Commissioning and commencement of operation of Mobile X-Ray Container Scanner (MXCS) at JNPCT Terminal; Procedure to be followed for containers selected for scanning at MXCS (Scan Mode-M1)
X X X X Extracts X X X X
X X X X Extracts X X X X
....eferred as MXCS) at JNPCT Terminal / Site of Jawaharlal Nehru Port has been successfully installed and commissioned. It will be fully functional from 30.03.2021 (Tuesday). 3. As the volume of Import Cargo is increasing exponentially at JN Port, the need to install more container Scanners was felt. It is further informed that this is a drive-by Scanner wherein 03-04 containers are aligned in a row and drivers need to get off the trailer and stay out of Radiation Zone during scanning process. This Scanner moves alongside the line of stationary trailer mounted containers and scan the same. 4. The administrative control of MXCS at JNPCT site will lie with the Container Scanning Division (CSD) headed by Additional / Joint Commissioner of Customs (CSD) which is located next to Port Users Building, Nhava-Sheva, Uran, Dist. Raigad-400 707. 5. Selection of Import Containers for scanning:- The scanning list is auto generated from ICEGATE, once the Shipping Lines / Shipping Agents file the IGM and entry inward is granted by Customs. The import containers which are to be scanned will be selected by the Container Selection Module (CSM) of the RMS on the basis of risk parameters. The....
X X X X Extracts X X X X
X X X X Extracts X X X X
....reas Regulations (HCCAR, 2009) vi. The Authorized carrier involved in movement of Customs Cargo under Sea Cargo Manifest and Transhipment Amendment Regulations (SCMTR), 2020 shall be responsible of the Movement or Handling of imported goods, its safety, security and delivery. 7. Procedure to be followed for Import Containers to be scanned at MXCS:- i. On receipt of the selected container at the MXCS Facility, the Head Hawaldar / Hawaldar / Sepoy / Traffic Marshals posted at MXCS shall physically verify the container number / Seal number and "Scan Mode" printed on the EIR / pick-up ticket with the number on the container and seal affixed on the container. If the same are found to be correct, the container shall be allowed in for positioning the containers for scanning in the designated area after detailed instructions to the driver such as- a. The weighment of the container shall be done before positioning; b. container is to be parked & aligned at the designated place for scanning; c. The driver need to alight from the vehicle before scanning and shall go out of the radiation zone and go to the safe room (driver's room) while the scan....
X X X X Extracts X X X X
X X X X Extracts X X X X
....icer concerned with his name and designation. 8. Procedure for clearance of containers pertaining to the RMS facilitated Bes i. In the case of facilitated BEs, Out of Charge (OOC) can be given at "DPD / RMS Facilitation Centre", only if the containers are scanned and marked as "Not Suspect" in the "IGM container scanned option" in ICES or marked as "Scanned clean" on the EIR / pick-up ticket . ii. No OOC shall be given if the containers selected for scanning are not scanned; or if it is marked as "Suspect" in the "IGM container scanned option" in ICES or marked as "Scanned suspicious" on the EIR / pick-up ticket. iii. All such BEs marked as "Suspect" in the "IGM container scanned option" in ICES or marked as "Scanned suspicious" on the EIR / pick-up ticket shall be marked to examination as per the laid down ICES roles and procedures. iv. These BEs shall be given OOC at the CFS only after the container marked as "Suspicious" is examined 100% under the supervision of DC/AC as per the existing procedure. For this purpose the scan image available in ICES or in the mail received from CSD shall be used. v. If there are more than one contain....
X X X X Extracts X X X X
X X X X Extracts X X X X
....examination and further clearance as per the existing procedure. iv. In case there is more than one container in the Bill of Entry and importer/CB has taken part delivery of containers not selected for scanning, it shall be the responsibility of the importer/CB to keep the seals of such containers intact and to produce the said Containers before Customs for examination. Concerned Group and Docks to ensure that action as mentioned above is taken in respect of all such containers covered by the said BE. 11. Where the containers are selected for scanning, but could not be scanned, due to non-functioning of MXCS: Containers selected for scanning at MXCS shall mandatorily be scanned at MXCS except when MXCS is not in operation due to any technical reasons / periodic Maintenance or any other reason. In such cases "NOT SCANNED AT MXCS" stamp is required to be endorsed on EIR / pickup ticket and containers should be brought to DTCS for scanning, by the Importer / CB in the case of DPD-DPD containers and CFS / Shipping lines in the case of DPD-CFS and Non DPD. 12. Non-generation of Scanning List: i. In the case of DPD-CFS and Non DPD containers, after completion o....
TaxTMI