TaxTMI 
TaxTMI 
SUB : Forwarding of samples for testing to the Outside Laboratories- reg.
X X X X Extracts X X X X
X X X X Extracts X X X X
....tions where such samples could be tested. The list of such items and corresponding testing Laboratories are annexed herewith. 4. The Revenue Laboratories are, presently, in the process of up-gradation. However, until Revenue Laboratories are upgraded, as a measure of trade facilitation, the Board has decided that field formations may directly forward samples of goods mentioned in column (3) of the Annexure-1 of the Board Circular No. 43/2017 dated 16.11.2017, to the laboratories mentioned in column (4) of the said Annexure. 5. The procedure for forwarding the samples to the laboratories shall be as follows: a. JNCH follows the respective standard sampling technique as prescribed by the concerned laboratory for the items under question. For any new items / goods, officers have been directed to ascertain sampling requirement with the laboratory concerned before drawing samples from the consignment. The sampling requirements has been specified in column no 5 of enclosed Annexure. b. In cases of live consignments which cannot be cleared without getting the test reports due to its hazardous nature or for any other reason, the samples will continue to be forwarded....
X X X X Extracts X X X X
X X X X Extracts X X X X
....97569, 2394268/96, wherever applicable, shall also be sterilized whenever samples are drawn for testing microbiological +91 2394750, Fax: mail: [email protected]. 484 2394909, E- requirements. The sample containers shall be of such size that they are almost filled by the sample. Samples in containers shall be stored and transported in such a manner that there is no deterioration of the material. For frozen fish, temperature of storage transportation shall be -20"C. If samples are not immediately analysed, these shall be stored and transported without any direct contact with ice. In the case of canned produce the sample cans shall be stored and transported to the laboratory without any appreciable difference in the temperature. Samples shall be sent to the laboratory for testing as early as possible. Each sample container, after filling shall be sealed air-tight with a stopper or a suitable closure in such a way that it cannot be opened and resealed without detection. It shall be marked with fill details of sampling, such as date and place of sampling, name of the vendor and other import dt particulars of the consignment. Quality....
X X X X Extracts X X X X
X X X X Extracts X X X X
....f the containers sampled from the lot, shall be taken from different sides and depths (top, middle and bottom) so as to obtain representative quantity of material. • If required, the containers selected from the lot shall be completely emptied and content mixed before taking increments. • If the containers are packed in case, 5 percent of the cases subject to minimum of 2 shall be selected and approximately equal number of containers selected from each so as to constitute the requisite sample size. • The quantity of material obtained in the gross sample shall be suitably reduced by the procedure of coning and quartering so as to obtain the laboratory sample. • For coning and quartering, the material shall be heaped into the shape of a cone by pouring scoopful of the material one after another at the apex of the cone till entire gross sample has been coned. The material shall be allowed to slide down the sides of the cone only under the influence of gravity. The cone shall be evenly flattened so that it forms a low circular pile. The pile shall be cut into four quarters along two diameters which intersect ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....t-cock not being available, use a convenient container and withdraw approximately 0.5 kg portions from the discharge end of the pipe at regular intervals as the product is entering or leaving the tank wagon. 2. Oils in Barrels, Casks, Drums and Tierces:- Liquid or semi-solid oils - Roll the container to mix the contents and insert the sampling tube slowly through the bung hole or any other convenient opening. If possible, the sample should be drawn from end to end. As soon as the tube is fully inserted, close the upper constriction with the thumb or a stopper, withdraw the tube and transfer the sample into a clean dry container. Take several portions in this manner from this and other packages. Mix thoroughly. The sample containers should be almost but not completely filled. The sample containers shall be sealed with sealing wax in such a manner that it is not possible to remove the contents and the label without breaking the imprint of the seal. The minimum size for each test sample shall be 0.5 kg. Rubber stopper should not be used to close the containers. In case of glass containers, glass stoppers or new good quality velvet corks should be....
X X X X Extracts X X X X
X X X X Extracts X X X X
....clean and dry when used. The samples, the material being sampled, the sampling instrument and the containers for samples shall be protected from adventitious contamination. • To draw a representative sample, the contents of each container selected for sampling shall be mixed as thoroughly as possible by shaking or stirring or both, or by rolling so as to bring all portions into uniform distribution. • The samples shall be placed in suitable, clean, dry and air-tight metal of glass containers, on which the material has no action. • The sample containers shall be of such a size that they are almost, but not completely, filled by the sample. • Each sample container shall be sealed air-tight with a glass stopper after filling, and marked with full details of the sample and the date of sampling. 1. Sampling from Tank/Tanker - Take equal portions of the material from different layers of the tank/tanker with the help of the sampling can to obtain a quantity not less than 2.5 liters and mix thoroughly in a suitable container which is dry and clean, to obtain a composite sample for the tank/tanker. Divide th....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... in dried bottles or other containers,, seal air-tight and label with all the particulars of sampling. Similar to procedure as provided for sampling of “pure ghee†(Sl. No. 7.) http://164.100.155.199/pdf/is.4307.1983%20fish%20meal.pdf • • Samples shall be taken in a protected place, not exposed to damp air, dust or soot. The sampling instruments shall be clean and dry, when used. Precautions shall be taken to protect the samples, the material being sampled, the sampling device and the containers for samples from adventitious contamination. • The samples shall be placed in clean dry containers. The sample containers shall be of such size that they are almost completely filled by the sample. • Each container shall be sealed air-tight with a stopper or a suitable closure in such a way that it will not be possible to open or reseal it without detection after filling, and marked with full details of sampling, date of sampling, name of the vender and other important details of the consignment. . The samples shall be analysed as soon as possible. If necessary, sample shall be stored in such a mann....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ng and Fuel Research (CIMFR), http://164.100.155.199/pdf/is.436.1.1.1964%20coal.pdf Nagpur, (Under Ministry of Science & Technology) CSIR- CIMFR, Barwa Road, Dhanbad 826015, Jharkhand, INDIA • For the purpose of sampling, the entire quantity of coal in a ship shall be divided into .a suitable number of sub-lots of approximately equal weight as under: NUMBER OF SUB-LOTS/GROSS SAMPLES Weight of the Lot (METRIC TONNISE) up to 500 No. of sub-lots / gross samples 2 501 to 1000 3 1001 to 2000 4 2001 to 3000 Over 3000 5 6 A gross sample shall be drawn from each of the sub-lots and shall be kept separately so that there will be as many gross samples as the number of sub-lots into which the lot has been divided. • Sampling of coal from ships-shall be carried out, as far as practicable, when coal is in motion. If it is taken on a conveyer, the gross sample shall be collected as per the procedure laid down in 3, If not, the gross samples may be drawn during loading or unloading of the ship. For this purpose, the number of increments to be taken shall be governed by the weight of the gross sample an....
X X X X Extracts X X X X
X X X X Extracts X X X X
....and above 8 13 Composite sample - From each of the packages selected for sampling a small quantity of material shall be withdrawn with the help of a sampling tube in accordance with the procedure given in below. The quantity so withdrawn from each of the packages shall be fully representative and proportional to its contents. The material withdrawn from all the packages shall be thoroughly mixed together and then the requisite quantity for testing shall be withdrawn. This shall be the composite sample. An identical composite sample if required. may also be made for keeping as reference sample under the joint seals of the purchaser and the seller. If the composite sample passes in respect of all the requirements of the specification the lot may be considered to be in conformity to the requirements of the specification. A sampling tube of convenient size shall be lowered into the package so that it touches the bottom, and a sample obtained by closing the top end of the tube with the thumb and withdrawing the tube. If the tube contains free water its contents shall be rejected and the tube again lowered into the package to such a depth as t....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ribed in "Manual on Sampling, Analysis and Characterisation of hazardous waste" issued by Central Pollution Control Board. Indian Institute of Chemical Technology (ICT), Sampling to be done as per guidelines issued by JNCH vide S.O. No. 17/2009 JNCH, dated 21.04.2009. Hyderabad, (Under Ministry of Science & Technology) CSIR-Indian Institute of Chemical Technology, Uppal Road, Tarnaka, Hyderabad - 500 007, Telangana State, India National Chemical Laboratory (NCL), Pune (Under Ministry of Science & Technology) CSIR-NCL, Dr.Homi Bhabha Road, Pune 411008, India. 12 29 13 30 30. Oxo Erythronolide A- 11,12 Carbamate 31. Acid Buff 32. Rynaxypyr Tech. 33. Linear Alpha Olefins 34. PCTP-B Indian Institute of Chemical Technology (IICT), Sampling to be done as per guidelines issued by JNCH vide S.O. No. 17/2009 JNCH, dated 21.04.2009. Hyderabad, (Under Ministry of Science & Technology) CSIR-Indian Institute of Chemical Technology, Uppal Road, Tarnaka, Hyderabad - 500 007, Telangana State, India 35. EC100 36. 6-Nitro Diazo 2-Naphthol Acid 37. Exxsol Hexane Fluid 38. Neo Pentyl Glycol Flakes 39. PTA 40. ....
X X X X Extracts X X X X
X X X X Extracts X X X X
..... Montelucast Sod Tab 48. FE-3 Hydroxylpoloymontex Complex 49. Omeprazole Pellets 50. Lansoprazole Pellet 51. Fexofenadine HCl 52. Esomeprazole di hydrate 53. Coba-1 54. Cyte-7 55. Carvedilol 56. Sparfloxacine 57. Tamsulosin HCl Pellet 58. Norfloxacine 59. Dextromethorphan 60. Sildenafil Citrate 61. Telmeisartany 62. Ciprofloxacine HCl 63. Itraconazole Pellet 64. Panto Prazole Sodium 65. Divalproex Sodium 66. Toltuosin Tastrater Pellet 67. CTAC (DFA-SCI) 68. Fluoxetine HCl 69. CAINL-5 2783392, FAX: 0120-2783311, E-mail: [email protected], Website: www.ipc.gov.in Central Drug Testing Laboratory (CDTL), Chandigarh, Chennai, Hyderabad, Mumbai (Under Ministry of Health & Family Welfare) Central Drugs Standard Control Organization (CDTL and CDL), Directorate General of Health Services, Ministry of Health and Family Welfare, Government of India, FDA Bhavan, ITO, Kotla Road, New Delhi 110002. Phone: 91-11-23216367(CDSCO)/ 23236975, Fax: 91-11-23236973, E-mail:- [email protected], 91- (522)-2771941 Central Drug Laboratory (CDL), Kolkata (Under Ministry of Health & Family Welfare) Central D....
X X X X Extracts X X X X
X X X X Extracts X X X X
....riculture, Cooperation and Farmers Welfare, Ministry of Agriculture and Farmers Welfare, Government of India, Sector 19, Hapur Road, Kamla Nehru Nagar, GHAZIABAD 201002, Uttar Pradesh Tel: 0120-2764906, 2764212; Fax:0120-2764901, Web: http://ncof.dacnet.nic.in, Email: [email protected] Process of sampling shall not unnecessarily be exposed to weather. The sampling equipments shall be clean, dry and should not be a source of contamination. The material being sampled, the sampling equipments and the containers for samples shall be protected from adventitious contamination. Metallic containers must be avoided. • To draw a representative sample from bagged fertilizer, the contents of each container selected for sampling shall be mixed as thoroughly as possible by suitable means. The sample immediately after being drawn shall be placed in wide-mouthed clean, dry and air- tight glass or other suitable containers for example PVC or polyethylene, which must not react with the sample. The sample containers shall be of such a size that they are almost completely filled by the sample (but not tightly packed). • Each sample contain....
X X X X Extracts X X X X
X X X X Extracts X X X X
...., Telangana State, India EPABX: +91-40- 27191234, Website: www.iictindia.org Sample shall not be taken at a place exposed to such weather as would affect basic change in its physico-chemical characteristics. • The sample container shall be properly labelled with necessary information such as: a) Name of the sample; b) Source of sample; c) Date/Time of sample; d) Drawn by; e) In the presence ofi and ~ Special precautions, if any. • Use of appropriate personal protective equipment (PPE) are strongly recommended during sampling. Never smell the sample or taste by tongue. Proper sampling tools/containers need to be used. Adhere to the local regulatory guidelines, if any during the sampling. The sample container shall be of such a size that they ahnost but not, completely filled by the sample. They shall be made of the material which shall not react with the contents of the sample. In other words the sample shall not change its. physiochemical characteristics in the container used. To draw a representative sample, the contents of each container selected for sampling shall be mixed thoroughly by suitable means or approp....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... (c) A sample shall be drawn from each container to be sampled with the sampling instrument which is inserted through a convenient opening in such a manner as to sample the entire depth of the contents. (d) All samples from the same consignment shall be put into a clean and dry receptacle, preferably of stainless steel. The contents of the receptacle shall be thoroughly mixed and the required sample drawn into a clean and dry sample container. (e) The sample container shall be closed, leaving sufficient air space at the top for expansion. On the other hand this space shall not be too large, as air exerts detrimental action. (f) All samples shall be protected from light and heat, and kept in a cool place. Similar to procedure as provided for sampling of “Fertilizers†(Sl. No. 75) 92. Mould Inhibitor 93. Electronic Cigarette Liquid 18 39 94. PVC Compound 95. PVC Off Grade 96. Polyethylene Compounds 97. Hostalen 98. Non Woven Tow Puff Sheets 99. Insole Sheet 100. Polyol Syncopol 101. Exter C1 Z1270 (Polyol) 102. LDPE Reprocessed 103. Recycled LDPE 104. Vista Maxx 6502 (Polypropylene Copolymer)....
X X X X Extracts X X X X
X X X X Extracts X X X X
....¢ 110. Floor Sweeping Granules HDPE 111. PE Sweeping Granules 19 40 C 112. Rubber Compound Grade 113. Recycled Rubber Mat The Rubber Research Institute of India, Kottayam, (Under Sampling to be done as per guidelines issued by JNCH vide S.O. No. 17/2009 JNCH, dated 21.04.2009. Ministry of Commerce & Industry) Ministry of Commerce and Industry, Govt. of India, Rubber Board PO, Kottayam 20 20 Square Tiles 114. ABS 4124 90/04 44 Reprocessed 115. Wood Powder 17 47 116. Rejected Mix Stock 117. Soft Wood/ Mechanical/ Kraft/Aspen/ BCTMP Pulp 686009, Kerala, India Ph: 91-481-2353311-20 (10 lines), Fax: 91-481-2353327, [email protected] Contact General: Forest Research Institute (FRI), Dehradun Forest Research Sampling to be done as per guidelines issued by JNCH vide S.O. No. 17/2009 JNCH, dated 21.04.2009. Institute (Deemed) University, Kaula Garh Road, PO. I.P.E., Dehradun 248195 Tel: 0135-2224439, 0135- 2751826, Email:[email protected] Central Wood Testing Laboratory, Rubber Board, Kottayam (Under Ministry of Commerce & Industry) Ministry of Commerce and Industry, Govt.....
X X X X Extracts X X X X
X X X X Extracts X X X X
....Industrial Press Board 123. Chemical Counter Sheet Non Woven Insole Board 124. Cellulose Insole Sheet 125. Recycled Polyester Staple Fiber 126. Polyester Staple Fiber Central Paper & Pulp Research Institute (CPPRI), http://164.100.155.199/pdf/is.1060.1.1966%20paper%20and%20products.pdf Saharnpur (UP) (Under Ministry of Commerce and • Industry) Director, CPPRI, Post Box 174, Paper Mill Road, Himmat Nagar, Saharanpur 247001, India Phone: (0132) 2714050, 2714061, 2714062, 2714059, Fax: (0132) 2714052, Email: [email protected], [email protected] Care shall be taken to select samples or portions of rolls or reels that are not damaged. It is good practice to discard a few outermost sheets of reams or the first few layers of roll or reel to be sure of obtaining representative samples. Textile Committee, New Delhi, Mumbai, Chennai, Kolkata, Jaipur (Under Ministry of Textiles) Secretary, Textiles Committee, Ministry of Textiles, Government of India, P Balu Road, Prabhadevi, Mumbai 400025 E-Mail: [email protected], [email protected], Phone: +91-22- 66527507, 66527506, Fax: +91-22-66527509 Central Institute of Plastic ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ting the bulk sample. Take about 1 000 g from well-mixed fibres; this shall constitute the gross sample. Divide the gross sample into 16 equal parts. Take a small quantity of fibres from each of the sixteen parts so as to make a total of 50 g approximately. This should constitute the test sample. The number of bales to be chosen at random from a lot shall be as given below. All the bales so selected shall be taken together to constitute the bulk sample: No. of bales in a Lot Up to 8 No. of bales to be chosen All 9 to 25 8 26 to 50 13 51 to 100 20 101 and above 25 24 24 89 68 25 69 ཅ༠127. Brake Lining 128. Valorzac (Refractory Cullet) 129. Zircoval Dn (Refractory Cullet) 132. Crystallized Glass Panel 26 26 70 130. Low e-glass 131. Glass Bead 133. Super Nano Glass Slab 27 72 134. Charged Chrome 135. Metal Scrap Central Glass & Ceramic Research Institute (CGCRI), Kolkata (Under Ministry of Science & Technology) CSIR- CGCRI, 196, Raja S.C. Mullick Road, Kolkata 700032, West Bengal, India Fax/E-mail: Director's Office: +91 33 24730957/ dir of....