Electronic Sealing - deposit in and removal of goods from Customs Bonded warehouses

1. Search Case laws by Section / Act / Rule — now available beyond Income Tax. GST and Other Laws Available

2. New: “In Favour Of” filter added in Case Laws.

Try both these filters in Case Laws →

Electronic Sealing - deposit in and removal of goods from Customs Bonded warehouses

X X X X Extracts X X X X

....ulations, 2016, the Special Warehouse (Custody 8s Handling of Goods) Regulations, 2016, Warehoused Goods (Removal) Regulations 2016 and circular 17 / 2016-Cus prescribe the affixation of a one-time-lock for transport of goods to be deposited in a warehouse or removed therefrom. 3. The regulations require that goods arriving at the warehouse from a customs station shall be affixed with a one-time lock with its serial number endorsed upon the bill of entry for warehousing and the transport document. The warehouse keeper or bond officer, as the case may be, is required to inspect the seal and when it is found intact, permit the goods to be unloaded at the warehouse. Circular 17/2016-+Cus dated 14.05.2016 prescribes that in case of removal of ....

X X X X Extracts X X X X

....olt Seal) As prescribed under circular 36/2017 Customs dated 28.08.2017 (b) For Closed body vehicles (RFID Wire Cable Seal) (i) Each seal shall be a one-time-lock bearing a unique serial number and brand of the vendor in the format ABCD XXXX XXXX, where ABCD starts for the brand of the Vendor and X (8 digit) is a numerical digit from 0-9. (ii) The RFID seal shall conform to ISO 17712:2013 and 1SO/IEC 18000-6 Class 1 Gen 2 which is globally accepted in industrial applications and can be read with the use of UHF- (i.e. 860 MHz to 960 MHz) Reader-Scanners. (iii) The manufacturer or vendor, as the case may be, shall be in possession of certifications required for conformance of The ISO standard ISO 17712:2013 namely, clauses 4, 5 and ....

X X X X Extracts X X X X

....) Bill of Entry Number (iii) Date (iv) Warehouse code (origin) (v) Warehouse code (destination) (vi) RFID OTL Number (vii) Date of Sealing (viii) Time of Sealing (ix) Container Number (where cargo is containerized or else Not required) (x) Registration number of vehicle 5.5 Procedure (a) The licensees of customs bonded warehouses shall have to procure Readers for scanning of RFID OTLs at the bonded warehouse at their own cost. (b) The licensee shall also procure RFID OTLs from the vendors for providing the same to importer, owner, exporter or in case of private bonded warehouses for their own use. (c) The vendors shall be required to provide Readers to Customs locations. Readers already deployed by vendors to Ports an....

X X X X Extracts X X X X

....rehouse, the RFID OTL is found to be tampered, then the licensee shall not permit unloading of the goods and shall inform the bond officer as per sub-regulation 5 (1) and (7) of the Warehouse (Custody 8& Handling of Goods) Regulations, 2016. (k) Under Regulation (5) of the warehoused Goods (Removal) regulations 2016, the importer or owner is required to produce an acknowledgement of the due arrival of goods. A period of one month (or as extended by the bond officer) has been provided under the regulations for producing the acknowledgement, failing which, the owner of the goods is required to pay full duties along with interest, fine penalty. With introduction of procedure contained in the circular 19/2018 dated 18.06.2018, the "trip ....

Contact Us At :

FAQs :

Most Asked Video Tutorials :

Submit Feedback/Suggestion :

Electronic Sealing - deposit in and removal of goods from Customs Bonded warehouses