TaxTMI 
TaxTMI 
Ensuring adherence of Indian Standard of respective Input material of Steel and Steel Products intended for import which are notified in QCO and requires mandatory registration on SIMS portal
X X X X Extracts X X X X
X X X X Extracts X X X X
....024-TECH on the above subject (copy attached). 2. Vide the above order dated 13.06.2025, it has been stated that presently 151 Indian Standards, covering steel and steel products of chapter 72 and 73 of ITC(HS) codes, are incorporated in the Steel and Steel Products (Quality Control) Order, 2024 (QCO) notified vide S.O 3716(E) dated 29.08.2024. In connection to compliance with QCO, adherence of Indian Standard of respective input material, which are also part of the QCO, shall be ensured. In respect of steel and steel products defined under aforesaid Indian Standards, respective Indian Standard(s) of input material is mapped (copy attached). This will be effective for the imports having Bill of Lading dated on or after 16th June 2025. 3. It is requested that necessary action may be taken to sensitize officers under your jurisdiction regarding the said matter. 4. The difficulties, if any, may be brought to the notice of the Board. Hindi version follows. Yours faithfully, (Neeraj Goyal) OSD (Cus-III) Email: [email protected] F. No. S-20011/15/2024-TECH Ministry of Steel Government of India Technical Division Udyog Bhawan, New Delhi Dated: 13....
X X X X Extracts X X X X
X X X X Extracts X X X X
....teel Sheets (Plain and Corrugated) - Specification. 5 IS 513 (Part 1): 2016 Cold reduced carbon steel sheets and strip: Part 1 Cold Forming and Drawing Purpose. IS 513 (Part 2): 2016 Cold reduced low carbon steel sheets and strip: Part 2 High Tensile and Multi- phase Steel. IS 1079: 2017 Hot Rolled Carbon Steel Sheet, Plate and Strip. IS 2062 :2011 Hot rolled medium and high tensile structural steel except for bars and rods of diameter or thickness less than 6 mm and structurals below (50 mm x 50 mm x 6 mm). IS 5986 :2017 Hot Rolled Steel Sheet, Plate and Strip for Forming and Flanging purposes. 8 IS 2002 : 2024 Steel plates for pressure vessels for intermediate and high temperature service including boilers. 1 IS 14650: 2023 Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification. 9 IS 2041 : 2024 Steel Plates for Pressure Vessels Used at Moderate and Low Temperature - Specification. 1 IS 14650: 2023 Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification. 10 IS 1786: 2008 High strength deformed steel bars and wires for concrete reinforcement- Specification except....
X X X X Extracts X X X X
X X X X Extracts X X X X
....d reduced low carbon steel sheets and strip: Part 2 High Tensile and Multi- phase Steel. 1 IS 11513: 2017 Hot Rolled Carbon Steel Strip for Cold Rolling Purposes. 21 IS 1079: 2017 Hot Rolled Carbon Steel Sheet, Plate and Strip. 1 IS 14650: 2023 Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification. 22 IS 2879: 1998 Mild steel for metal arc welding electrodes. 1 IS 2879: 1998 (for wire rod and bar) Mild steel for metal arc welding electrodes. 23 IS 5872: 2025 Steel strapping for packaging 3 For grade 2 & 3 in hot rolled condition - a)IS 1079: 2017 & b) IS 11513: 2017 a)Hot rolled carbon steel sheet, plate and strip - Specification b)Hot rolled carbon steel strip for cold rolling purposes - Specification For grade 2 & 3 in cold rolled condition - a) IS 513 (part 1 ): 2016 a)Cold reduced carbon steel sheet and strip: Part 1 Cold forming and drawing purpose For grade 1 & 4 in hot rolled and cold rolled condition - Not applicable 24 IS 5986: 2017 Hot Rolled Steel Sheet, Plate and Strip for Forming and Flanging purposes. 1 IS 14650: 2023 Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....67 Alloy Steel billets, blooms and slabs for forging for general engineering purposes. NA Not applicable Not applicable 38 IS 4454 (Part 1): 2001 Steel wires for mechanical springs, Part 1 cold drawn unalloyed steel wire. 1 IS 7904: 2018 High Carbon Steel Wire Rods - Specification. 39 IS 4454 (Part 2): 2001 Steel wire for mechanical springs Part 2: oil hardened and tempered steel wire. 2 IS 7904: 2018 High Carbon Steel Wire Rods - Specification. IS 5517: 1993 Steel for hardening and tempering -Specification. 40 IS 4824: 2022 Bead Wires for Tyres. 1 IS 7904: 2018 High Carbon Steel Wire Rods - Specification. 41 IS 11169 (Part 1): 2022 Steels for Cold Heading/ Cold extrusion application Part-1 Wrought carbon and low alloy steels. 1 IS 14650: 2023 Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification. 42 IS 11587: 1986 Structural Weather resistant steel. 1 IS 14650: 2023 Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification. 43 IS 15103: 2002 Fire resistant steel - Specification. 1 IS 14650: 2023 Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes....
X X X X Extracts X X X X
X X X X Extracts X X X X
....2012 (for cold rolled) Low Nickel Austenitic StainlessSteel Sheet and Strip for Utensils and Kitchen Appliances - Specification. 52 IS 1110 : 2023 Ferrosilicon - Specification. NA Not applicable Not applicable 53 IS 4409: 2023 Specification for Ferronickel. NA Not applicable Not applicable 54 IS 1029: 1970 Specification for Hot rolled steel strip (bailing). 1 IS 14650: 2023 Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification. 55 IS 2385: 1977 Specification for Hot-rolled mild steel sheet and strip in coil form for cold-reduced tinplate and cold-reduced black plate. 1 IS 14650: 2023 Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification. 56 IS 3039 : 2024 Structural Steel for Ship Construction-Specification 1 IS 14650: 2023 Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification. 57 IS 9550 : 2024 Bright Steel Bars - Specification 11 IS 7283 Hot Rolled bars for production of bright bars and machined parts for engineering applications. IS 5517: 1993 Steel for hardening and tempering -Specification. IS 4431: 1978 Specification ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ensile structural steel except for bars and rods of diameter or thickness less than 6 mm and structurals below (50 mm x 50 mm x 6 mm). 64 IS 1673: 1984 Specification for Mild Steel Wire, Cold Heading Quality. 2 IS 7887: 1992 1. Mild steel wire rods for general engineering purposes. IS 11169(part-1): 2022 Steels for Cold Heading/ Cold extrusion application Part-1 Wrought carbon and low alloy steels 65 IS 1812: 1982 Specification for Carbon Steel Wire for the Manufacture of Wood Screws. 1 IS 7887: 1992 Mild steel wire rods for general engineering purposes. 66 IS 2507: 1975 Specification for Cold - rolled Steel Strips for Springs. NA Not applicable Not applicable 67 IS 2255: 1977 Specification for Mild Steel Wire Rod for the Manufacture of Machine Screws (By Cold Heading Process). 2 IS 7887: 1992 1. Mild steel wire rods for general engineering purposes. IS 11169(part-1): 2022 Steels for Cold Heading/ Cold extrusion application Part-1 Wrought carbon and low alloy steels 68 IS 3195: 1992 Steel For the Manufacture of Volute and Helical Springs (for Railway Rolling Stock) - Specification. 1 IS 14650: 2023 Carbon Steel Cast Billet Ingots Billets Blooms and Slab....
X X X X Extracts X X X X
X X X X Extracts X X X X
....bon steel razor blades. NA Not applicable Not applicable 80 IS 9962: 1981 Specification for Steel Wire for Needles. 2 IS 7904: 2018 High Carbon Steel Wire Rods - Specification. IS 7887 : 1992 Mild steel wire rods for general engineering purposes. 81 IS 14331: 1995 Steels for High Temperature Bolting Applications - Specification. 1 IS 14650: 2023 Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification. 82 IS 14650: 2023 Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification. NA Not applicable Not applicable 83 IS 4882: 1979 Specification for Low Carbon Steel Wire for Rivets for Use in Bearing Industry. 2 IS 7887 : 1992 Mild steel wire rods for general engineering purposes. IS 11169(part-1): 2022 Steels for Cold Heading/ Cold extrusion application Part-1 Wrought carbon and low alloy steels 84 IS 2090: 1983 Specification For High Tensile Steel Bars Used in Pre-stressed Concrete. 1 IS 14650: 2023 Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification. 85 IS 6529: 1996 Stainless Steel Blooms Billets and Slabs for Forging. NA Not app....
X X X X Extracts X X X X
X X X X Extracts X X X X
....e Fabric for Concrete Reinforcement. 1 IS 432 (Part 2): 1982 Specification for Mild steel and Medium Tensile steel bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire. 97 IS 11946: 1987 Soft Magnetic Iron Strips. 1 IS 11513: 2017 Hot Rolled Carbon Steel Strip for Cold Rolling Purposes. 98 IS 11947: 1987 Soft Magnetic Iron Rods, Bars, Flats and Sections. 1 IS 14650: 2023 Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification. 99 IS 963: 1958 Chrome molybdenum steel bars and rods for aircraft purposes. 2 IS 1875: 1992 Carbon steel billets, blooms, slabs and bars for forgings. IS 14650: 2023 Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification. 100 IS 4454 (Part 4): 2001 Steel Wires for Mechanical Springs - Part 4: Stainless Steel Wire. 1 IS 6603 : 2024 Stainless Steel Bars and Flats. 101 IS 1993: 2018 Cold-reduced Electrolytic Tin Plate. 1 IS/ISO 11951: 2016 Cold - Reduced Tinmill Products - Blackplate. 102 IS 12591: 2018 Cold reduced electrolytic chromium / Chromium oxide - coated steel. 1 IS/ISO 11951: 2016 Cold - Reduced Tinmill Product....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ts Blooms and Slabs for Re- rolling purposes- Specification. 116 IS 9485: 1980 Specification For Cold-Reduced and Hot-Rolled Carbon Steel Sheet for Porcelain Enamelling. 2 IS 14650: 2023 (for hot rolled) Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification. IS 9485: 1980 (for cold rolled) Specification For Cold-Reduced and Hot-Rolled Carbon Steel Sheet for Porcelain Enamelling. 117 IS 10794: 1984 Specification for Mild Steel Wire for Cotter Pins. 1 IS 7887: 1992 Mild steel wire rods for general engineering purposes. 118 IS 12262: 1988 Specification for Trapezoidal Steel Wire for Springs Washers. 1 IS 7904: 2018 High Carbon Steel Wire Rods - Specification. 119 IS 15911: 2010 Structural Steel (Ordinary Quality)-Specification. 1 IS 14650: 2023 Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification. 120 IS 4431: 1978 Specification for Carbon and Carbon-Manganese Free-Cutting Steels. 1 IS 4431: 1978 (for bars) Specification for Carbon and Carbon-Manganese Free-Cutting Steels. 121 IS 4432: 1988 Specification for Case Hardening Steels. 1 IS 4432: 1988 (for bars and rods) Specific....
X X X X Extracts X X X X
X X X X Extracts X X X X
....d reduced carbon steel sheets and strip: Part 1 Cold Forming and Drawing Purpose. IS 513 (Part-2): 2016 Cold reduced low carbon steel sheets and strip: Part 2 High Tensile and Multi- phase Steel. 133 IS 16732: 2019 Galvanized Structural Steel - Specification. 1 IS 2062: 2011 Hot rolled medium and high tensile structural steel except for bars and rods of diameter or thickness less than 6 mm and structurals below (50 mm x 50 mm x 6 mm). 134 IS 17111: 2019 (ISO 683- 17: 2014) Heat-Treated Steels Alloy and Free-Cutting Steels - Ball and Roller Bearing Steels. 1 IS 14650: 2023 Carbon Steel Cast Billet Ingots Billets Blooms and Slabs for Re- rolling purposes- Specification. 135 IS 12594: 1988 Hot-dip Zinc Coating on Structural Steel Bars for Concrete Reinforcement - Specification. 3 IS 1786: 2008 High strength deformed steel bars and wires for concrete reinforcement- Specification except for High strength deformed steel bars and wires of sizes less than 8 mm. IS 2062: 2011 Hot rolled medium and high tensile structural steel except for bars and rods of diameter or thickness less than 6 mm and structurals below (50 mm x 50 mm x 6 mm). IS 432 (Part1): 1982 Spec....