X Extracts X X X X
X X X X Extracts X X X X
....specially designed or prepared for use in a reprocessing plant as identified above and intended to expose or prepare the irradiated nuclear material in fuel assemblies, bundles or rods for processing. b. Dissolvers: Dissolver vessels or dissolvers employing mechanical devices especially designed or prepared for use in a reprocessing plant as identified above, intended for dissolution of irradiated nuclear fuel and which are capable of withstanding hot, highly corrosive liquid, and which can be remotely loaded, operated, and maintained. C. Solvent extractors and solvent extraction equipment: Especially designed or prepared solvent extractors (such as packed or pulse columns, mixer settlers or centrifugal contactors) for use in a plant for the reprocessing of irradiated fuel. Solvent extractors must be resistant to the corrosive effect of nitric acid. Solvent extractors are normally fabricated to extremely high standards special welding and inspection and quality assurance and quality control techniques) out of low carbon stainless steels, titanium, zirconium, or other high quality materials. d. Chemical holding or storage vessels: Especially designed or prepared holding....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ials' described in the Note-1 in 0B005.a; 4. Rings or bellows: Rings or bellows with wall thickness of 3 mm or less and a diameter of between 75 mm and 650 mm especially designed to give local support to a rotor tube or to join together a number of rotor tubes, made from ‘high strength-to-density ratio materials' described in the Note-1 in 0B005.a. 5. Baffles: Disc-shaped components of between 75 mm and 650 mm diameter especially designed or prepared for mounting inside a rotor tube, in order to isolate the take-off chamber from the main separation chamber and manufactured from ‘high strength-to- density ratio materials' described in the Note-1 in 0B005.a. 6. Top or bottom caps: Especially designed or prepared disc-shaped components of between 75 mm and 400 mm diameter especially designed or prepared to fit the ends of a rotor tube, and so contain the UF6 within the rotor tube, and in some cases to support, retain or contain as an integrated part an element of the upper bearing (top cap) or to carry the rotating elements of the motor and lower bearing (bottom cap), and manufactured from ‘high strength-to- density ratio materials' described in the Not....
X X X X Extracts X X X X
X X X X Extracts X X X X
....r less. 12. Scoops consisting of tubes for the extraction of UF6 gas from within the rotor tube by a Pitot tube action and capable of being fixed to the central gas extraction system. Note 1The high strength-to-density ratio materials used for centrifuge rotating components include the following: (a) (b) (c) Maraging steel capable of an ultimate tensile strength of 1.95 GPa or more; Aluminium alloys capable of an ultimate tensile strength of 0.46 GPa or more; Filamentary materials suitable for use in composite structures and having a specific modulus of 3.18 X 10° m or greater and a specific ultimate tensile strength of 7.62 X 10 m or greater. 37 Appendix 3 - SCOMET List Note 2 'Specific Modulus' is the Young's Modulus in N/m² divided by the specific weight in N/m³; 'Specific Ultimate Tensile Strength' is the ultimate tensile strength in N/m² divided by the specific weight in N/m³. b. Especially designed or prepared auxiliary systems, equipment and components for gas centrifuge enrichment plants 1. Machine header piping systems for handling UF within the centrifuge cascades; 2. Frequency changers (converters or inverters) especially designed or p....
X X X X Extracts X X X X
X X X X Extracts X X X X
....described in the Note-3 in 0B005, for containing vortex tubes or separation nozzles; 5. Especially designed or prepared header-piping systems, made of or protected by materials resistant to corrosion by UF6 described in the Note-3 in 0B005, for handling UF6 within the aerodynamic cascades; 6. UF6/carrier gas separation systems for separating UF6 from carrier gas (hydrogen or helium). f. Especially designed or prepared systems, equipment and components for use in chemical exchange or ion exchange enrichment plants. 1. Countercurrent Liquid-liquid exchange columns (Chemical exchange), having mechanical power input, especially designed or prepared for uranium enrichment using the chemical exchange process. For corrosion resistance to concentrated hydrochloric acid solutions, these columns and their internals are normally made of or protected by materials resistant to corrosion by concentrated hydrochloric acid solutions. The stage residence time of the columns is normally designed to be 30 seconds or less. 38 Appendix 3 SCOMET List 2. Liquid-liquid centrifugal contactors (Chemical exchange), especially designed or prepared for uranium enrichment using the chemical e....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... nozzles (molecular based methods) UF6/carrier gas compressors (molecular based methods) 6. 'Product' or 'tails' collectors (molecular based methods) 7. 8. Rotary shaft seals (molecular based methods) 9. Fluorination systems (molecular based methods) 10. UF6/carrier gas separation systems (molecular based methods) 11. 'Lasers' or 'laser systems or components' for the separation of uranium isotopes. h. Especially designed or prepared systems, equipment and components for use in plasma separation enrichment plants 1. Microwave power sources and antennae: Especially designed or prepared microwave power sources and antennae for producing or accelerating ions and having the following characteristics: greater than 30 GHz frequency and greater than 50 kW mean power output for ion production. 2. 3. Radio frequency ion excitation coils for frequencies of more than 100 kHz Uranium plasma generation systems 4. Uranium metal ‘product' and 'tails' collector assemblies made of or protected by materials resistant to the heat and corrosion of uranium metal vapour. 5. Separator module housings (cylindrical vessels) for containing the uranium plasma source, radio-freque....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... include copper, copper alloys, stainless steel, aluminium, aluminium oxide, aluminium alloys, nickel or alloys containing 60% or more nickel and fluorinated hydrocarbon polymers. Plants for the fabrication of nuclear reactor fuel elements, and equipment especially designed or prepared therefor including but not limited to: a. fully automatic pellet inspection stations especially designed or prepared for checking final dimensions and surface defects of the fuel pellets; b. automatic welding machines especially designed or prepared for welding end caps onto the fuel pins (or rods); C. 0B007 OB008 automatic test and inspection stations especially designed or prepared for checking the integrity of completed fuel pins (or rods); d. systems especially designed or prepared to manufacture nuclear fuel cladding. Item 'c' typically includes equipment for: 1) x-ray examination of pin (or rod) end cap welds, 2) helium leak detection from pressurized pins (or rods), and 3) gamma-ray scanning of the pins (or rods) to check for correct loading of the fuel pellets inside. Plants or systems for production, handling, storage and transportation of Radioisotopes in quantities exc....
X X X X Extracts X X X X
X X X X Extracts X X X X
....sed frequency range exceeding 37 GHz but not exceeding 75 GHz, or f. Less than 100 μs for any frequency change exceeding 5.0 GHz within the synthesised frequency range exceeding 75 GHz but not exceeding 90 GHz; or g. Less than 1 ms within the synthesised frequency range exceeding 90 GHz; A 'frequency synthesiser' is any kind of frequency source, regardless of the actual technique used, providing a multiplicity of simultaneous or alternative output frequencies, from one or more outputs, controlled by, derived from or disciplined by a lesser number of standard (or master) frequencies. For general purpose "signal analysers", signal generators, network analysers and microwave test receivers, see 8A302.c, 8A302.d, 8A302.e and 8A302.f respectively. b. 12. 'Transmit/receive modules', 'transmit/receive MMICS', 'transmit modules', and 'transmit MMICS', rated for operation at frequencies above 2.7 GHz and having all of the following: A peak saturated power output (in watts), Psat, greater than 505.62 divided by the maximum operating frequency (in GHz) squared [Psat>505.62 W*GHz²/f2] for any channel; a. b. C. A "fractional bandwidth" of 5% or greater for any channel; G....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... and bandwidth in MHz) of more than 100; A dispersive delay of more than 10 μs; or 3. A 'frequency side-lobe rejection' exceeding 65 dB and a bandwidth greater than 100 MHz; Technical Note 'Frequency side-lobe rejection' is the maximum rejection value specified in data sheet. Bulk (volume) acoustic wave devices which permit the direct processing of signals at frequencies exceeding 6 GHz; 3. Acoustic-optic "signal processing" devices employing interaction between acoustic waves (bulk wave or surface wave) and light waves which permit the direct processing of signals or images, including spectral analysis, correlation or convolution; Note 8A301.c does not apply to acoustic wave devices that are limited to a single band pass, low pass, high pass or notch filtering, or resonating function. d. Electronic devices and circuits containing components, manufactured from "superconductive" materials, specially designed for operation at temperatures below the "critical temperature" of at least one of the "superconductive" constituents and having any of the following: 1. 2. Current switching for digital circuits using "superconductive" gates with a product of delay time p....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... 2. An energy density equal to or more than 50 J/kg; 3. A total energy equal to or more than 100 J; and 4. A charge/discharge cycle life equal to or more than 10,000; See also 6A012 "Superconductive" electromagnets and solenoids, specially designed to be fully charged or discharged in less than one second and having all of the following: 8A301 e. 3. Note 8A301 e. 4. 8A301 f. a. b. C. 8A301.e.3 does not apply to "superconductive" electromagnets or solenoids specially designed for Magnetic Resonance Imaging (MRI) medical equipment. Energy delivered during the discharge exceeding 10 kJ in the first second; Inner diameter of the current carrying windings of more than 250 mm; and Rated for a magnetic induction of more than 8 T or "overall current density" in the winding of more than 300 A/mm²; Solar cells, cell-interconnect-coverglass (CIC) assemblies, solar panels, and solar arrays, which are "space-qualified", having a minimum average efficiency exceeding 20% at an operating temperature of 301 K (28°C) under simulated 'AM0' illumination with an irradiance of 1,367 Watts per square meter (W/m²); Technical Note 'AMO', or 'Air Mass Zero', refers to t....
X X X X Extracts X X X X
X X X X Extracts X X X X
....istors (BJTs) - Thyristors and Silicon Controlled Rectifiers (SCRs) - Gate Turn-Off Thyristors (GTO) - Emitter Turn-Off Thyristors (ETOS) PiN Diodes Schottky Diodes Note 3 8A301.h does not apply to switches, diodes, or 'modules', incorporated into equipment designed for civil automobile, civil railway, or "civil aircraft" applications. Technical Note For the purposes of 8A301.h, 'modules' contain one or more solid-state power semiconductor switches or diodes. Intensity, amplitude, or phase electro-optic modulators, designed for analogue signals and having any of the following: Note: 1. A maximum operating frequency of more than 10 GHz but less than 20 GHz, an optical insertion loss equal to or less than 3 dB and having any of the following: 2. a. A half-wave voltage' ('Vл') less than 2.7 V when measured at a frequency of 1 GHz or below; or b. A 'Vл' of less than 4 V when measured at a frequency of more than 1 GHz; or A maximum operating frequency equal to or greater than 20 GHz, an optical insertion loss equal to or less than 3 dB and having any of the following: a. A 'Vл' less than 3.3 V when measured at a frequency of 1 GHz or below; or b. A 'V....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... than a 3 dB reduction from full amplitude due to gaps or windowing effects, of signals having a duration of 15 μs or less; or A 'frequency mask trigger' function with 100% probability of trigger (capture) for signals having a duration of 15 μs or less; Technical Notes 'Real-time bandwidth' is the widest frequency range for which the analyser can continuously transform time-domain data entirely into frequency-domain results, using a Fourier or other discrete time transform that processes every incoming time point, without a reduction of measured amplitude of more than 3 dB below the actual signal amplitude caused by gaps or windowing effects, while outputting or displaying the transformed data. 2. Probability of discovery in 84302.c.4.b.1 is also referred to as probability of intercept or probability of capture. 3. For the purposes of 8A302.c.4.b.1, the duration for 100% probability of discovery is equivalent to the minimum signal duration necessary for the specified level measurement uncertainty. 167 4. Appendix 3 - SCOMET List A 'frequency mask trigger' is a mechanism where the trigger function is able to select a frequency range to be triggered on as a su....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ompressed pulse width of greater than 30 ns; Single and rotating mechanically scanned antenna; Peak output power not exceeding 250 W; and Not capable of "frequency hopping". C. d. e. Having data processing sub-systems and having any of the following: Note: 'Automatic target tracking' providing, at any antenna rotation, the predicted target position beyond the time of the next antenna beam passage; or 8A608.1.1 does not apply to conflict alert capability in ATC systems, or 'marine radar' Technical Note Automatic target tracking' is a processing technique that automatically determines and provides as output an extrapolated value of the most probable position of the target in real time. 8A608 1. 1. Note: 8B6 8B601 2. (Reserved); 3. (Reserved); 4. Configured to provide superposition and correlation, or fusion, of target data within six seconds from two or more 'geographically dispersed' radar sensors to improve the aggregate performance beyond that of any single sensor specified by 84608.f or 84608.i. Technical Note other more Sensors are considered 'geographically dispersed' when each location is distant from any than 1,500 m in any direction. Mobile s....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... Potassium titanyl arsenate (KTA) (CAS 59400-80-5); 2. Silver gallium selenide (AgGaSe2, also known as AGSE) (CAS 12002-67-4); 3. Thallium arsenic selenide (T13AsSe3, also known as TAS) (CAS 16142-89-5); 4. Zinc germanium phosphide (ZnGeP2, also known as ZGP, 5. zinc germanium biphosphide or zinc germanium diphosphide); or Gallium selenide (GaSe) (CAS 12024-11-2); 8C604 C. 1. Non-linear optical materials, other than those specified by 8C604.b, having any of the following: Having all of the following: a. Dynamic (also known as non-stationary) third order non-linear susceptibility (x(³), chi 3) of 106m²/V2 or more; and b. Response time of less than 1 ms; or 2. Second order non-linear susceptibility (x(²), chi 2) of 3.3×10¹¹ m/V or more; 8C604 d. "Substrate blanks" of silicon carbide or beryllium beryllium (Be/Be) deposited materials, exceeding 300 mm in diameter or major axis length; 8C604 e. Glass, including fused silica, phosphate glass, fluorophosphate glass, zirconium fluoride (ZrF4) (CAS 216 8C604 f. Appendix 3 - SCOMET List 7783-64-4) and hafnium fluoride (HfF4) (CAS 13709-52-9) and having all of the following: A hydroxyl ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ly designed for all of the following: a. "Real-time processing" of acoustic data from sonar systems specified by 8A601.a.1.e; and b. Automatically detecting, classifying and determining the location of divers or 217 8D603 CAMERAS 8D603 8D603 Appendix 3 - SCOMET List swimmers; N.B. For diver detection "software" or "source code", specially designed or modified for military use, see Category 6. b. OPTICAL SENSORS - (Reserved) c. "Software" designed or modified for cameras incorporating "focal plane arrays" specified by 8A602.a.3.f and designed or modified to remove a frame rate restriction and allow the camera to exceed the frame rate specified in 8A603.b.4 Note 3.a. OPTICS d. "Software" specially designed to maintain the alignment and phasing of segmented mirror systems consisting of mirror segments having a diameter or major axis length equal to or larger than 1 m; 8D603 e. LASERS (Reserved) MAGNETIC AND ELECTRIC FIELD SENSORS "Software" as follows: 8D603 f. 1. 2. 8D603 g. 8D603 h. 8E6 8E601 8E602 "Software" specially designed for magnetic and electric field "compensation systems" for magnetic sensors designed to operate on mobile platforms; ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....5 m2; LASERS "Technology" "required" for the "development", "production" or "use" of specially designed diagnostic instruments or targets in test facilities for "SHPL" testing or testing or evaluation of materials irradiated by "SHPL" beams; 8E603 e. 8E603 f. MAGNETIC AND ELECTRIC FIELD SENSORS - (Reserved) 8E603 g. GRAVIMETERS - (Reserved) 8E603 h. RADAR (Reserved). 8A7 8A701 8A701 8A702 Navigation and Avionics (SYSTEMS, EQUIPMENT AND COMPONENTS) For automatic pilots for underwater vehicles, see 848,8B8,8C8, 8D8,8E. For radar, see 8A6, 8B, 8C6, 8D6,8E6. N.B. Accelerometers as follows and specially designed components therefor: N.B. For angular or rotational accelerometers, see 8A701.b. Linear accelerometers having any of the following: a. 1. b. 2. Specified to function at linear acceleration levels less than or equal to 15 g and having any of the following: a. A "bias" "stability" of less (better) than 130 micro g with respect to a fixed calibration value over a period of one year; or b. A "scale factor" "stability" of less (better) than 130 ppm with respect to a fixed calibration value over a period of one year; Specified to function at line....
X X X X Extracts X X X X
X X X X Extracts X X X X
....erence Systems (AHRSs); Gyrocompasses; Inertial Measurement Units (IMUs); Inertial Navigation Systems (INSs); 8A703 8A703 a. Inertial Reference Systems (IRSs); Inertial Reference Units (IRUS). Note 2 84703 does not apply to 'inertial measurement equipment or systems' which are certified for use on "civil aircraft" by civil aviation authorities of one or more Wassenaar Arrangement Participating States. Technical Note 'Positional aiding references' independently provide position, and include: a. b. "Satellite navigation system"; "Data-Based Referenced Navigation" ("DBRN"). Designed for "aircraft", land vehicles or vessels, providing position without the use of 'positional aiding references', and having any of the following "accuracies" subsequent to normal alignment: 0.8 nautical miles per hour (nm/hr) "Circular Error Probable" ("CEP") rate or less (better); 0.5% distanced travelled "CEP" or less (better); or 1. 2. 3. Total drift of 1 nautical mile "CEP" or less (better) in a 24 hr period; Technical Note The performance parameters in 8A703.a.1, 8A703.a.2 and 8A703.a.3 typically apply to 'inertial measurement equipment or systems' designed for "aircraft", ve....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... the equipment; Components specially designed for equipment specified in 8A704.a as follows: 1. Optical heads or baffles; 2. Data processing units. Technical Note 'Star trackers' are also referred to as stellar attitude sensors or gyro-astro compasses. Global Navigation Satellite Systems (GNSS) receiving equipment having any of the following and specially designed components therefor: N.B. a. b. For equipment specially designed for military use, see 64011. Employing a decryption algorithm specially designed or modified for government use to access the ranging code for position and time; or Employing 'adaptive antenna systems'. Note 8A705.b does not apply to GNSS receiving equipment that only uses components designed to filter, switch, or combine signals from multiple omni-directional antennae that do not implement adaptive antenna techniques. Technical Note For the purposes of 8A705.b 'adaptive antenna systems' dynamically generate one or more spatial nulls in an antenna array pattern by signal processing in the time domain or frequency domain. Airborne altimeters operating at frequencies other than 4.2 to 4.4 GHz inclusive and having any of the following: a....
X X X X Extracts X X X X
X X X X Extracts X X X X
....er" gyros, as follows: a. Scatterometers having a measurement "accuracy" of 10 ppm or less (better); b. Profilometers having a measurement "accuracy" of 0.5 nm (5 angstrom) or less (better). Equipment specially designed for the "production" of equipment specified by 8A7. Note 8B703 includes: Gyro tuning test stations; Gyro dynamic balance stations; Gyro run-in/motor test stations; Gyro evacuation and fill stations; Centrifuge fixtures for gyro bearings; Accelerometer axis align stations; Fibre optic gyro coil winding machines. 8C7 NAVIGATION AND AVIONICS (MATERIALS) - (Reserved) 8D7 8D701 8D702 NAVIGATION AND AVIONICS (SOFTWARE) "Software" specially designed or modified for the "development" or "production" of equipment specified by 8A7 or 8B7. "Source code" for the operation or maintenance of any inertial navigation equipment, including inertial equipment not specified by 8A703 or 8A704, or Attitude and Heading Reference Systems ('AHRS'). Note 8D702 does not apply to "source code" for the operation or maintenance of gimballed 'AHRS'. Technical Note 'AHRS' generally differ from Inertial Navigation Systems (INS) in that an 'AHRS' provides attitude and headin....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ied by 8A7, 8B7, 8D701, 8D702, 8D703 or 8D705. Note 8E701 includes key management "technology" exclusively for equipment specified in 84705.a. "Technology" according to the General Technology Note for the "production" of equipment specified by 8A7 or 8B7. "Technology" according to the General Technology Note for the repair, refurbishing or overhaul of equipment specified by 8A701 to 8A704. Note 8E703 does not apply to "technology" for maintenance, directly associated with calibration, removal or replacement of damaged or unserviceable LRUS and SRAs of a "civil aircraft" as described in 'Maintenance Level I' or 'Maintenance Level II'. N.B. See Technical Notes to 8B701. Other "technology" as follows: 8E704 a. "Technology" for the "development" or "production" of any of the following: 1. (Reserved); 223 8E704 a. 2. 3. 4. 5. Appendix 3 - SCOMET List Air data systems based on surface static data only, i.e, which dispense with conventional air data probes; Three dimensional displays for "aircraft"; (Reserved) Electric actuators (i.e., electromechanical, electrohydrostatic and integrated actuator package) specially designed for 'primary flight control'; 8E704 ....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... tasks. (Reserved) "Technology" "required" for deriving the functional requirements for "fly-by-wire systems" having all of the following: 'Inner-loop' airframe stability controls requiring loop closure rates of 40 Hz or greater; and a. Technical Note 'Inner-loop' refers to functions of "active flight control systems" that automate airframe stability controls. 8E704 b. 6. 8E704 b. 7. 224 8E704 b. 7. b. 8E704 b. 8. Appendix 3 - SCOMET List Having any of the following: 1. Corrects an aerodynamically unstable airframe, measured at any point in the design flight envelope, that would lose recoverable control if not corrected within 0.5 seconds; 2. Couples controls in two or more axes while compensating for 'abnormal changes in aircraft state'; 3. Technical Note 'Abnormal changes in aircraft state' include in-flight structural damage, loss of engine thrust, disabled control surface, or destabilizing shifts in cargo load. Performs the functions specified in 8E704.b.5; or Note 8E704 .b.7.b.3 does not apply to autopilots. 4. Enables "aircraft" to have stable controlled flight, other than during take-off or landing, at greater than 18 degrees angle of attac....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... 8A801.b, 'operate autonomously' means fully submerged, without snorkel, all systems working and cruising at minimum speed at which the submersible can safely control its depth dynamically by using its depth planes only, with no need for a support vessel or support base on the surface, sea-bed or shore, and containing a propulsion system for submerged or surface use. For the purposes of 8A801.b, 'range' means half the maximum distance a submersible vehicle can 'operate autonomously'. c. Unmanned submersible vehicles, as follows: Unmanned submersible vehicles having any of the following: 1. a. 2. b. C. Designed for deciding a course relative to any geographical reference without real time human assistance; Acoustic data or command link; or Optical data or command link exceeding 1,000 m; Unmanned submersible vehicles, not specified in 8A801c.1., having all of the following: Designed to operate with a tether; a. b. Designed to operate at depths exceeding 1,000 m; : and Having any of the following: Designed for self-propelled manoeuvre using propulsion motors or thrusters specified by 8A802.a.2.; or C. 1. 2. Fibre optic data link; 8A801 d. (Reserved) 8A....
X X X X Extracts X X X X
X X X X Extracts X X X X
....underwater use incorporating "focal plane arrays" specified by 84602.a.3.g, see 84603.b.4.c. Light systems specially designed or modified for underwater use, as follows: Stroboscopic light systems capable of a light output energy of more than 300 J per flash and a flash rate of more than 5 flashes per second; Argon arc light systems specially designed for use below 1,000 m; "Robots" specially designed for underwater use, controlled by using a dedicated computer and having any of the following: 1. 2. Systems that control the "robot" using information from sensors which measure force or torque applied to an external object, distance to an external object, or tactile sense between the "robot" and an external object; or The ability to exert a force of 250 N or more or a torque of 250 Nm or more and using titanium based alloys or "composite" "fibrous or filamentary materials" in their structural members; Remotely controlled articulated manipulators specially designed or modified for use with submersible vehicles and having any of the following: 2. Systems which control the manipulator using information from sensors which measure any of the following: a. b. Torque o....
X X X X Extracts X X X X
X X X X Extracts X X X X
....eaction against a pressure of 100 kPa or more; Stirling cycle engine air independent power systems having all of the following: a. Devices or enclosures, specially designed for underwater noise reduction in frequencies below 10 kHz, or special mounting devices for shock mitigation; and b. Specially designed exhaust systems which discharge the products of combustion against a pressure of 100 kPa or more; 8A802 k. (Reserved) 8A802 1. (Reserved) 8A802 m. (Reserved) 8A802 n. (Reserved) 8A802 0. 8A802 0. Propellers, power transmission systems, power generation systems and noise reduction systems, as follows: 1. 2. (Reserved); Water-screw propeller, power generation systems or transmission systems, designed for use on vessels, as follows: a. b. 2.5 MW; C. Controllable-pitch propellers and hub assemblies, rated at more than 30 MW; Internally liquid-cooled electric propulsion engines with a power output exceeding "Superconductive" propulsion engines or permanent magnet electric propulsion engines, with a power output exceeding 0.1 MW; d. Power transmission shaft systems incorporating "composite" material components and capable of transmitting more tha....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ls. 8C8MARINE (MATERIALS) 'Syntactic foam' designed for underwater use and having all of the following: Designed for marine depths exceeding 1,000 m; and 8C801 a. b. A density less than 561 kg/m³. Technical Note 'Syntactic foam' consists of hollow spheres of plastic or glass embedded in a resin "matrix". N.B. See also 8A802.a.4. 8D8 MARINE (SOFTWARE) 8D801 8D802 "Software" specially designed or modified for the "development", "production" or "use" of equipment or materials, specified by 8A8, 8B8 or 8C8. Specific "software" specially designed or modified for the "development", "production", repair, overhaul or refurbishing (re-machining) of propellers specially designed for underwater noise reduction. 8E8MARINE (TECHNOLOGY) 8E801 8E802 8E802 "Technology" according to the General Technology Note for the "development" or "production" of equipment or materials, specified by 8A8, 8B8 or 8C8. Other "technology" as follows: a. "Technology" for the "development", "production", repair, overhaul or refurbishing (re-machining) of propellers specially designed for underwater noise reduction; b. "Technology" for the overhaul or refurbishing of equipment specified ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ved by the civil aviation authority of India. Designed to power an "aircraft" designed to cruise at Mach 1 or higher, for more than 30 minutes. 'Marine gas turbine engines' designed to use liquid fuel and having all of the following, and specially designed assemblies and components therefor: Note: a. Maximum continuous power when operating in "steady state mode" at standard reference conditions specified by ISO 3977-2:1997 (or national equivalent) of 24,245 kW or more; and b. 'Corrected specific fuel consumption' not exceeding 0.219 kg/kWh at 35% of the maximum continuous power when using liquid fuel. The term 'marine gas turbine engines' includes those industrial, or aero-derivative, gas turbine engines adapted for a ship's electric power generation or propulsion. Technical Note For the purposes of 84902, 'corrected specific fuel consumption' is the specific fuel consumption of the engine corrected to a marine distillate liquid fuel having a net specific energy (i.e., net heating value) of 42MJ/kg (ISO 3977-2:1997). 8A903 Specially designed assemblies or components, incorporating any of the "technologies" specified by 8E903.a, 8E903.h. or 8E903.i, for any of the....
X X X X Extracts X X X X
X X X X Extracts X X X X
....y data processing of frame synchronisation and error corrections, for monitoring of operational status (also known as health and safe status) of the "spacecraft bus"; or b. Command data processing for formatting command data being sent to the "spacecraft" to control the "spacecraft bus"; Simulators specially designed for 'verification of operational procedures" of "spacecraft". Technical Note For the purposes of 8A904.f.2., 'verification of operational procedures' is any of the following: 1. Command sequence confirmation; 2. Operational training; 3. Operational rehearsals; or 4. Operational analysis g. "Aircraft" specially designed or modified to be air-launch platforms for space launch vehicles or "sub- orbital craft"; 8A904 8A905 8A906 h. "Sub-orbital craft". Liquid rocket propulsion systems containing any of the systems or components, specified by 8A906. Systems and components, specially designed for liquid rocket propulsion systems, as follows: a. Cryogenic refrigerators, flightweight dewars, cryogenic heat pipes or cryogenic systems, specially designed for use in space vehicles and capable of restricting cryogenic fluid losses to less than 30% per year; ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....zle throat erosion rates of less than 0.075 mm/s; Movable nozzle or secondary fluid injection thrust vector control systems, capable of any of the following: 1. Omni-axial movement exceeding ± 5°; 2. Angular vector rotations of 20°/s or more; or 3. Angular vector accelerations of 40°/s² or more. 8A909 8A910 Hybrid rocket propulsion systems having any of the following: a. Total impulse capacity exceeding 1.1 MNs; or b. Thrust levels exceeding 220 kN in vacuum exit conditions. Specially designed components, systems and structures, for launch vehicles, launch vehicle propulsion systems or "spacecraft", as follows: a. Components and structures, each exceeding 10 kg and specially designed for launch vehicles manufactured using any of the following: "Composite" materials consisting of "fibrous or filamentary materials" specified by 8C110.e and resins specified by 8C008 or 8C008b; 1. 2. a. Metal "matrix" "composites" reinforced by any of the following: Materials specified by 8C107; b. "Fibrous or filamentary materials" specified by 8C110; or C. Aluminides specified by 8C102.a; or 232 8A910 b. Appendix 3 - SCOMET List 3. Ceramic "matrix" "com....
X X X X Extracts X X X X
X X X X Extracts X X X X
....sight, with or without corrective lenses. Related equipment and components, as follows: 1. (Reserved); 2. (Reserved); 3. Equipment or components, specially designed to convert a manned "aircraft" or a manned "airship" to a "UAV" or unmanned "airship", specified by 8A912.a; 4. Air breathing reciprocating or rotary internal combustion type engines, specially designed or modified to propel "UAVs" or unmanned "airships", at altitudes above 15,240 meters (50,000 feet). 8B9 AEROSPACE AND PROPULSION (TEST, INSPECTION AND PRODUCTION EQUIPMENT) 8B901 Manufacturing equipment, tooling or fixtures, as follows: a. Directional solidification or single crystal casting equipment designed for "superalloys"; 233 b. Appendix 3 - SCOMET List Casting tooling, specially designed for manufacturing gas turbine engine blades, vanes or "tip shrouds", manufactured from refractory metals or ceramics, as follows: 1. Cores; 2. Shells (moulds); 8B902 8B903 8B904 8B905 C. 3. Combined core and shell (mould) units; Directional-solidification or single-crystal additive-manufacturing equipment designed for "superalloys". On-line (real time) control systems, instrumentation (including....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... at stress levels of 60% of Ultimate Tensile Strength (UTS) or more measured at a temperature of 873 K (600°C); and Designed to operate at 873 K (600°C) or more. 8B909 does not specify tooling for the production of powder. Equipment specially designed for the production of items specified by 8A912. b. Note 8B910 8C9 AEROSPACE AND PROPULSION (MATERIALS) - (Reserved) 8D9 AEROSPACE AND PROPULSION (SOFTWARE) 8D901 "Software", not specified in 8D903 or 8D904, specially designed or modified for the "development" of equipment or "technology", specified by 8A9, 8B9 or 8E903. 8D902 "Software", not specified in 8D903 or 8D904, specially designed or modified for the "production" of equipment specified by 8A9 or 8B9. 234 8D903 8D904 Appendix 3 - SCOMET List "Software" incorporating "technology" specified by 8E903.h and used in "FADEC Systems" for systems specified by 8A901 to 8A912 or equipment specified by 8B901 to 8B910. Other "software" as follows: b. a. 2D or 3D viscous "software", validated with wind tunnel or flight test data required for detailed engine flow modelling; C. "Software" for testing aero gas turbine engines, assemblies or components, having....
X X X X Extracts X X X X
X X X X Extracts X X X X
....es or engine modules. N.B. 8E903 "Technology" according to the General Technology Note for the "development" of equipment or "software", specified by 8A901b, 8A904 to 8A912, 8B901 to 8B910 or 8D901 to 8D905. "Technology" according to the General Technology Note for the "production" of equipment specified by 8A901.b, 8A904 to 8A911 or 8B901 to 8B910. For "technology" for the repair of specified structures, laminates or materials, see 8E902.f. Other "technology" as follows: 235 a. 8E903 a. Appendix 3 - SCOMET List "Technology" "required" for the "development" or "production" of any of the following gas turbine engine components or systems: 1. Gas turbine blades, vanes or "tip shrouds", made from directionally solidified (DS) or single crystal (SC) alloys and having (in the 001 Miller Index Direction) a stress-rupture life exceeding 400 hours at 1,273 K (1,000°C) at a stress of 200 MPa, based on the average property values; 2. Technical Note For the purposes of 8E903.a.1., stress-rupture life testing is typically conducted on a test specimen. Combustors having any of the following: a. 'Thermally decoupled liners' designed to operate at 'combustor exit temp....
X X X X Extracts X X X X
X X X X Extracts X X X X
....t' performs the initial separation of the air-mass flow between the bypass and 236 8E903 a. 4. 8E903 a. 5. Appendix 3 - SCOMET List core sections of the engine. Uncooled turbine blades, vanes or "tip shrouds", designed to operate at a 'gas path temperature' of 1,373 K (1,100°C) or more; Cooled turbine blades, vanes, "tip shrouds" other than those described in 8E903.a.1, designed to operate at a 'gas path temperature' of 1,693 K (1,420°C) or more; 8E903 a. 6. 7. 8. 9. Technical Note 1. 'Gas path temperature' is the bulk average gas path total (stagnation) temperature at the leading edge plane of the turbine component when the engine is running in a 'steady state mode' of operation at the certificated or specified maximum continuous operating temperature. Aerofoil-to-disk blade combinations using solid state joining; (Reserved) 'Damage tolerant' gas turbine engine rotor components using powder metallurgy materials specified by 8C102.b; or Technical Note 'Damage tolerant' components are designed using methodology and substantiation to predict and limit crack growth. (Reserved) N.B. For "FADEC systems", see 8E903.h. (Reserved) 10. N.B. For adj....
X X X X Extracts X X X X
X X X X Extracts X X X X
....for the "development" or "production" of helicopter power transfer systems or tilt rotor or tilt wing "aircraft" power transfer systems; "Technology" for the "development" or "production" of reciprocating diesel engine ground vehicle propulsion systems having all of the following: 1. 2. 3. 'Box volume' of 1.2 m³ or less; An overall power output of more than 750 kW based on 80/1269/EEC, ISO 2534; and Power density of more than 700 kW/m³ of 'box volume'; Technical Note 'Box volume' is the product of three perpendicular dimensions measured in the following way: Length: The length of the crankshaft from front flange to flywheel face; The widest of any of the following: Width: a. The outside dimension from valve cover to valve cover; b. The dimensions of the outside edges of the cylinder heads; or 8E903 f. Height: C. The diameter of the flywheel housing; The largest of any of the following: a. The dimension of the crankshaft centre-line to the top plane of the valve cover (or cylinder head) plus twice the stroke; or b. The diameter of the flywheel housing. "Technology" "required" for the "production" of specially designed components for high output dies....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... shaft power; "Development" "technology" for the control law algorithms, including "source code", unique to the "FADEC system" and used to regulate engine thrust or shaft power; Note 8E903.h does not apply to technical data related to engine-"aircraft" integration required by civil aviation authorities of India to be published for general airline use (e.g, installation manuals, operating instructions, instructions for continued airworthiness) or interface functions (e.g, input/output processing, airframe thrust or shaft power demand). "Technology" for adjustable flow path systems designed to maintain engine stability for gas generator turbines, fan or power turbines, or propelling nozzles, as follows: "Development" "technology" for deriving the functional requirements for the components that maintain engine stability; "Development" or "production" "technology" for components unique to the adjustable flow path system and that maintain engine stability; "Development" "technology" for the control law algorithms, including "source code", unique to the adjustable flow path system and that maintain engine stability. Note 8E903.i. does not apply to "technology" for any of ....