TaxTMI 
TaxTMI 
Amendments in the ITC (HS) Classifications of Export and Import Items, 2004-09
X X X X Extracts X X X X
X X X X Extracts X X X X
....ial Chemicals, Organisms, Materials, Equipment and Technologies (SCOMET) export of which is regulated Export of Special Chemicals, Organisms, Materials, Equipment and Technologies (SCOMET) listed below shall be permitted only against an export licence issued in this behalf unless export is prohibited or is permitted without licence subject to fulfillment of conditions, if any, as indicated under/against any specific category or item. Exporters are advised to refer to the relevant guidelines relating to the export of SCOMET items in the Handbook of Procedures (Vol.I), as issued from time to time. Glossary: Expressions used in the SCOMET List have the following meanings: "Accuracy" usually measured in terms of inaccuracy, means the maximum deviation, positive or negative, of an indicated value from an accepted standard or true value. "Active flight control systems" are systems that function to prevent undesirable "aircraft" and missile motions or structural loads by autonomously processing outputs from multiple sensors and then providing necessary preventive commands to effect automatic control. "Aircraft": A fixed wing, swivel wing, rotary wing (helicopter), tilt r....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... "rovings"; c. "Tapes", fabrics, random mats and braids; d. Chopped fibres, staple fibres and coherent fibre blankets; e. Whiskers, either monocrystalline or polycrystalline, of any length; f. Aromatic polyamide pulp. "Hybrid computer" means equipment which can perform all of the following: a. Accept data; b. Process data, in both analogue and digital representations; and c. Provide output of data. "Image enhancement" means the processing of externally derived information-bearing images by algorithms such as time compression, filtering, extraction, selection, correlation, convolution or transformations between domains (e.g., fast Fourier transform or Walsh transform). This does not include algorithms using only linear or rotational transformation of a single image, such as translation, feature extraction, registration or false coloration. "Information security" is all the means and functions ensuring the accessibility, confidentiality or integrity of information or communications, excluding the means and functions intended to safeguard against malfunctions. This includes cryptography, 'cryptanalysis', protection against compromising emanations and com....
X X X X Extracts X X X X
X X X X Extracts X X X X
....erial vehicle systems. "Modified" in the context of "software" describes "software" which has been intentionally changed such that it has properties that make it fit for specified purposes or applications. Its properties may also make it suitable for purposes or applications other than those for which it was "modified." "Monofilament" or filament is the smallest increment of fibre, usually several micrometres in diameter. "Monolithic integrated circuit" means a combination of passive or active 'circuit elements' or both which: a. Are formed by means of diffusion processes, implantation processes or deposition processes in or on a single semiconducting piece of material, a so-called 'chip'; b. Can be considered as indivisibly associated; and c. Perform the function(s) of a circuit. N.B.: 'Circuit element' is a single active or passive functional part of an electronic circuit, such as one diode, one transistor, one resistor, one capacitor, etc. "Neural computer" means a computational device designed or modified to mimic the behaviour of a neuron or a collection of neurons, i.e., a computational device which is distinguished by its hardware capability to modula....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ice; or on digital instruments, the least significant bit. "Roving" is a bundle (typically 12-120) of approximately parallel 'strands'. N.B.: 'Strand' is a bundle of "monofilaments" (typically over 200) arranged approximately parallel. "Settling time" means the time required for the output to come within one-half bit of the final value when switching between any two levels of the converter. "Signal processing" means the processing of externally derived information-bearing signals by algorithms such as time compression, filtering, extraction, selection, correlation, convolution or transformations between domains (e.g., fast Fourier transform or Walsh transform). "Software": A collection of one or more "programmes", or "micro-programmes", fixed in any tangible medium of expression. However, unless otherwise provided for against any item on the SCOMET List, the List does not control "software" which is either in the public domain or is generally available to the public by being : a. Sold from stock at retail selling points without restriction, by means of: 1. Over-the-counter transactions; 2. Mail order transactions; or 3. Telephone call transactions; and ....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... foodstuffs or seed stocks of "microorganisms". "Unmanned Aerial Vehicle" ("UAV") means any aircraft capable of initiating flight and sustaining controlled flight and navigation without any human presence on board. "Usable in," "usable for," "usable as" or "capable of" qualifies the description of equipment, parts, components, materials, technology or "software" which are suitable for a particular purpose. There is no requirement that the equipment, parts, components, technology or "software" should have been configured, modified or specified for that particular purpose. (Contrast with "specially designed" - see above). "Use" includes operation; installation (including on site installation); maintenance; repair; overhaul; refurbishing. "Vaccine" is a medicinal product in a pharmaceutical formulation licensed by, or having marketing or clinical trial authorisation from, the regulatory authorities of either the country of manufacture or of use, which is intended to stimulate a protective immunological response in humans or animals in order to prevent disease in those to whom or to which it is administered. "Yarn" is a bundle of twisted 'strands'. N.B.: 'Strand' is a....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... 7C Computers 7D Information technology including information security 7E [Reserved] Category 0 Nuclear materials, nuclear-related other materials, equipment and technology Note: Export of these items is regulated under the Atomic Energy Act, 1962 and rules framed, and notifications/orders issued thereunder from time-to-time by the Department of Atomic Energy. The licensing authority for items in this category is the Department of Atomic Energy. An application for licences to export prescribed equipment or/an prescribed substances shall be made in writing to the Joint Secretary, Department of Atomic Energy, Anushakti Bhavan, CSM Marg, Mumbai 400 001. 0A Prescribed Substances Note: Any radioactive material in Category 0A shall additionally attract the provisions of Radiation Protection Rules, 2004 made under the Atomic Energy Act, 1962 and the provisions of Section-16 of the Atomic Energy Act, 1962. 0A1 Source Material 0A101 Uranium containing the mixture of isotopes occurring in nature. 0A102 Uranium depleted in the isotope 235. 0A103 Thorium. 0A104 Any of the foregoing in the form of metal, alloy, chemical compound, o....
X X X X Extracts X X X X
X X X X Extracts X X X X
....f, waste or scrap of any of the foregoing. 0A306 Niobium and Tantalum, their metals, alloys and minerals including columbite and tantalite. 0A307 Titanium alloys having both of the following characteristics: a. 'Capable of' an ultimate tensile strength of 900 MPa or more at 293 K (20 degrees C); and b. In the form of tubes or cylindrical solid forms (including forgings) with an outside diameter of more than 75 mm. Technical note: The phrase 'capable of' encompasses titanium alloys before or after heat treatment. 0A308 Tritium, tritium compounds or mixtures containing tritium in which the ratio of tritium to hydrogen atoms exceeds 1 part in 1000, except when utilized in such quantities and for such purposes as for organic labelled compounds, Gas Filled Light Sources and as Tritiated Water for radiotracer studies. 0A309 Hafnium: (CAS 7440-58-6) Hafnium metal, alloys containing more than 60% hafnium by weight, hafnium compounds containing more than 60% hafnium by weight, manufactures thereof, and waste or scrap of any of the foregoing. 0A310 Radium-226: Radium-226 (226Ra), radium-226 alloys, radium-226 compounds, mixtures containing radium-....
X X X X Extracts X X X X
X X X X Extracts X X X X
....he core of a nuclear reactor. 0B002 Plants for processing, production, concentration, conversion or recovery of Prescribed Substances (such as uranium, plutonium, thorium, deuterium, heavy water, tritium, lithium); associated equipment, components and systems specially designed, prepared or adapted or used or intended to be used in such plants including but not limited to: a. Plants for production or concentration of deuterium, heavy water- 1. Water - Hydrogen Sulphide Exchange Towers 2. Blowers and Compressors for hydrogen-sulphide gas circulation 3. Ammonia-Hydrogen Exchange Towers greater than or equal to 35 m in height with diameters of 1.5 m to 2.5 m 4. Tower Internals and Stage Pumps 5. Ammonia Crackers with operating pressures greater than or equal to 3 MPa 6. Infrared Absorption Analyzers capable of 'on-line' hydrogen/ deuterium ratio analysis 7. Catalytic Burners for conversion of enriched deuterium gas into heavy water 8. Complete heavy water upgrade systems or columns there for b. Plants for the conversion of uranium c. Plants for the conversion of plutonium d. Tritium facilities or plants, and equipment therefor e. Lithium isotope separation facil....
X X X X Extracts X X X X
X X X X Extracts X X X X
....e or ion exchange enrichment plants. g. Specially designed or prepared systems, equipment and components for use in laser-based enrichment plants. h. Specially designed or prepared systems, equipment and components for use in plasma separation enrichment plants. i. Specially designed or prepared systems, equipment and components for use in electromagnetic enrichment plants. 0B006 Plants for the fabrication of nuclear reactor fuel elements, and equipment specially designed or prepared therefor including but not limited to: a. fully automatic pellet inspection stations specially designed or prepared for checking final dimensions and surface defects of the fuel pellets; b. automatic welding machines specially designed or prepared for welding end caps onto the fuel pins (or rods); c. automatic test and inspection stations specially designed or prepared for checking the integrity of completed fuel pins (or rods). Item 'c' typically includes equipment for: 1) x-ray examination of pin (or rod) end cap welds, 2) helium leak detection from pressurized pins (or rods), and 3) gamma-ray scanning of the pins (or rods) to check for correct loading of the fuel pellets inside. ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....methyl phosphonite (11).Chlorosarin: O-Isopropyl methylphosphonochloridate (12).Chlorosoman: O-Pinacolyl methylphosphonochloridate 1B Export of chemicals listed in 1B below is permitted only to States party to the Chemical Weapons Convention (This corresponds to Schedule 2 to the Chemicals Weapons Convention) Note to exporter: (a) A list of States Parties can be obtained from the Disarmament & International Security Affairs Division of the Ministry of External Affairs (Room No. 40G, South Block, New Delhi) or at the official website of the Organization for the Prohibition of Chemical Weapons at www.opcw.org. (b) A general permission valid for a period of two years may be applied for export of chemicals in this category. This permission shall be subject to the condition that for each export consignment, exporters shall, within 30 days of exports, notify the details to the National Authority, Chemical Weapons Convention, Cabinet Secretariat ; Ministry of External Affairs (D&ISA); Department of Chemicals and Petrochemicals and the Directorate General of Foreign Trade and submit to DGFT, a copy of Bill of Entry into the destination State Party within 30 days of ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....5 9. Di-Methyl Amino ethanethiol Hydrochloride 2B12 13242-44-9 29221116 10. Phosphorothioic acid, S [2-(diethylamino) ethyl] O, O - diethyl ester 2A01 78-53-5 29201910 11. 1-Propene, 1,1, 3, 3, 3, - Pentafluoro - 2- (trifluoromethyl) (PFIB) 2A02 382-21-8 29033911 12. Benzeneacetic acid, alphahydroxy - alpha-phenyl, 1 - azabicyclo [2.2.2.] oct-3-yl ester 2A03 6581-06-2 29392050 13. Phosphonic Acid, Methyl-compound with (aminoimino methyl) urea (1: 1) 2B04 84402-58-4 29209047 14. 1-Propanaminium N, N, N-trimethyl - 3- [1-oxo-9 octadecenyl) amino]-. (Z)- methyl methylphosphonate 2B04 70055-71-9 29209048 15. Phosphonic acid, [methyl bis (5-ethyl-2-methyl-2-oxido-1, 3, 2- dioxaphosphorinan-5-yl) methyl] ester 2B04 42595-45-9 29209051 16. Phosphonic acid, [methyl-(5-ethyl-2-methyl 2-oxido-1,3,2-dioxaphosphorinan-5-yl) methyl] ester 2B04 41203-81-0 29209052 17. Phosphonic acid, propyl-dimethyl ester 2B04 18755-43-6 29209053 18. Phosphonous acid, methyl-diethyl ester 2B04 15715-41-0 29209054 19. Phosphonic acid, ethyl- 2B04 6779-0....
X X X X Extracts X X X X
X X X X Extracts X X X X
....506-77-4 28530091 3. Hydrocyanic acid 3A03 74-90-8 28111910 4. Chloropicrin: Trichloronitro-Methane 3A04 76-06-2 29049080 5. Phosphorus Oxychloride 3B05 10025-87-3 28121030 6. Phosphorus trichloride 3B06 7719-12-2 28121021 7. Phosphorous Pentachloride 3B07 10026-13-8 28121022 8. Trimethyl Phosphite 3B08 121-45-9 29209041 9. Triethyl Phosphite 3B09 122-52-1 29209042 10. Dimethyl Phosphite 3B10 868-85-9 29209043 11. Diethyl Phosphite 3B11 762-04-9 29209044 12. Sulphur monochloride 3B12 10025-67-9 28121042 13. Sulphur dichloride 3B13 10545-99-0 28121043 14. Thionyl Chloride 3B14 7719-09-7 28121047 15. Ethyldiethanolamine 3B15 139-87-7 29221211 16. Methyldiethanolamine 3B16 105-59-9 29221212 17. Triethanolamine 3B17 102-71-6 29221300 Category 2 Micro-organisms, toxins 2A Bacteria, whether natural, enhanced or modified, either in the form of isolated live cultures or as material including living material which has been deliberately inoculated or conta....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ontaminated with such cultures for the following: 2D001 African Horse Sickness virus 2D002 African Swine Fever virus 2D003 Avian influenza virus 2D004 Blue tongue virus 2D005 Camel pox virus 2D006 Chikungunya virus 2D007 Crimean-Congo hemorrhagic fever virus 2D008 Dengue virus 2D009 Eastern equine encephalitis virus 2D010 Ebola fever virus 2D011 Encephalomyocarditis virus (EMC) 2D012 Foot and Mouth Disease virus (all serotypes and subtypes) 2D013 Guanirito virus 2D014 Goatpox virus 2D015 Hantaan virus 2D016 Herpes virus simiae (monkey B virus) 2D017 Herpes ateles, Herpes saimiri 2D018 HIV- 1 & HIV-2 and other strains of SIV 2D019 Hog cholera virus 2D020 Human T-cell Leukemia virus 2D021 Junin virus 2D022 Japanese encephalitis virus 2D023 Kyasanur Forest Disease virus and Central European encephalitis viruses. 2D024 Korean hemorrhagic fever virus 2D025 Lymphocytic choriomeningitis virus (LCM) 2D026 Lassa virus 2D027 Marburg virus 2D028 Murrey valley encephalitis virus 2D029 Marchupo virus 2D030 Mason-pfize....
X X X X Extracts X X X X
X X X X Extracts X X X X
....miis (Puccinia glumarum) 2G013 Pyricularia oryzae 2G014 Pseudomonas solanacearum 2G015 Peronospora hyscyami de Bary 2G016 Ralstonia solanacearum 2G017 Sugar cane Fiji disease virus 2G018 Sclerotinia sclerotiorum 2G019 Tilletia indica 2G020 Thrips palmi 2G021 Ustilago Maydis 2G022 Xanthomonas albilineans 2G023 Xanthomonas campestris pv citri 2G024 Xanthomonas campestris pv oryzae 2H Genetically Modified Organisms 2H001 Genetically-modified micro-organisms or genetic elements that contain nucleic acid sequences associated with pathogenicity and are derived from organisms specified above in 2A, 2B, 2C, 2D, 2E and 2H. Genetically-modified micro-organisms or genetic elements that contain nucleic acid sequences coding for any of the toxins specified above in 2F. Category 3 Materials, Materials Processing Equipment and related technologies 3A Materials 3A1 Special Materials 3A101 Zirconium, beryllium, magnesium, and alloys of these in particle size less than 60 µm 3A102 Maraging steel in any form in which any linear dimension exceeds 75 mm, or in the form of sheet, plate o....
X X X X Extracts X X X X
X X X X Extracts X X X X
....rials 3A201 Structural materials such as: a. Composite structures, laminates, resin impregnated fibre prepregs and metal coated fibre preforms made either with an organic matrix or metal matrix utilizing fibrous or filamentary reinforcements, and manufactures thereof, specially designed for use in rocket systems (including ballistic missile systems, space launch vehicles and sounding rockets), unmanned aerial vehicles and cruise missiles and subsystems thereof; b. Resaturated pyrolized (i.e. Carbon-Carbon) materials specially designed for rocket systems (including ballistic missile systems, space launch vehicles and sounding rockets), unmanned aerial vehicles and cruise missiles; c. Fine grain re-crystalised bulk graphites and pyrolytic or fibrous reinforced graphites usable for rocket nozzles and re-entry vehicles nose tips; d. Ceramic composite materials (dielectric constant less than 6 at any frequency from 100 MHz to 100 GHz) for use in missile radomes; e. Materials and coatings for reduced radar reflectivity; f. Bulk machinable silicon-carbide reinforced unfired ceramic usable in re-entry vehicles nose tips. 3A3 Rocket propellants and constituent ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....-6); 6. Dicyclopentyl ferrocene(CAS 20773-28-8); 7. Dicyclohexyl ferrocene; 8. Diethyl ferrocene; 9. Dipropyl ferrocene; 10. Dibutyl ferrocene(CAS 1274-08-4); 11. Dihexyl ferrocene (CAS 93894-59-8); 12. Acetyl ferrocenes; 13. Ferrocene Carboxylic acids; 14. Butacene; c. Other ferrocene derivatives usable as rocket propellant burning rate modifiers. 3A310 Nitrate esters and nitrated plasticisers as follows: a. Triethylene glycol dinitrate (TEGDN); b. Trimethylolethane trinitrate (TMETN)(CAS 3032-55-1) ; c. 1,2,4-butanetriol trinitrate (BTTN)(CAS 6659-60-5) ; d. Diethylene glycol dinitrate (DEGDN). 3A311 Stabilisers as follows: a. 2-Nitrodiphenylamine (CAS 119-75-5); b. N-methyl-p-nitroaniline (CAS 100-15-2). 3A4 High explosives 3A401 High explosives, and propellants or mixtures containing any of the following; a. Cycloteramethylenetetranitramine (HMX); b. Cyclotrimethylenetrinitramine (RDX); c. Triaminotrinitrobenzene (TATB); d. Hexanitrostilbene (HNS). License applications for the export of items at 3A401a and 3A401b will normally be denied. 3A5 Stealth materials 3A501 a. Materials for reduced observables such as radar ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ing or acceptance testing of the solid or liquid rocket propellants or rocket propellant constituents and related technology. 3B008 Refrigeration units and equipment capable of cooling hydrogen or helium to -250 degrees Celsius (23K) or lower. 3B009 Continuous nitrators. 3B010 Dehydration presses. 3B011 Screw extruders usable for or specially designed or modified for high explosive extrusion. 3B012 Cutting machines for the sizing of extruded propellant. 3B013 Sweetie barrels (tumblers) 1.85 m or more in diameter and having over 227 kg product capacity; 3B014 Continuous mixers or batch mixers with provision for mixing under vacuum. 3B015 Fluid energy mills usable for grinding or milling any of the items in 3A3. 3B016 Equipment to achieve both sphericity and uniform particle size in metal powders. a. Metal powder production equipment usable for production, in a controlled environment, of spherical or atomized materials including: b. Plasma generators (high frequency arc-jets) usable for obtaining sputtered or spherical metallic powders with organisation of the process in an argon-water environment c. Electroburst equipmen....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ree Centigrade), and in which any surfaces that come into direct contact with material coming into the containing chamber are made from, or lined with, any of the following materials: a. Alloys with more than 25% nickel and 25% chromium by weight; (e.g., 'Hatelloy', 'Illium', 'Inconel', 'Incoloy') b. Nickel, or alloys with more than 40% nickel by weight; or c. Titanium; d. Ceramics. 3D004 Equipment related to P3, P4 facilities such as protective suits and class III safety cabinets. No licenses shall be granted for complete containment facilities at P3, P4, containment level as specified in the World Health Organization (WHO) bio-safety manual. 3D005 Technology related to the development, production or use of items in 3D Category 4 Nuclear-related other equipment, assemblies and components; test and production equipment; and related technology not controlled under Category 0 4A Equipment, assemblies, components including test and production equipment 4A001 Flow-forming machines, spin-forming machines capable of flow-forming functions, and mandrels, as follows: a. For flow forming machines refer to 5A205. b. Spin forming machines havin....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... control; and d. No contouring c-axis; 2. Jig grinders with axes limited to x, y, c, and a, where c-axis is used to maintain the grinding wheel normal to the work surface, and the a-axis is configured to grind barrel cams; 3. Tool or cutter grinding machines with software specially designed for the manufacturing of tools or cutters; 4. Crankshaft or camshaft grinding machines. d. Non-wire type Electrical Discharge Machines (EDM) that have two or more contouring rotary axes and that can be coordinated simultaneously for contouring control. Note: Stated positioning accuracy levels derived under the following procedures from measurements made according to ISO 230/2 (1988) or national equivalents may be used for each machine tool model if provided to, and accepted by, national authorities instead of individual machine tests. Stated positioning accuracy are to be derived as follows: 1. Select five machines of a model to be evaluated; 2. Measure the linear axis accuracies according to ISO 230/2 (1988); 3. Determine the accuracy values (A) for each axis of each machine. The method of calculating the accuracy value is described in the ISO 230/2 (1988) standard....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... 2. With a measurement uncertainty equal to or better (less) than (0.2 + L/2000) µm (L is the measured length in millimetres); Note: Item 4A003b3 does not control measuring interferometer systems, without closed or open loop feedback, containing a laser to measure slide movement errors of machine tools, dimensional inspection machines, or similar equipment. Technical Note: In Item 4A003b 'linear displacement' means the change of distance between the measuring probe and the measured object. c. Angular displacement measuring instruments having an angular position deviation equal to or better (less) than 0.00025°; Note: Item 4A003c does not control optical instruments, such as autocollimators, using collimated light to detect angular displacement of a mirror. d. Systems for simultaneous linear-angular inspection of hemi-shells, having both of the following characteristics: 1. Measurement uncertainty along any linear axis equal to or better (less) than 3.5 µm per 5 mm; and 2. Angular position deviation equal to or less than 0.02°. Notes: 1. Item 4A003 includes machine tools that can be used as measuring machines if they meet or exceed the criteria specified....
X X X X Extracts X X X X
X X X X Extracts X X X X
....h or without associated amplifiers, capable of imparting a force of 50 kN or greater measured 'bare table', which are usable for the systems specified in Item 4A006a; d. Test piece support structures and electronic units designed to combine multiple shaker units into a complete shaker system capable of providing an effective combined force of 50 kN or greater, measured 'bare table,' which are usable for the systems specified in Item 4A006a. Technical Note: In Item 4A006 'bare table' means a flat table, or surface, with no fixtures or fittings. 4A007 Vacuum or other controlled atmosphere metallurgical melting and casting furnaces and related equipment, as follows: a. Arc re-melt and casting furnaces having both of the following characteristics: 1. Consumable electrode capacities between 1000 and 20000 cm3; and 2. Capable of operating with melting temperatures above 1973 K (1700 °C); b. Electron beam melting furnaces and plasma atomisation and melting furnaces, having both of the following characteristics: 1. A power of 50 kW or greater; and 2. Capable of operating with melting temperatures above 1473 K (1200 °C); c. Computer control and monitoring ....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... oscillators as follows: a. Copper vapour lasers having both of the following characteristics: 1. Operating at wavelengths between 500 and 600 nm; and 2. An average output power equal to or greater than 40 W; b. Argon ion lasers having both of the following characteristics: 1. Operating at wavelengths between 400 and 515 nm; and 2. An average output power greater than 40 W; c. Neodymium-doped (other than glass) lasers with an output wavelength between 1000 and 1100 nm having either of the following: 1. Pulse-excited and Q-switched with a pulse duration equal to or greater than 1 ns, and having either of the following: a. A single-transverse mode output with an average output power greater than 40 W; or b. A multiple-transverse mode output with an average output power greater than 50 W; or 2. Incorporating frequency doubling to give an output wavelength between 500 and 550 nm with an average output power of greater than 40 W; d. Tuneable pulsed single-mode dye laser oscillators having all of the following characteristics: 1. Operating at wavelengths between 300 and 800 nm; 2. An average output power greater than 1 W; 3. A repetition ra....
X X X X Extracts X X X X
X X X X Extracts X X X X
....lly designed for and exported as part of medical nuclear magnetic resonance (NMR) imaging systems. ('As part of' does not necessarily mean physical part in the same shipment. Separate shipments from different sources are allowed, provided the related export documents clearly specify the 'as part of" relationship.) 4A015 High-power direct current power supplies having both of the following characteristics: a. Capable of continuously producing, over a time period of 8 hours, 100 V or greater with current output of 500 A or greater; and b. Current or voltage stability better than 0.1% over a time period of 8 hours. 4A016 High-voltage direct current power supplies having both of the following characteristics: a. Capable of continuously producing, over a time period of 8 hours, 20 kV or greater with current output of 1 A or greater; and b. Current or voltage stability better than 0.1% over a time period of 8 hours. 4A017 Pressure transducers capable of measuring absolute pressures at any point in the range 0 to 13 kPa and having both of the following characteristics: a. Pressure sensing elements made of or protected by aluminium, aluminium alloy, nickel,....
X X X X Extracts X X X X
X X X X Extracts X X X X
....rs having a length of 600 mm or more and having all of the following characteristics: 1. Swing or journal diameter greater than 75 mm; 2. Mass capability of from 0.9 to 23 kg; and 3. Capable of balancing speed of revolution greater than 5000 rpm; b. Centrifugal balancing machines designed for balancing hollow cylindrical rotor components and having all of the following characteristics: 1. Journal diameter greater than 75 mm; 2. Mass capability of from 0.9 to 23 kg; 3. Capable of balancing to a residual imbalance equal to or less than 0.010 kg x mm/kg per plane; and 4. Belt drive type. 4A022 Filament winding machines and related equipment, as follows: a. Filament winding machines as specified in 5A206. b. Coordinating and programming controls for the filament winding machines specified in Item 4A022a; c. Precision mandrels for the filament winding machines specified in Item 4A022a. 4A023 Electromagnetic isotope separators designed for, or equipped with, single or multiple ion sources capable of providing a total ion beam current of 50 mA or greater. Notes: 1. Item 4A023 includes separators capable of enriching stable isotopes as wel....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ssium amide solutions (less than 1%), an operating pressure of 20 to 60 MPa. 4A027 Turbo-expanders or turbo-expander-compressor sets having both of the following characteristics: a. Designed for operation with an outlet temperature of 35 K (- 238 ºC) or less; and b. Designed for a throughput of hydrogen gas of 1000 kg/h or greater. 4A028 Water-hydrogen sulphide exchange tray columns and internal contactors, as follows: a. Water-hydrogen sulphide exchange tray columns, having all of the following characteristics: 1. Can operate at pressures of 2 MPa or greater; 2. Constructed of carbon steel having an austenitic ASTM (or equivalent standard) grain size number of 5 or greater; and 3. With a diameter of 1.8 m or greater; b. Internal contactors for the water-hydrogen sulphide exchange tray columns specified in Item 4A028a. Note: For columns which are especially designed or prepared for the production of heavy water, see Prescribed Equipment (0B002). Technical Note: Internal contactors of the columns are segmented trays which have an effective assembled diameter of 1.8 m or greater; are designed to facilitate counter current contacting and are con....
X X X X Extracts X X X X
X X X X Extracts X X X X
....where i is beam current in amperes and t is the time in seconds. 2. Peak power = (peak potential in volts) x (peak beam current in amperes). 3. In machines based on microwave accelerating cavities, the time duration of the beam pulse is the lesser of 1 µs or the duration of the bunched beam packet resulting from one microwave modulator pulse. 4. In machines based on microwave accelerating cavities, the peak beam current is the average current in the time duration of a bunched beam packet. 4B003 Multistage light gas guns or other high-velocity gun systems (coil, electromagnetic, and electrothermal types, and other advanced systems) capable of accelerating projectiles to 2 km/s or greater. 4B004 Mechanical rotating mirror cameras, as follows, and specially designed components therefor: a. Framing cameras with recording rates greater than 225000 frames per second; b. Streak cameras with writing speeds greater than 0.5 mm/µs. Note: In Item 4B004 components of such cameras include their synchronizing electronics units and rotor assemblies consisting of turbines, mirrors, and bearings. 4B005 Electronic streak cameras, electronic framing cameras, tube....
X X X X Extracts X X X X
X X X X Extracts X X X X
....8 the detonators of concern all utilize a small electrical conductor (bridge, bridge wire, or foil) that explosively vaporizes when a fast, high-current electrical pulse is passed through it. In nonslapper types, the exploding conductor starts a chemical detonation in a contacting high-explosive material such as PETN (pentaerythritoltetranitrate). In slapper detonators, the explosive vaporization of the electrical conductor drives a flyer or slapper across a gap, and the impact of the slapper on an explosive starts a chemical detonation. The slapper in some designs is driven by magnetic force. The term exploding foil detonator may refer to either an EB or a slapper-type detonator. Also, the word initiator is sometimes used in place of the word detonator. 4B009 Firing sets and equivalent high-current pulse generators, as follows: a. Explosive detonator firing sets designed to drive multiple controlled detonators specified by Item 4B008 above; b. Modular electrical pulse generators (pulsers) having all of the following characteristics: 1. Designed for portable, mobile, or ruggedized-use; 2. Enclosed in a dust-tight enclosure; 3. Capable of delivering their energy....
X X X X Extracts X X X X
X X X X Extracts X X X X
...., space launch vehicles and sounding rockets) 5A1 Systems 5A101 Systems for missiles and rockets, including: a. complete rocket systems (including ballistic missile systems, space launch vehicles and sounding rockets) b. complete rocket stages with engines c. solid or liquid fuel rocket engines and their control systems including liquid propellant apogee engines designed or modified for satellites Note: 5A101 does not control JATO units, propulsion units for flares, ejection seats, emergency escape equipment and rockets for display fireworks. 5A102 Subsystems and components usable in missiles and rockets including: a. rocket motor cases, interior lining, insulation and nozzles; b. rocket staging mechanisms, separation mechanisms and inter-stages; c. liquid and slurry propellant (including oxidizers), control systems, and components thereof, specially designed or modified for resistance to vibration; d. re-entry vehicles and equipment including 1. Heat-shields and components thereof, fabricated of ceramic or ablative materials; 2. Heat sinks and components thereof, fabricated of light weight, high heat capacity materials; 3. Electro....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... 5A208 Isostatic presses having all of the characteristics of maximum working pressure equal to or greater than 69 MPa or greater; designed to achieve and maintain a controlled thermal environment of 600oC or greater; and possessing a chamber cavity with an inside diameter of 152 mm or greater. 5A209 Environmental chambers simulating vibration environments, with altitudes equal to or greater than 15 km, or temperature ranging between minus 50 and plus 125 degrees centigrade. 5A210 Environmental chambers simulating acoustic pressure level of 140 dB or greater or rated acoustic power output of 4 KW or greater, with altitudes equal to or greater than 15 km, or temperature ranging between minus 50 and plus 125 degrees centigrade. 5A211 Accelerators delivering electro-magnetic radiation produced by Bremsstrahlung from accelerated electrons. 5A212 Pulsed electron accelerators 5A213 Radial ball bearings having all tolerances specified in accordance with ISO 492 Tolerance Class 2 or better and having all the following characteristics: a. An inner ring bore diameter between 12 and 50 mm; b. An outer ring outside diameter between 25 and 100 mm; and ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ent, production, testing and use of items in 5A1 and 5A2. 5A302 Software for the development, production, and testing and use of items in 5A1 and 5A2. 5A303 Software which coordinates the function of more than one subsystem, specially designed or modified for use in the systems specified in 5A1 and 5A2. 5B Unmanned aerial vehicles including cruise missiles, target drones and reconnaissance drones and related equipment, and specially designed components therefor: a. Unmanned aerial vehicles including Remotely Piloted air Vehicles (RPVs) and autonomous programmable vehicles; b. Associated launchers and ground support equipment; c. Related equipment for command and control. d. Complete unmanned aerial vehicle systems (including cruise missile systems, target drones and reconnaissance drones) e. Light weight Turbojet and turbofan engines (including turbo compound engines). f. Ramjet / Scramjet / pulse jet/ combined cycle engines, including devices to regulate combustion, and specially designed components. g. Complete unmanned aerial vehicle systems having an autonomous flight control and navigation capability or capability of controlled flight out....
X X X X Extracts X X X X
X X X X Extracts X X X X
....surement device (example: an attitude and heading reference system, inertial reference unit, or inertial navigation system); one or more external sensor used to update the position and/or velocity, either periodically or continuously throughout the flight (example: satellite navigation receiver, radar altimeter and/or Doppler radar); integration hardware and software 5C008 Production equipment and other test, calibration and alignment equipment, designed or modified to be used with equipment specified in 5C001 - 5C004 and 5C007. 5C009 Equipment used to characterize mirrors for laser gyros such as scatterometer, reflectometer and profilometer and for other inertial equipments such as Inertial measurement unit (IMU Module) tester, IMU Platform tester, IMU stable element handling fixture, Gyro tuning test station, Gyro dynamic balance station, Gyro run-in/motor test station, Gyro evacuation and filling station, Centrifuge fixture for gyro bearings, Accelerometer axis align station and Accelerometer test station. 5C010 Avionics equipment and embedded or specially designed software and components thereof, including but not limited to: a. Radar and laser radar system....
X X X X Extracts X X X X
X X X X Extracts X X X X
....d/or signal information 5C018 Position tables (equipment capable of precise rotary positioning in any axes) having two axes or more and a position accuracy equal to or better than 5 arc second 5C019 Centrifuges capable of imparting accelerations and having slip rings capable of transmitting electrical power and signal information 5C020 Design technology for integration of air vehicle fuselage, propulsion system and lifting control surfaces designed or modified for the unmanned aerial vehicle systems to optimize aerodynamic performance throughout the flight regime of an unmanned aerial vehicle system 5C021 Design technology for integration of the flight control, guidance, and propulsion data into a flight management system, designed or modified for the complete rocket systems, unmanned aerial vehicles and cruise missiles for optimization of the trajectory. 5C022 Technology for the development, production, or use of items in 5C. 5C023 Software for the development, production and use of items in 5C. 5C024 Software specially designed or modified for use in the systems specified in 5C. 5D Manned-aircraft, aero-engines, related equipment an....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ed components and related equipment for non-military aircraft or aero-engines modified for military use applies only to those military components and to military related equipment required for the modification to military use. 5E Microlight aircraft and powered 'hang-gliders' Category 6 [Reserved] Category 7: Electronics, computers, and information technology including information security 7A Electronics 7A001 High-power microwave devices including tubes, travelling wave tubes (TWT) and phase shifters, and continuous wave and pulsed high power microwave travelling wave tube amplifiers (TWTA) operating at frequencies higher than 31 GHz, and their power supplies. 7A002 Microwave monolithic integrated circuits (MMIC) operating at frequencies above 3 GHz and surface acoustic wave (SAW) devices operating at frequencies above 2.5 GHz. 7A003 Phased array antennas and their elements 7A004 Radiation-hardened microprocessors, field programmable gate arrays and solid state memory devices 7A005 Microprocessor microcircuits, microcomputer microcircuits, microcontroller microcircuits, storage integrated circuits manufactured from a compound s....