TaxTMI 
TaxTMI 
Launch of Indian Customs EDI System- (ICES 1.5) for Imports and Exports, at Redi Port (INRED1), Redi Village, Taluka : Vengurla, Redi - 416 517, Maharashtra – reg.
X X X X Extracts X X X X
X X X X Extracts X X X X
....zed environment. Certain declarations and certificates, etc., in original, wherever required shall continue to be attached with the assessed copy of the Bill of Entry when the same is presented in the Import Shed for the clearance of goods. The requisite documents also can be called for by the Appraising Group, if required, while acting on the Bills of Entry. There are certain pre-requisites for filing the electronic declarations which are required to be complied with before filing the Bill of Entry. 1.1 Registration of IE-Code of the Importer (i) IE-Code is being issued to the importers by DGFT, details of which are transmitted online to the Indian Customs EDI-System (ICES) on a daily basis. ICES automatically register the IE-Codes after confirming its validity to enable the importers to file the Bill of Entry electronically. Before filing the Bill of Entry, the importers are advised to check from the DGFT as to whether their IE-Code has already been transmitted to ICES. If their IE-Code has not been transmitted to the ICES by the DGFT, they should first get the same transmitted from DGFT, failing which they will not be able to file Bill of Entry electronically for the clear....
X X X X Extracts X X X X
X X X X Extracts X X X X
....Customs Broker/Importer from any Nationalized Bank. Only this exchange rate should be entered in the system in the respective field while making entry of B/E data and should be presented along with assessed copy of B/E at the time of taking out of charge, to the Customs officer. 1.5 Currency Codes For indicating value of goods, freight, insurance, commission, etc., codes specified against the respective currencies indicated in the list of currency codes appended with this Public Notice should only be used. Incorrect code will result in incorrect conversion of Indian Rupees. List of Currency Codes attached as Appendix-4. 1.6 Units of Measurement Codes Against any quantity of goods, appropriate Code indicated against the respective measurement in the list appended with this Public Notice should only be used in the Bill of Entry and IGM, as the case may be. It is further informed that if UQCs, other than the Standard UQCs of the customs tariff are used, the B/E may not get any facilitation in RMS. Reference is also invited to the CBEC Circular No. 26/2013 -Customs, dated 19/07/2013, where adherence to Standard Unit Quantity Codes as prescribed in the Customs Tariff Act has....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ill of Entry/Shipping Bill having up to five items: Rs. 80 (ii) Each Additional Block of five items: Rs. 10 (iii) IGM: Rs. 80 (iv) EGM: Rs. 80 (v) Other documents (such as UAB, Transshipment etc) : Rs. 80 (vi) Amendments to original declaration by customer in BE/SB/Other documents: Rs. 10 (vii)Queries (including reply feeding): Nil - for 3 queries and Rs. 10 for each query thereafter. (viii) Printing check list: NIL (ix) Printing of assessed documents (SB/BE/ OOC/ LEO/Challan etc): NIL II. SERVICE CHARGES FOR 'RES' DOCUMENTS ICEGATE or any other manner of Remote EDI filing: (i) Printing of Document: Rs. 30 [for the first 50 pages and Rs. 10 for every 10 subsequent pages or parts thereof (documents refers to the set of papers, which get printed in one command at any stage of processing)] (ii) Query Printing: Rs. 10 (iii) Amendments fee to Bill of Entry (for block of five items):Rs.20 (iv) Amendments fee to Shipping Bill (for block of five items):Rs.10 (v) Amendment fee - Each Additional block of five items: Rs. 10 (vi) Amendment fee - Other documents: Rs. 10. (vii) Printing Check list: Rs. 10 Note 1:- The above charges are exclud....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ry Inwards in System do not require Assistant Commissioner (Import)'s approval and the same can be carried out. (ii) All such amendments made after grant of Entry Inwards will require Assistant Commissioner (Import)'s approval. (iii) IGM messages to custodians would be sent at the time of grant of entry inwards instead at the time of online submission, so that substantially complete IGM is sent to custodian. (iv) Since the IGM messages based on the TP approval messages are sent from Gateway Port to ICDs, the filing of Consol Manifest and IGM amendment for the Transshipment cargo to ICDs should be carried out at Redi Port. Separate filing of consol manifest and amendment of IGM at ICD Port is not required. 3. Cargo/Goods Declaration The Importer or the Customs Broker, as the case may be, can file electronic Bill of Entry by data entry at the service centre operator or by transmitting the details in specified file format through ICEGATE from his premises. 3.1 Filing through Service Centre (i) The Customs Broker/Importer should furnish information in 'Annexure C' and present the same to the service centre operator along with copy(ies) of import invoice and pac....
X X X X Extracts X X X X
X X X X Extracts X X X X
....9). This entry would be described as: - Generic Description CTH Notfn./Year, Sr. No L37/19, Nebulizers 90189093 021/02, Sr.No.363 (viii) The Service Centre Operator shall carefully enter the data in the system as is indicated in Annexure 'C'. On completion of entry of data, the system shall assign a Job No. and generate a Check List which is a draft Bill of Entry. The service centre operator shall print a copy of the Check List and hand over the same to the Customs Broker/Importer. The Customs Broker/Importer shall check the correctness of the data entered in the system. If any error is noticed, the error shall be circled in bold ink and correct detail should be written. The corrected check list duly signed by the Customs Broker/Importer should be handed over to the service centre operator for entry of corrected data. The Operator shall make corrections in the corresponding data and hand over the revised checklist to the Customs Broker/Importer for re-confirmation. This process would be repeated till the Customs Broker/Importer signs a clean checklist in token of correctness of the entered data. (ix) The Operator shall submit the authenticated elec....
X X X X Extracts X X X X
X X X X Extracts X X X X
....n List (CRL) status and the result of authentication and integrate the data into ICES database. The data so integrated will also have a flag to indicate that the submitted document was digitally signed. (v) The Customs officers will be able to identify on the system whether a particular electronic document has been filed after signing with Digital Signature Certificate or not; (vi) On successful submission of data from their premises the ICES will generate Bill of Entry Number and return message of Bill of Entry No. If invalid data is entered an error message shall be generated and no B.E. No. shall be generated. In case of remote filing of Bill of Entry the Customs broker /Importer has to ensure correctness and validity of data entered failing which the data will either be rejected by the ICES or incorrect information shall be incorporated in the submitted Bill of Entry which shall lead to problems of amendments. Remote EDI filing software from NIC website link has been provided at ICEGATE website. Software of NIC is free of charge. (vii) The instructions specified in 3.1 (iii) to (vii) may be kept in mind while Filing in RES software too. 3.3 Self Assessment The bi....
X X X X Extracts X X X X
X X X X Extracts X X X X
....for claiming exemption from duty, etc. Bills of Entry in Group 7 require production of duty exemption import license by the importer. Therefore, processing of Bills of Entry will be taken up by the appraising officer only on receipt of the required documents. (iv) Movement of Bills of Entry from one officer to another takes place automatically in a pre-determined workflow basis depending on roles and jurisdiction assigned to them. During the processing of Bill of Entry, the officer concerned may raise Query to the importer for further clarification/information. The Query on approval by the concerned AC/DC shall be transmitted to the importer for online reply. Such a Bill of Entry on which query has been raised, is automatically pulled out of assessment queue till reply online/through service center is received from the importer. 4.1 RMS facilitation. Facilitation of Bills of Entry in respect of certain goods using RMS for faster clearance of such goods Bills of Entry in respect of the items under RMS facilitation would be assessed for risk by the System immediately on their submission and a print out of the assessed Bill of Entry along with 3 copies of TR-6 challans wil....
X X X X Extracts X X X X
X X X X Extracts X X X X
....he AC/DC, a first check Bill of Entry copy shall be printed. Customs Broker/ importer gets a copy of First Check B/E printed with 'Examination Order' at the 'Service Centre' or in his office, as the case may be. (ii) After the examination is completed, the Import Shed Examiner/Inspector and Appraiser/Superintendent shall write the examination report on the first check copy of the Bill of Entry (Hard Copy of B/E) and enter the examination report in the system. The Shed Appraiser/Superintendent shall transfer the B/E to the Appraising Group. The Customs Broker/Importer shall present the first check copy of the Bill of Entry on which examination report has been written along with the original invoice and other import documents necessary for assessment to the concerned Group Appraiser/Superintendent. The Assessing Officer, if satisfied, shall complete the assessment of B/E in the system. After assessment, the Bill of Entry shall move in the system as in the case of second check assessment. The Customs Broker/Importer shall take print of assessed copy of the Bill of Entry and TR-6 challan and shall deposit duty amount with the designated bank. 4.4 Audit After completion of asse....
X X X X Extracts X X X X
X X X X Extracts X X X X
....oms duty mandatory. 5.2 Shipping Lines/Consol Agents in co-operation with Custodians shall provide the Delivery Order electronically in mutually agreed formats and they are not required to visit either of the offices. Secure electronic transmission of Delivery order between shipping lines/consol agents and the custodian will enhance the security and transparency of the cargo as well as expedite the clearance of the cargo. Please refer CBEC Circular No. 24/2015 dated 14/10/2015 regarding Improving Ease of Doing Business - Issuance of Electronic Delivery Orders. 6. Examination of Goods 6.1 After examination order in the case of First Check Bill of Entry, after assessment in the case of duty free import where duty assessed is zero and after payment of duty assessed with interest(if any) in case of second check Bill of Entry, the Bill of Entry shall move to the Examination section for goods registration. (i) The Customs Broker/Importer shall present the documents, as per the list below, (the documents should be arranged in a file cover in the following order):- a) Assessed copy of Bill of Entry b) Copy of Delivery Order& Bill of Lading c) Invoice in original d) ....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... 'out of charge'. Hence, only the certified photo copies of Delivery Order, Master Bill of Lading, House Bill of Lading should be attached instead of originals. 6.4 On the basis of the examination report, the Appraising Group may revise the assessment or raise a further query to the importers, if necessary. 6.5 After completion of the examination of the goods, if the Shed Appraiser/ Superintendent are satisfied that the requirement of Section 47 of the Custom Act, 1962 have been complied with, he shall give 'Out of Charge" for the Bill of Entry on system. 6.6 After the out of charge order, the system will generate print of Importer's copy and Exchange Control copy of the Bill of Entry along with 3 copies of Order of Clearance. Print of the same shall be obtained from the designated computer terminal. The print copies of the Bill of Entry shall bear the Order of Clearance number and name of the examining Appraiser/Supdt. The importer's copy of the Bill of Entry along with one copy of the order of clearance will be attached to the Customs copy of the Bill of Entry retained by the Shed Appraiser/Supdt. The importer shall present the remaining two copies of the order of cleara....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ong with the revised assessed Bill of Entry. 8.2 After Out of Charge Order, no amendment shall be allowed in the Bill of Entry. However, in case amendment is warranted after Out of Charge Order but before delivery of goods, the System Manager can cancel the out of charge Order in the system. The original prints of the Importer's copies and Exchange Control copies of the Bill of Entry shall be retained by the System Manager in a file. After fresh Out of Charge Order, new prints of the copies of Bill of Entry shall be given. 9. Re-assessment Any time after assessment and before Out of Charge Order, a Bill of Entry can be recalled and reassessed and put to reassessment by the AC/DC concerned, if it so warranted for any reason. 10. Advance Noting Advance B/E can also be filed in the ICES before the arrival of the vessel. In such cases, a B/E may be presented before the delivery of the import manifest, if the vessel by which the goods have been shipped is expected to arrive within 30 days from the date of presentation. The Customs Broker/ Importer may file an Advance B/E if he has the copies of the Bill of Lading and the invoice. The B/E would be filed and assessed in the....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... Exemption Notification 034/97-Cus., dated 7.04.1997 against a DEPB, the licence in question is required to be registered in the import system. The officer designated by the Asstt./Dy. Commissioner to register the DEPB in the system shall ensure that verification of DEPB with reference to the exports on the basis of which DEPB is issued by DGFT has been done prior to its registration in imports. (ii) All importers/CHAs are advised to ensure that their IEC details with PAN have been transmitted by DGFT to the Customs at the time of obtaining the DEPB. The Customs Broker/Importer shall furnish details of DEPB licence in the pro-forma given as ANNEXURE 'A'. (iii) The designated officer shall make data entry of the DEPB details in the system. After entry of data, a checklist will be printed. The DEPB holder shall verify the details of DEPB in the checklist sign the check list and return the same to the officer. The officer shall then complete the registration process in the System. After the DEPB is registered in ICES, a "registration number" shall be generated by ICES which will be endorsed on the face of the original DEPB in bold figures with the name of CUSTOMS STATION at whic....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... be signed by the DEPB holder and returned to the proper officer who will exercise the option for issue of TRA in the System. The System shall generate three copies of the Release Advice titled as: 1. Customs copy for port of issue (office copy), 2. Customs copy for port of clearance and 3. Importer's copy. (iv) The office copy for port of issue shall be retained by the TRA issuing Customs Station and placed in the respective TRA file. Customs copy for the port of clearance will be dispatched to the respective Customs Station and the importers copy of TRA shall be handed over to the applicant. (v) The requirement of production of original DEPB licence with incoming or outgoing TRAs at the respective port of clearance shall continue as per the instructions issued from time to time in this behalf. 11.5 Re-credit of unutilized Release Advices Any unutilized credit in the Release Advice may be re-credited to the DEPB by the Assistant/Deputy Commissioner. A certificate of unutilized portion shall be generated at the port for which the TRA had been issued on the basis of which the balance in the DEPB licence shall be re-credited by the TRA issuing authority. 11.6 ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....s are correct, the checklist may be returned to the data entry operator for submission of B/E in the System. Errors, if any, noticed may be got corrected by the data entry operator. 11.8 Submission of B/E On submission of the B/E in the System, an UN-ASSESSED copy of the B/E will be printed by the System containing statement of debit of DEPB for export FOB and duty amount in respect of each item of an invoice for which exemption is claimed against DEPB. 11.9 Assessment of B/E (i) The un-assessed copy of the B/E along with all the original import documents and all the DEPB licence/scripts in original indicating total amount of duty credit and export FOB utilized, in the debit sheet attached to the scrips, should be presented to the import Appraiser/Superintendent for assessment and signatures on the debit sheets of the DEPB scrips. The Appraiser/Supt. will retrieve the B/E on screen and assess the B/E in respect of all the items and shall countersign the debits in the original DEPB. The System will determine the duty amount on the basis of CIF/Quantity of goods and shall debit the duty from the DEPB credit ledger and the CIF from the FOB of Export. If sufficient balance ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ing of DEPB against Manual B/E (i) If a Bill of Entry is processed manually, importers may choose to avail the exemption under the DEPB Scheme and get the DEPB debited for exempted amount of duty. In such cases, manual B/E will be assessed as usual. After assessment, the amount of duty forgone due to exemption under DEPB and the CIF of goods imported being cleared against DEPB will be computed manually in respect of each DEPB scrip. (ii) The designated officer in the assessing group will debit the original DEPB. He will also enter the amount of duty foregone and the CIF of the exempted goods in the System, in the respective field of duty credit and export FOB. The debit screen can be accessed through the DEPB Registration Number. After debiting, the System will print the statement of debits of the DEPB in triplicate. The copies of this print will be attached with the manual B/E, DEPB file and DEPB scrip. Importers are therefore required to register the DEPB license even when clearances are sought against manually assessed B/E 12. Processing of B/E under Other Export Promotion Schemes Requiring Import Licence Bills of Entry relating to Export Promotion Schemes like DEEC/....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ping Bills and Licenses/Authorizations issued under Duty Entitlement Pass book Scheme (DEPB), Duty Exemption Scheme (DES) and Export Promotion Capital Goods Scheme (EPCG) from DGFT to Customs and vice versa through an Electronic Message Exchange System is in operation at all EDI Ports/ICES locations. (iii) The licences, which have already been partially utilized, will be registered in the system only for the balances available. (iv) After successful entry of details, a check list will be printed by the registration clerk and given to the licence holder for confirming the correctness of the data entered. Registration clerk will make correction, if any and will return the same to the licence holder. It is the sole responsibility of the licence holder to verify and confirm the correctness of the data entered before proceeding further. License should not be sent by post or through a letter to custom house but should be presented by a person who shall get the data entry done, verify the correctness of data on the check list and shall present the licence to the Appraiser for registration and take possession of the same after registration. 12.2 Acceptance & Debit of Bonds (i) ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....his registration number and date should be endorsed in bold on the original licence/TRA. After registration, the documents may be returned to the Importer and copies thereof may be kept in the office file for record. TRA will be registered only on the basis of Customs copy of the TRA. After registration, Customs copy and importer's copy of TRA will be defaced by the Officer. 12.5 Issuing TRAs Transfer Release Advice will be issued for utilization of a licence at any other Customs station. No TRA needs to be issued for Customs location operating of ICES Version 1.5. TRA shall be issued only for non-ICES location. All TRAs against the licences registered in the system shall only be generated from system. Details for obtaining Release Advice shall be furnished in the Format given at Annexure-'D'. Data entry will be done by the registration clerk. A check list will be printed for verifying the correctness by the applicant and for his signatures. Correction, if any, will be carried out by the registration clerk. The authorized Appraiser will thereafter verify the details from the original licence and satisfy himself about admissibility of issue of TRA. The system will generate TRA....
X X X X Extracts X X X X
X X X X Extracts X X X X
....nce, if suspended or cancelled after registration, the officer shall amend the status code to '2', '3' and '4' for cancellation, suspension and re-instatement respectively. 12.9 Filing of Bill of Entry (i) Licence Regn. No., Regn. Date details, value and the quantity should be furnished in respective column at S. No. 39.E of the Annexure 'C'. (ii) Unit of measurement of qty. will be the same as per the licence. In case the unit of measurement in the invoice is different than the one in the license, for the purpose of debit in the licence the qty should be converted in to same unit of measurement as in the licence. For spare parts against EPCG licence, S. No. of item will be '0' therefore, for availing benefits of exemption notification in respect of spares Item S. No. '0' should be indicated in column 9 of the Format indicated above. Against one item in the B/E, only one licence will be debited. If the Qty&/ or value in the licence is not sufficient to cover whole qty&/ or value of an item in the invoice, the invoice qty should be split in to a separate item in the B/E for debit against another license or for normal assessment. Bond/BG details should also be provided where....
X X X X Extracts X X X X
X X X X Extracts X X X X
....is denied. The procedure of assessment will be similar to DEPB imports. (iv) In respect of a manually assessed Bill of Entry, details of value and quantity will be debited in the system by the Appraiser at the time of assessing a B/E & a print of details of debit will be taken for records. 12.11 Printing of the Assessed B/E After assessment, the printout of assessed copy of the B/E will be taken by the Importer/Customs Broker from service center. The printout of B/E will contain duty-paying challan if duty is payable and statement of debit of licence for value/ qty and debit of Bond for duty foregone in respect of each item. The figures of these debits should be endorsed on the hard copy of the licence. 12.12 Examination/Out of Charge Procedure for goods registration, examination, out of charge and printing of B/E after out of charge will remain the same as mentioned above in Para 6. 13. Imports by 100% EOUs:- 13 .1 Registration of EOU All the 100% Export Oriented Units including STP / EHTP, etc. will be required to be registered as EOU in the System before filing of a Bill of Entry. The designated officer shall make data entry for registration of an EOU. Al....
X X X X Extracts X X X X
X X X X Extracts X X X X
....all be indicated. However, in the fields of "Additional information for claiming benefits under specified exemption schemes", in Col.(I) the prescribed Exim code for the relevant scheme related to imports like EOU/STP/EHTP would be required to be indicated. The Exim codes for the various schemes have already been notified in the Handbook of Procedures issued by the DGFT in column No 2.The relevant applicable exemption notification No........./Year..........with Sl. No. of item in the notifications is required to be indicated against the respective item. The data entry operator shall enter the code of EOU against the field Exim code ............after entry of Exim code enter notification no. /yr.& S. No. After completion of entry of all the items of the Bill of Entry, a check list will be printed. In the check list against an item, where EOU exemption is claimed, the words (EOU) & notification no. /year & S.No. will be printed at the end of the check list, details of Bond indicating the Bond no. Bond code, amount debited, Bank Guarantee debited or the details of certificate for central excise will be printed. (iv) The Importer / Customs Broker shall check the correctness of the d....
X X X X Extracts X X X X
X X X X Extracts X X X X
....e monitoring of the movement of the goods by monitoring the debits against the bond value/ CX certificate value through appropriate MIS reports. Under the present set up, the MIS reporting is not operational through EDI system and the same is being done manually by obtaining the re-warehousing certificate from Central Excise. (v) After completion of the assessment, the Bill of Entry shall be put to Bond queue for execution / debiting of Bond. Where any duty amount has been assessed, the duty shall be deposited in the bank as usual. Unless the Bond Officer completes the action of debiting Bond in the system, the B/E will not be available for registration for examination and out of charge. Procedure for registration of Bond / BG has been explained in para 21.2 of this Public Notice. 14. Availing Exemption under JOBBING Scheme Notification No.32/97-Cus dated 01.04.97, exempts goods imported for carrying out any job work and re-export subject to conditions specified in the said notification. Importers claiming the said exemption would be required to indicate the relevant Exim code and Notification in the columns "Additional information for claiming the benefit under the spe....
X X X X Extracts X X X X
X X X X Extracts X X X X
....t of charge of a Warehouse B/E, the system will create a ledger of quantity in respect of all the items included in Warehousing B/E. For the purpose of filing Ex-Bond B/E in the system, details of Customs Broker& the Importer will be entered as usual. In the field of Type of B/E 'X' will enable for entry of Ex-Bond B/E. A window will pop up for Warehouse B/E No. & date. On entry of Warehousing B/E No & date, the system will capture all the other details from the Warehousing Bill of Entry. Invoice S.No. as in the Warehousing B/E and against this invoice item S.No. and quantity will be entered. The system will proportionately determine the assessable value. All other details of item like the CTH, Customs Notification, CET, Excise Notification, etc., as in the Warehousing B/E will be displayed by the system. Tariff Headings and the Notifications can be changed if, so required. On completion of data entry, a check list will be generated by the system against the respective Job No. The importers should ensure that the details of invoice S.No, item S.No. and the quantity of the goods under ex-Bonding are correct. The check list, after corrections, will be returned to the service center o....
X X X X Extracts X X X X
X X X X Extracts X X X X
....apter IX of the Customs Act, 1962 have been paid; c) The rate of duty has not undergone any change after assessment and the out of charge. In case any change has taken place after assessment in the tariff or exemption structure having bearing on assessment, the B/E will be referred to the concerned Appraiser/Superintendent for re-confirming the correctness of the assessment. The Appraiser/Superintendent will re-assess the B/E, if so required. The system after re-assessment will generate duty challan for differential amount which will be printed at the service center and duty will be paid at the designated bank. (ii) After satisfying the requirements relating to clearance of the goods, the Superintendent will give out of charge on the system. After out of charge, the system will generate two copies of the Ex Bond B/E. One copy is for the importer and the other copy will be for the Bond Section. No exchange control copy will be generated for EX-Bond B/E. The system will also print along with B/E three copies of Order of Clearance (O/C). One copy of the O/C will be retained by the Bond Section, one copy will be retained by the officer controlling the Warehouse and the last copy ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....n provides for production of a certificate from the jurisdictional Central Excise authorities in terms of the Customs (Import of Goods at Concessional Rate of Duty for Manufacture of Excisable Goods) Rules, 1996, the same should also be registered in the system. For this purpose, the certificate obtained from the central excise office shall be produced to the Appraising Officer, before filing the B/E. The Appraiser/Superintendent shall register the same in the system in the same manner as the Bonds are registered. The system will generate the registration number. This registration number should be communicated to the importer and the original certificate shall be retained in the Assessing Group. Registration number shall be indicated at S. No. 18(c) in the Format for B/E data entry (ii) Against one B/E only one certificate should be used. The certificate shall be utilized against all such notifications requiring Central Excise certificate. At the time of assessment, the officer may verify the details of goods covered by the certificate and B/E on the basis of original certificate retained in the group. A print out of the statement of items assessed on the basis of certificate ca....
X X X X Extracts X X X X
X X X X Extracts X X X X
....case of goods of aforesaid Chapter, under certain sub-headings where the duty of Customs under the First Schedule to the Customs Tariff Act, 1975 is chargeable on the basis of value or weight in Kgs. or area in SQM of the textile fabrics covered under the said sub-headings and the duty chargeable will be the highest among the duties so determined on the basis of above mentioned three parameters. It is therefore, necessary to capture qty. in Kgs. and also the qty. in SQM in addition to the value of such goods. Provision has been made in the system to enter qty in Kgs. and qty in SQM in respect of above sub-headings. The system will calculate duty on value, on Kgs. & on SQM and will determine the highest among the three amounts. The highest amount will be taken for levy of duty. 40 B.1of Annexure C may be filled up accordingly. (ii) In case quantity of goods in the invoice is in Kgs. as declared in Table 'A' under 'Details of Description of Items', col. (3) in the table B1 of Annexure C should be left blank and indicate only qty in SQM in col. (4) above. Similarly, if the invoice qty. is SQM then indicate only qty. in Kgs. in col. (3) and col. (4) be left blank. (iii) However, ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....Date of Deposit (ii) The Bond detail shall be entered in the Bond Section. On entry, system will assign a job no. and check list is generated. The Importer / Customs Broker shall satisfy himself with the correctness of the details. The corrections, if any, shall be made and job shall be submitted. After submission, the job shall be forwarded to designated AC/DC to accept the Bond. The importer shall present the original Bond documents to the respective designated AC / DC for acceptance. (iii) The AC/DC shall observe all the instructions regarding acceptance of Bond issued by the Board / Commissionerate from time to time after satisfying that the documents submitted are in order & acceptable. The AC/DC shall retrieve the Bond details on screen by entering the job no., view the entries made in the system. If the information in the system match with the documents & conditions for acceptance of the Bonds are satisfied, the AC / DC may accept the Bond in the system. The AC/DC can also make corrections in the system if so required. After acceptance of the Bond by AC / DC, the Bond documents shall be taken by the Bond officer / Bond clerk. The Bond officer/ Bond clerk after receipt ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....of duty (wherever required), the importer is required to execute the Bond in respect of the Bill of Entry in question before goods registration in the Shed. If the Bond has not been executed against the Bill of Entry, the goods registration cannot be done. The Importer has to give a written request to AC/DC for debiting the Bond against a B/E. The importer shall specify the Bond Registration No., B/E No. and Date. The AC (Bond) has to retrieve the Bond and debit the Bond and BG. AC/DC Bond has the option to view the B/E. Before debiting, the system will pose the query "Whether the language of the Bond meets the legal requirement of the assessment of the B/E". If the amount to be debited is more than the credit balance in the Bond and BG Ledgers, the system will not allow debit and the AC/DC has to raise a query to the Importer for filing fresh Bond/BG. The system will not allow goods registration and out of charge, if the debit entries not made against the B/E in the Bond and BG Ledgers. Bond re-credits AC/DC has the option to re-credit value after finalization of assessment. Following entries will be made in the Bond and BG ledgers; -Date of credit -B/E No. and D....
X X X X Extracts X X X X
X X X X Extracts X X X X
....as has been explained in respect of 100% EOU. The processing of warehousing Bill of Entry shall continue to be as at present in the respective groups on first come first serve basis. (b) The system at the time of assessment of a Warehousing B/E shall display before the Appraiser, the requirement of Bond equal to double the amount of duty payable. The appraiser at the time of the assessment can change the Bond/BG amounts. Where the Bond details have been entered at the time of data entry, the same shall be displayed by the system & debit details will be printed on the Bill of Entry. Where Bond has not been debited at the time of data entry of B/E, Bond requirement shall be on the Bill of Entry. (c) The Bond shall be registered with the designated Bond Officer and debited in respect of a B/E. Unless the Bond is debited in the system, Bill of Entry cannot be registered for examination & out of charge at the shed / docks. (viii) Provisional Assessments (a) Where an item of the Bill of Entry is assessed provisionally by the Appraiser irrespective of the fact, whether EOU /Warehousing Bill of Entry, PD Bond will also be required in addition to the EOU / Warehousing Bond. T....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ther actually paid or payable) as a percentage of invoice value, the percentage rate should be indicated in the field "Rate". Where a fixed amount is paid or payable over the invoice value such amount should be indicated against the field 'amount' and shall be in Indian Rupees. The additional amount would get distributed proportionately amongst the various items in the invoice for determination of assessable value. In case goods relate to more than one invoices, the High Seas sales charges should be indicated against each invoice, proportionate to the value of goods in the invoice. The system shall add these charges to the CIF value of the goods for computation of assessable value for the purpose of levy of duty. (iii) The data entry operator at the Service Center shall enter these details in the relevant field in the system. These details will be printed on the check list. The IEC & the name of the seller of the goods shall also be printed at the end of the check list for verification by the Importer / Customs Broker. (iv) After submission, the B/E shall be processed under the EDI-System as a normal B/E. The Appraiser, Auditor, AC/DC at the time of processing the B/E will be....
X X X X Extracts X X X X
X X X X Extracts X X X X
....nt need not be declared since the system would apply the said reduction with reference to the Central Excise Tariff Heading. Details of such items for which Retail Sale Price has been declared may be carefully verified by the Importers/Customs Brokers before handing over the check list to the Service Centre Operator for submission of the Bill of Entry. It may also be ensured that all the articles covered in the invoice are carefully checked and Retail Sale Price declared in respect of all such articles, which require declaration of Retail Sale Price. Provision has also been made for amendment of declared Retail Sale Price at different stages subject to appropriate approvals wherever required. 24. Assessment of Special Valuation Branch Bills of Entry through EDI 24.1 The assessment of provisional SVB Cases shall be carried out in the EDI system. The following steps need to be followed carefully: a. In provisional SVB cases, the Bills of Entry shall be submitted in EDI System and not manually. b. In Rule 10 Valuation Declaration, against Sr.No.24, a remark should be given as 'PROVISIONAL' by the importer to ensure that correct and complete declaration has been filed by th....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ubmission of the documents/information by the importers, for any SVB inquiry the immediate recourse to the appropriate provisions of the Customs Act will be taken by Commissioner for obtaining the documents and dispense the EDD accordingly. 25. Anti-Dumping Duty (i) Notification Directory A directory of the notifications issued by the Central Government notifying the rates of anti-dumping duty has been created in the system. Notifications issued do not have a defined structure; therefore, these notifications have been re-structured in tabulated form providing a unique Serial No. of an item and a unique Serial No of producer/exporter of goods from a specified country. Due to re-structuring of the notifications into a defined format, the Serial No. at which the goods/country/producer/exporter is appearing in the notification of the Ministry may differ in the notification directory. Therefore, the directory may be carefully studied to identify the correct Serial No. of the item and producer/export for applying the relevant rate of duty. The notification directory is available at 'www.cbec.gov.in' and 'www.icegate.gov.in' websites. The directory can be downloaded from the said....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ed to declare the Tariff value notification number and S.No. of item in the notification applicable to the goods in question. For the purpose of data entry in the system, the details of Tariff Value should be indicated in Column (3) of the Table 39B (Classification Details) of Appendix-A the Format for Declaration at Service Centre for Data Entry. The extract of the Table is indicated below. 39B. Classification Details (1) Invoice Serial Number (2) Actual Invoice Number (3) Classification Details Item No. RITC 8 digit CTH A Notfn IS No PS No QTY T Notifn No IS No Qty Exemp. Notf Yr. Sl No. CTH Notfn Sl No 1 2 3 4 5 6 7 8 9 10 11 12 13 Abbreviations in Col. (3) above refer as under. T Notn. = Tariff Value notification number/year I S No. = S.No. in the notification QTY = Qty in the unit of measurement on the basis of which Tariff value fixed. 27 Assessment of Bill of Entry The tariff value is itself the assessable value, therefore, invoice value will be ignored by the system and the duty would be calculated on the basis of tariff value. If the Tariff value is in any ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ward Schemes PROCEDURE 3. The procedure to be followed in respect of filing of Shipping Bills under the Indian Customs EDI System 1.5 at Redi Port shall be as follows: - Under the EDI System, the Shipping Bills shall be filed electronically and processed online in an automated environment. Certain declarations and certificates, etc., that are required to be provided in hard copy should be attached with the export documents when the goods are presented for export. The following pre-requisites are to be complied with before filing shipping bills: 3.1 IE-Code of the exporters-Import Export (IE) Codes are being issued to the exporters by the DGFT, details of which are transmitted online to ICES on a daily basis. ICES automatically registers the IE Codes after confirming their validity, to enable the exporters to file the Shipping Bills electronically. Before filing the Shipping Bills, the exporters are advised to check from the DGFT, as to whether their IE Code has already been transmitted to ICES. If their IE Code has not been transmitted to ICES by the DGFT, they should first get the same transmitted from the DGFT, failing which the exporter shall not be able to file the ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....stoms officer to register the details of such bank account in the ICES 1.5. Annexure 'E' (Export) 3.6 Exchange Rates of un-notified currencies: The ICES 1.5 maintains exchange rates in respect of currencies the rates of which are notified by the Ministry of Finance on a monthly basis. However, in respect of currencies which are not covered in the notifications of the Ministry of Finance, the concerned bank's certificate indicating the exchange rate applicable for the date on which the Shipping Bill is filed should be produced to the customs officer and details of the same should be entered in the ICES 1.5 while filing the Shipping Bill. The Shipping Bill should be submitted in the system on the same date for which the rate of exchange is certified. 3.7 Exim Scheme Codes: The DGFT has notified Exim Scheme Codes in respect of various schemes, the list of which is appended with this Public Notice. An appropriate Code should be indicated against each item in the Shipping Bill. For example, if exports are under claim of Drawback, Code19 should be used. Appendix 3 3.8 Units of Measurement Codes: Against any quantity of goods, the appropriate Code indicated against the respective....
X X X X Extracts X X X X
X X X X Extracts X X X X
....G' (Export) 4. DATA ENTRY FOR SHIPPING BILLS 4.1 Shipping Bills can be filed through the service center located in Customs Division, Dapoli / Redi Port or through Remote EDI System if the Exporter or the Customs Broker has registered themselves at ICEGATE. In case the Shipping Bill is filed through Service Centre, the Exporters/Customs Brokers would be required to submit a filled up form (Annexure A) at the Service Centre with the following documents: i) A declaration of all particulars in the SB in the format placed at Annexure - 'A' (Export) ii) Copy of Invoice iii) SDF declaration at Annexure B (Export) iv) DES/EPCG declarations etc. as applicable Annexure 'D' (Export) 4.2 The formats should be duly complete in all respects and should be signed by the exporter or his authorized representative/Customs Broker. Forms, which are incomplete or unsigned, will not be accepted for data entry. Exporters/Customs Broker should ensure that the data provided by them and entered by service center is correct in all respects so that process of clearance of export is smooth. 4.3 Data entry of Shipping Bills would be done at the Service Centre on payment of charges. Variou....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ty to use Digital Signature Certificate for filing the aforementioned Customs process documents, the following process would be followed: (i) A web-based Common Signer utility is provided free of cost through the ICEGATE website (https://www.icegate.gov.in) for digitally signing the said Customs process documents. (ii) Exporters, customs brokers, shipping lines, and their agents are expected to use a Class III Digital Signature Certificate obtained from any of the Certifying Authorities, as notified by Controller of Certifying Authorities (http://www.cca.gov.in), following the due process. (iii) Exporters, customs brokers, shipping lines and their agents shall use the Digital Signature Certificate and the web based Common Signer utility to digitally sign the electronic documents generated by remote EDI package and then subsequently send the digitally signed documents for processing via email/web upload, as is being done currently. (iv) On receiving the digitally signed documents the ICEGATE server side verifier shall verify the user's credentials, validity of certificate, Certifying Authorities credentials, Public Key, Certificate Revocation List (CRL) status and th....
X X X X Extracts X X X X
X X X X Extracts X X X X
....hecking classification under the Drawback Schedule / DEEC / DFIA / EOU, etc. He may also give special instruction for examination of the goods. 7.4 If the S/B falls in the categories indicated in Paras 7.1 and 7.2 above, the exporter should check with the query counter at the Service Centre whether the S/B has been cleared by Assistant Commissioner/ Deputy Commissioner, before the goods are brought for examination. In case AC/DC raises any query, it should be replied through the Service Centre or through ICEGATE, for those Exporters/Customs Brokers who are registered with ICEGATE. After all the queries have been satisfactorily replied to, AC/DC will pass the S/B. 7.5 RMS Facilitation - First Phase: When the RMS facility is launched in this site, following would be the procedure. (i) Movement of Shipping Bills: All the Shipping Bills filed electronically in ICES will be perused and processed by RMS on submission and after every amendment (s). The output of RMS processing will be communicated to ICES. The RMS output will determine the movement/ routing of Shipping Bills in ICES. The Shipping Bill may be sent for Assessment and Examination, Assessment only or Examinatio....
X X X X Extracts X X X X
X X X X Extracts X X X X
....uld enter a detailed comment in the departmental comments and proceed to take decision as per law. The Risk Management System will also provide to the officers a category of instructions termed Compulsory Compliance Requirements (CCRs). This term refers to compliance requirements that have to be mandatorily fulfilled such as Minimum Export Price (MEP) and clearance from the Other Governmental Departments (OGDs) like Drug Control authorities, Inspection Agencies, Narcotics Commissioner and Ministry of Chemicals and Fertilizers etc. It may be noted that while all efforts have been made to make the RMS database containing these instructions as comprehensive as possible, certain requirements might have escaped notice. These are mandatory requirements under the Foreign Trade Policy (FTP) and other Allied Acts which must be fulfilled before allowing clearance. In case it comes to the notice of any officer that a specific requirement is not listed, then he shall communicate the same immediately to the local Risk Manager, who in turn will inform the Risk Management Division (RMD) team, for necessary updating of database. When a SB comes for assessment, the Appraising Officer after....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ensuring that the compulsory compliance requirements (CCRs) mentioned in the RMS instructions are duly complied with. Whenever the Officers examining the cargo feel that the CCRs figuring on their screen are not applicable to any specific SB/ item, they must enter a departmental comment in the SB in the EDI specifying the reasons thereof before giving clearance. It is also clarified that officers in the shed may examine a consignment even if it is facilitated and directly selected for LEO by the RMS, if they have a valid reason for doing so. However, such examination should be done only after prior approval of the Commissioner or an officer authorised by him for this purpose, who shall not be below the rank of Additional/Joint Commissioner of Customs and after recording the reasons for the same. A brief remark on the reasons and particulars of Commissioner's authorization shall be made by the officer examining the goods in the departmental comments in the EDI system. (vi) Let Export Order (LEO): Even though in many cases the RMS decides to give appraisal and examination waiver, the LEO function would not be dispensed with and customs clearance in terms of Section 51 of the....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... configuration, capacity, denier etc. which may have a direct bearing on valuation, classification or claim of benefits under export promotion schemes. They shall make sure that all mandatory fields in the SB are properly filled. While discharging their functions, they would be required to follow all the existing instructions /Standing Orders on the subject. In this regard, attention is invited to Standing Order No. 18/2013 dated 13.12.2013 and Public Notice No. 42/2013 dated 13.12.2013 issued by this office. The instructions contained therein are required to be followed scrupulously. Additional information, wherever required may be sought from the exporters. However, frivolous and piece-meal queries should be avoided and the query should be detailed and covering all aspects. The Additional/Joint Commissioners in-charge of Export shall monitor the queries closely. (viii) Recall of facilitated Shipping Bills: Recall of SB and subsequent reassessment of the facilitated Shipping Bills (where no assessment and no examination are prescribed by the RMS), contrary to RMS instructions, should be avoided as a matter of routine. However, under extraordinary circumstances or on the requ....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... Officers have the discretion of examining any or all the packages/goods. 8.3 The Examining Officer may inspect and/or examine the shipment, as per instructions contained in the checklist and enter the examination report in the system. There will be no written examination report. He will then mark the Electronic S/B and forward the checklist along with the original documents to the Appraiser / Supdt. in charge. If the Appraiser/Supdt. is satisfied that the particulars entered in the system conform to the description given in the original documents and the physical examination, he will proceed to give "Let Export" order for the shipment and inform the exporter. The Appraiser / Supdt. would retain the checklist, the declaration and all original documents with him. 8.4 In case of any variation between the declaration in S/B and the documents or physical examination report, the Appraiser / Supdt. will mark the electronic S/B to AC/DC Exports. He will also forward the documents to AC / DC and advise the exporters to meet the AC / DC for further action regarding the discrepancy. In case the Exporter agrees with the views of the Department, the S/B would be processed finally. Where ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....mination Officer as well as exporter / representative of the Customs Broker (Name and ID Card number of the representative of the Customs Broker should be clearly mentioned below his signature). 10.2 Any other certificates required for permitting export will be retained by Customs along with the Shipping Bills. 11. PAYMENT OF MERCHANT OVERTIME (MOT) 11.1 The present manual system for payment of Merchant Overtime (MOT) charges will continue. 11.2 MOT charges will be required to be paid by exporter when the goods are examined by Customs for allowing "Let Export" beyond the normal office hours. No charges would be required to be paid on normal working days when the examination itself is being done for "Let Export" up to 05.00 P.M. However, if the goods are examined at the request of exporter outside the Customs area, a fee as prescribed in Customs (Fees for Rendering Services by Customs Officers) Regulations, 1998, shall be charged by the jurisdictional Customs Authorities under whose jurisdiction examination has been carried out irrespective of the fact whether the examination/sealing of container is within working hours or outside working hours. 12 DRAWAL OF SAMPLES ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....be made at the Service Centre provided the system has not generated the S/B number. Where corrections are required to be made after the generation of the S/B No. or, after the goods have been brought in the docks/CFS, amendments will be carried out in the following manner. 1. If the goods have not yet been allowed "Let Export", Assistant Commissioner/Deputy Commissioner may allow the amendment. 2. Where the "Let Export" order has been given, the Additional/Joint Commissioner (Exports) would allow the amendments. 14.2 In both the cases, after the permission for amendments has been granted, the Assistant Commissioner (Exports) will approve the amendments on the system. Where the print out of the S/B has already been generated, the exporter will surrender all copies of the Shipping Bill to the Appraiser for cancellation before amendment is approved in the system. 15. SHORT SHIPMENTS, SHUT OUT, CANCELLATION AND BACK TO TOWN PERMISSIONS 15.1 AC/DC(Export) will give permission for issue of short shipment certificate, shut out or cancellation of S/B, on the basis of an application made by the exporter. The S/B particulars would need to be cancelled / modified in the system ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....t would not be possible to accept any shipment for export under claim for Drawback in case the account number of the exporter is not indicated in the declaration form. 20.3 The exporters are also required to give their account number along with the details of the Authorized Dealer bank through which the export proceeds are to be realized. 20.4 As indicated earlier Export declarations involving a drawback amount of more than Rupees One lakh will be processed on the system by the AC/DC before the goods can be brought for examination and for allowing "Let Export". 20.5 The drawback claims are sanctioned subject to the provisions of the Customs Act 1962, the Customs and Central Excise Duties Drawback Rules 1995 and conditions prescribed under different sub-headings of the All Industry rates as per notified by the Ministry of Finance from time to time. 20.6 After actual export of the goods, the drawback claims will be processed in the EDI system by the officers of Drawback Branch on "First Come First Served" basis. There is no need for filing separate drawback claim. The claims will be processed based on the Truck/Train Summary. The status of the Shipping Bill and sanction o....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ce a certificate from the bank branch, where he operates his bank account, certifying the correctness of the IFS code and bank account number of the exporter and a copy of the same shall also be submitted to the authorized bank branch at the EDI location. c) Whenever there is a change in the exporter's bank account number the same procedure is required to be followed by the exporter for fresh registration of new bank account number. d) State Bank of India, Treasury Branch, Pune (BSR Code - 0001904) is authorized for disbursement of drawback amount online. 20.9 Supplementary Drawback Claims: If the drawback amount initially paid is less then entitlement the exporter can file application for supplementary claim for additional amount. For such claims after approval of sanction of supplementary claim on file by the AC/DC Drawback, the Appraiser / Supdt. (DBK) shall process claim online and submit it for approval by AC/DC (DBK). After sanction of drawback against supplementary claim, Drawback Scroll shall be generated by system and amount transferred to the bank in the same manner as normal in scroll. 20.10 Procedure for export under claim for brand rate under Rule 7 of Draw....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ils of the eligibility for the rate and cap specified in 'A' column of AIR Schedule in terms of all the Notes and Conditions with the Schedule and on this basis the Customs shall update the record and after taking into account the payments already made, finalise the claim in terms of the AIR provisions. (v) It may be noted that only the first drawback amount processed through the EDI system is electronically validated with respect to Rule 8A of Drawback Rules, 1995. Therefore, wherever there is any subsequent EDI processing on basis of the AIR, this validation must be enforced by the Customs officer for the total drawback amount against relevant tariff item. (vi) For shipping bills filed before 23.11.2015, the exporters opting for claim of brand rate under rule 7 of the Drawback Rules, 1995 would, as before, have declared the figure "9801" as an identifier in the shipping bill under the Drawback details. In such cases, if the Let Export Order date is to be on or after 23.11.2015, the exporter shall be facilitated to amend, prior to the actual LEO, the identifier along the lines mentioned in item 2 above. However, even if the LEO occurs on or after 23.11.2015 without such amen....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ove mentioned DGFT and Customs notifications are effective from 1st September 2016. The CBEC's Systems Directorate is making all the necessary EDI related arrangements for implementation including specifying the appropriate new scheme code that would need to be declared by exporters making exports under the Special Advance Authorization Scheme cum AIR Drawback and these shall be publicized to exporters in advance by the Systems Directorate. 21. EXPORT OF GOODS UNDER 100% EOU SCHEME 21.1 The Exporters can get the export goods examined by Central Excise / Customs Officer at the factory even prior to filling of Shipping Bill. Self-sealing facility is also available. He shall obtain the Examination report in the form annexed as Annexure'C1'to this Public Notice duly signed and stamped by the Examining Officer and Supervising Officer at the factory. The export invoice shall also be signed and stamped by both the officers at the factory. Thereafter the goods shall be brought to the concerned Customs Warehouse for the purpose of clearance and subsequent "Let Export". The Exporters / Customs Broker shall present the goods for registration along with Examination Report in Annexure ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....enses, exporters would be required to quote the relevant license number on the export documents. 22.2 There is no need of registration of file number / license number and obtaining a Customs Registration number at this port. As the licenses issued under DES / EPCG will now be received online from DGFT and would be available at this port, Importers would be required to produce the hard copies of the licenses issued by DGFT along with bonds / LUTs and execute BG in accordance with the provisions of the Customs Circular(s) in force and as per the statutory requirements of the relevant Customs Notifications, to the designated officer, at this port as this port is the port of registration in the licenses, for raising debits in bonds / LUTs and monitoring such bonds / LUTs. Importers are required to quote the license number on the respective Import documents in case they intend to use the licenses. No manual debits would be made in hard copies of licenses at the time of assessment of Bills of Entry for imported cargo. 22.3. For monitoring of export obligation under licenses issued by DGFT under above mentioned schemes, Customs would transmit online all such Shipping Bills to DGFT w....
X X X X Extracts X X X X
X X X X Extracts X X X X
....been processed and accepted, the goods can be presented at the Export Shed along with EPCG/DES licences for examination and "Let Export" as in other export goods. All exporters availing of the EPCG/DES facilities are requested to immediately get their EPCG/DES registered in the EDI System so that the export declarations are processed expeditiously. 22.8 Further, exporters availing of EPCG/DES benefits in terms of various notifications should file the relevant declarations in Annexure D (Export) along with Annexure A (Export). 22.9 It is further clarified as follows: - a. While giving details relating to EPCG/DES operations in the form at Annex-D, the exporters/CHAs should indicate the S. No. of the goods being exported in the Column titled "ITEM S.NO. IN EPCG/DES PART E" of Annex. D (Export). b. If inputs mentioned in EPCG/DES only have been used in the manufacture of the goods under export, in Column titled "ITEM SR.NO. in Advance Authorization of Annex. D (Export), the exporters/CHAs are required to give S.No. of inputs in Part-C of the DES Book and Exporters need not fill up column titled "DESCRIPTION OF RAW MATERIALS". c. If some inputs which are not in Part-C of....
X X X X Extracts X X X X
X X X X Extracts X X X X
....tioned Circular) along with a declaration of eligibility for the rate and rebate. OPTING FOR ROSL SCHEME: The claim cum declaration of eligibility has to be made by the exporter by using specified scheme codes for drawback exports, at the item level. The options in permutation with the ROSL Scheme are being provided with separate scheme-codes as listed below: Scheme Code Description 60 Drawback and ROSL 61 EPCG, Drawback and ROSL 64 Drawback, Spl AA ( 4.04A) and ROSL 65 EPCG, Drawback, Spl AA(4.04A) and ROSL For EDI shipping bill, selection of the scheme-code involving ROSL scheme at the time of export shall itself amount to making claim cum declaration of eligibility. For EDI shipping bill this shall be the only means to make the claim. Any other means of claim shall not be accepted. Shipping Bills which are filed prior to 20-09-2016 but for which LEO is given on or after 20-09-2016 are also eligible for RoSL. Such Shipping Bills which have not claimed the scheme code as listed above, may need to be amended before LEO to avail this benefit. In the absence of proper scheme codes, the ROSL benefit would not be available. ROSL Re....
X X X X Extracts X X X X
X X X X Extracts X X X X
..... The Custodian should transmit the Truck/Train Summary of the containers moved out of ICD to gateway port. The final EGM shall be filed by Shipping lines at the gateway port. 27. Monitoring of foreign exchange realization: a. The exporters filing Shipping Bills (S/Bs) under drawback shall furnish a declaration to the Assistant Commissioner/Deputy Commissioner (Drawback) providing the details of all Authorized Dealers (AD), their codes and addresses through which they intend to realize the export proceeds. Such a declaration shall be filed at each port of export through which the exporter exports his goods. In case, there is a new addition of AD, the same is to be intimated to the concerned Custom House at the port of Export. b. The system would generate on all Shipping Bills, the due date for submission of BRCs. c. The exporter shall submit a certificate from the Authorized Dealer(s) in respect of whom declaration has been filed containing details of the shipments which remain outstanding beyond the prescribed time limit, including the extended time, if any, allowed by AD/RBI. Such a certificate can also be provided by a Chartered accountant in his capacity as a statut....
X X X X Extracts X X X X
X X X X Extracts X X X X
....d (and implication foreign exchange has been realized for all other S/Bs) then, the officer will choose option (3). This will allow the officer to enter the S/Bs for which the BRCs are pending. Thereafter, all S/Bs except such pending S/Bs will be deleted from the list. k. The BRC entry module also enables the Department to remove the list of S/Bs from the pendency list if drawback is recovered subsequently. In such cases, the officer may choose option (1) and enter the order no./challan no. and date and also the no. and date of all shipping Bills for which the drawback has been realized. Thereafter, all such S/Bs will be deleted from the pendency list. 28. The system will indicate to the Assistant Commissioner/Deputy Commissioner (Drawback) all cases of Drawback Shipping Bills if the BRC/negative statement in the prescribed Annexure enclosed to the Board's Circular is not submitted by the exporter within the prescribed period. 29. Service tax refund One of pre-requisites for claiming S.T refund electronically through ICES 1.5 is that the exporters should have a bank account and also central excise registration number or service tax code number (including service tax re....
X X X X Extracts X X X X
X X X X Extracts X X X X
....he designated customs officer having 'CLK' role. ICES 1.5 will verify these details with the details available from ACES. A checklist shall be printed and the exporter/his authorized representation should check its correctness and return to customs officer after signing etc. Then the details will be saved in Systems. This is one time registration and mandatory for all exporters claiming S.T Refund. ICES 1.5 will not accept shipping Bills with claim of STR if these details are not registered. Option is available with the CLK Role to modify/amend the bank account details and central excise registration number/service tax code number. It may be noted that registration of bank account and central excise registration number/service tax code number has to be done at each customs location separately. While capturing central excise registration certificate or service tax code number in ICES 1.5, the system will validate the details with details available from Automation of central Excise and service tax (ACES) and only on successful validation, data will be saved in ICES 1.5. It may be added that either central excise registration certificate or PAN based service tax code no. (Includ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....lpdesk is managed by TCS. Regarding hardware issues the users may contact 18004254994 or mail to [email protected] this is managed by the HP. (a) Users may also directly contact the system Manager or the designated Customs Officers in case of any difficulty. Notwithstanding anything herein mentioned above, at present only Export of Iron Ore will be allowed and the actual date of commencement of ICES 1.5 (EDI) system at Redi port will be notified shortly. Sd/- (M. V. S. CHOUDARY) COMMISSIONER CUSTOMS, PUNE ============= Document 1 APPENDIX-1 EDI Locations for Customs broker Registration S. POL SECTION LOCODE SITE ADDRESS No 1 BANGALORE AIR CARGO - INBLR4 INWFD6 INBLR4 2 CUSTOM INBNG6 HOUSE, MUMBAI - INBOM1 ACC BANGALORE BENGALURU INTERNATIONAL AIRPORT ICD WHITEFIELD PLANTATIONS, HOSKOTE, BANGALORE 3 INBOM1 INBOM4 INBSL6 INCCH6 INDIG6 INDPC4 INJNR4 INJNR6 INMUL6 INMWA6 INNSA1 INNSK6 INPMP6 INTLG6 INWAL6 CUSTOM INAMG6 HOUSE INCCU1 KOLKATTA - INCCU4 INCCU1 INDUR6 INPTPB 4 CUSTOM HOUSE, COCHIN - INCOK1 INCCJ4 INCOK....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ION, PANIPAT ICD PATPARGANJ, GAZIPUR, NR GAZIPUR BUS DEPOT, ND ICD PATLI, GURGAON, HARYANA ICD, PALWAL, HARYANA INREA6 INSTT6 ICD REWARI, REWARI HARYANA Star Track Terminal Pvt Ltd ICD Dadri INTKD6 INTTP6 INHDD6 ICD TUGHLAKABAD, NEW DELHI 110020 TTP Dadri ICD PANTNAGAR, UTTARAKAND 6 AIR CARGO, INHYD4 HYDERABAD - INHYD4 INSNF6 INTMX6 INDORE - ININD6 INBOK6 INCHJ6 INDHA6 INIDR4 ININD6 INMDD6 INNGB6 INNGP6 INRAI6 INRTM6 INPRK6 KANDLA INIXY1 INIXY1 ACC SHAMSHABAD AIRPORT DIST RANGA REDDY HYDERABAD ICD SANATHNAGAR, HYDERABAD, 500018 ICD THIMMAPUR, 11-60/5-7, THIMMAPUR, 509325, AP ICD BORKHEDI, NAGPUR DIST, MAHARASHTRA BHUGAON LINK ROAD, WARDHA, MAHARASHTRA M/S PEGASUS ICD, VILL-DHANNAD, INDORE,MP-453001 ACC DEVI AHILYABHAI HOLKAR AIRPORT INDORE MP ICD 113 CONCOR COMPLEX SECTOR III PITHAMPUR DHAR ICD MADIDEEP 34-A1 NIA DIST: RAISEN MP 462046 MIDC IND.AREA, BUTIBORI, NAGPUR, MH 441122 ICD NAGPUR NR NARENDRA NAGAR NAGPUR 440027 ICD RAIPUR NEAR GOODS-SHED KAPA RAIPUR 492009 CONCOR ICD,NR LOCO SHED, JAORA RD., RATLAM(MP)457001 ICD POWARKHEDA....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... TIRUPUR ICD TIRUPUR RAAKIYAPALAYAM AVINASHI TIRUPUR 54 M/S CONCOR, ENNORE HIGH ROAD, TIRUVOTTIYUR, CHENNAI GOA AIR CARGO COMPLEX, SADA COMPLEX, MARMAGOA NEW CUSTOM HOUSE MARMAGOA, GOA PIN-403803 INMRM1 13 MUNDRA - INMUN1 INMUN1 MUNDRA SEZ PORT, MUNDRA, GUJARAT 14 NEW CUSTOM HOUSE, INHAS6 INNML1 ICD HASSAN, KARNATAKA NEW CUSTOM HOUSE, PANAMBUR, MANGALORE 575010 MANGALORE - INNML1 ICD ANKLESHWAR OPP ONGC TNSHIP OLD NH8 ANKLESHWAR ACC AHMEDABAD OLD AIRPORT, SAHIBAUG AHMEDABAD 12 BEDI PORT JAMNAGAR GUJRAT ICD DASRATH VADODARA GUJARAT - 391740 15 RAXAUL LCS - INJBNB LCS JOGBANI, DIST: ARARIA, BIHAR INRXLB INRXLB LCS RAXAUL, DIST: EAST CHAPARAN, BIHAR 16 AHMEDABAD INSBI6 INAKV6 INAMD4 INBED1 INBRC6 INDAH1 INHIR6 INHZA1 INKBC6 INMDA1 INPAV1 INSAC6 INSAU6 DAHEJ PORT CUSTOM HOUSE DIST: BAROACH GUJARAT SURAT HIRA BOURSE, KATARGAM, SURAT, GUJRAT HAZIRA PORT, CHORYASHI, BYPASS RD., HAZIRA, SURAT KRIBHCO INFSTR LTD,HAZIRA, KRIBHCO NGR,SURAT, GUJRAT MAGDALLA PORT URMI COMPLEX SANGRAMPURA SURAT CUSTOM HOUSE, GPPL PIPAVAV RAJULA, AMRELI GUJARAT SURAT D....
X X X X Extracts X X X X
X X X X Extracts X X X X
....Numbers Local Office Address City PIN State Email id Telephone Numbers Details of the partners/Directors/Proprietors/Any other Authorized person (For each person following information is to be provided) PAN (If available) Name of the person Designation Address City PIN State Email id Telephone Numbers Date: Place: APPENDIX-4 Currency Codes CURR_CD CURR_DESC 5 Signature of the applicant CNTRY_CD AFA AFGAHANI AF ALL ALBANIAN LEK AL ᎠáƒáŽ ALGERIAN DINAR ᎠრADP ANDORAN PESTA AD AON ANGOLAN NEW KWANZA AO XCD EAST CARRIBEAN DOLLAR AI ARS ARGENTINE PESOS AR AMD ARMENIAN DRAM AM AWG ARUBAN GUILDER AW AUD AUSTRALIAN DOLLAR AU ATS AUSTRIAN SCHILLING AT AZM AZERBAIJAN MANAT AZ BSD BAHAMIAN DOLLAR BS BHD BAHRAINI DINAR BH BDT BANGLADESH TAKA BD BBD BARBADOS DOLLAR BB BYB BELARUSSIAN RUBLE BY BEF BELGIAN FRANC BE BZD BELIZE DOLLAR BZ XOF CFA FRANC BJ BMD BERMUDIAN DOLLAR BM BTN BHUTAN NGULTRUM BT BOB ....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... MACAU PATACA MO MKD MACEDONIAN DENAR MK MGF MALAGASSY FRANC MG MWK MALAWIAN KWACHA MW MYR MALAYSIAN RINGGIT MY MVR MALDIVE RUFIYAA MV MTL MALTESE LIRA MT MRO MAURITANIAN OUGUIYA MR MUR MAURITIUS RUPEE MU MXN MEXICAN PESO MX MDL MOLDOVAN LEU MD MNT MONGOLIAN TUGRIK MN MAD MORACCAN DIRHAM MA MZM MOZAMBIQUE METICAL MZ NMK KYAT MM NAD NAMIBIA DOLLAR ÎΑ NPR NEPALESE RUPEE NP NLG NETHERLANDS GUILDER NL NETHERLAND ANTILLIAN ANG GUILDER AN NICARAGUAN CORDOBA NIO ORO NI NGN NIGERIAN NAIRA NG OMR RIAL OMANIS OM PKR PAKISTANI RUPEE PK PAB PANAMAN BALBOA PA PGK KINA PG PYG PARAGUAY GUARANI PY PEN PERUVIAN NUEVO SOL PE PHP PHILLIPINES PESOS PH PLN POLISH ZLOTY PL PTE PORTUGUESE ESCUDO PT QAR QATARI RIAL QA ROL ROMANIAN LEU RO RUR ROUBLE RU RWF RWANDA FRANC RW SHP ST. HELENA POUND SH WST TALA WS STD DOBRA ST SAR SAUDI RIYAL SA SCR SEYCHELLES ....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... APPENDIX-6 Country Codes CNTRY CODE CNTRY NAME AD ANDORRA AE UNITED ARAB EMIRATES AF AFGHANISTAN AG ANTIGUA ΑΙ ANGUILLA AL ALBANIA AM ARMENIA AN NETHERLANDS ANTILLES AO ANGOLA AQ ANTARTICA AR ARGENTINA AS AMERICAN SAMOA AT AUSTRIA AU AUSTRALIA AW ARUBA AZ AZARBAIJAN 10 10 BA BB BD BOSNIA & HERZEGOVINA BARBADOS BANGLADESH BE BELGIUM BF BURKINA FASO BG BULGARIA BH BAHRAIN BI BURUNDI BJ BENIN BM BERMUDA BN BRUNEI BO BOLIVIA BR BRAZIL BS BAHAMAS BT BHUTAN BV BOUVET ISLAND BW BOTSWANA BY BELARUS á´áƒ BELIZE CA CANADA CC CF CG CH CI COCOS (KEELING ISLANDS) CENTRAL AFRICAN REPULIC CONGO SWITZERLAND COTE D IVOIRE CK COOK ISLANDS CL CHILE CM CAMEROON CN CHINA CO COLOMBIA CR COSTA RICA CU CUBA CV CAPE VERDE ISLANDS CX CHRISTMAS ISLANDS CY CYPRUS CZ CZECH REPUBLIC DE GERMANY DJ DJIBOUTI DK DENMARK DM DOMINICA DO DOMINICAN....
X X X X Extracts X X X X
X X X X Extracts X X X X
....PARAGUAY QA QATAR RE REUNION RO ROMANIA RU RUSSIA RW RWANDA SA SB SC SAUDI ARABIA SOLOMON ISLANDS SEYCHELLES SD SUDAN SE SG SH SI SJ SK SL SWEDEN SINGAPORE ST HELENA & ASCENSION ISLAND SLOVENIA SVALBARD AND JAM MAYEN ISLANDS SLOVAK REPUBLIC SIERRA LEONA SM SAN MARINO SN SENEGAL SO SR ST SV SY SZ TC TD TF TG TH TJ SOMAALIA SURINAM SAO TOME AND PRINCIPE EL SALVADOR SYRIA SWAZILAND TURKS & CAICOS ISLANDS CHAD FRENCH SOUTH & ANTARTIC TERR TOGO THAILAND TAJIKISTAN TK TOKELAU ISLAND TM TURKMENISTAN TN TUNISIA ΤΟ TONGA TP EAST TIMOR TR TURKEY TT TRINIDAD & TOBAGO TV TUVALU TW TAIWAN ᎢრTANZANIA UA UKRAINE UG UGANDA UNITED STATES MINOR OUTLAYING UM ISLANDS US UNITED STATES UY URUGAY UZ UZBEKISTAN 14 VA VC VE VG VI VN VU VATICAN CITY STATE(HOLY SEE) ST VINCENT VENEZUELA BRITISH VIRGIN ISLANDS US VIRGIN ISLANDS VIETNAM, DEMOCRATIC REP. OF VANUATU WF ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....4.04A) and Rebate of State Levis EPCG,Drawback And DEEC EPCG,DRAWBACK And Jobbing EPCG Drawback And Diamond Imprest Licence EPCG Drawback And DEPB Post Export 76 EPCG Drawback And Depb (Pre-export) 79 80 81 EPCG,Drawback and DFIA EPCG,Drawback and Advance Licence for annual requirement DFIA and Drawback 98 Free Shipping Bill involving Indian Currency 199 NFEI The list of scheme code is available at ICEGATE website at: https://www.icegate.gov.in/Webappl/scheme_det.jsp ANNEXURES ANNEXURE - 'A' LICENCE DATA ENTRY FORM LICENCE MASTER DETAILS EXIM SCHEME CODE DGFT FILE NO. IN LICENCE EXEMPN NOTFN. NO. BASIS (QV-QTY/VALUE) (FOR ADVANCE LICENCE) 16 16 DEEC NO DATE ISSUED BY (DGFT CODE) TRANSFERABLE (Y/N) PORT OF REGISTRATION LICENCE NO & DATE RECEIPT NO (IF EXPORT'S PRIOR TO ISSUE OF LIC. LICENCE EXPIRY IMPORT END DATE DATE EXPORT END DATE LICENCE EXTENDED Y/N LIC EXTEND DATE IE - CODE IE BRANCH CODE EXPORTER TYPE TOTAL FOB OF EXPORTS IN FOREIGN RUPEES TOTAL FOB OF EXPORTS IN FOREIGN CURRENCY F.C. CODE TOTAL CIF IN RUPEES TOTAL CIF ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....gh Sea Sale (HSS) (D) If yes, high sea seller particulars- (a) Importer - Exporter Code(IEC) : (b) Branch Serial Number (c) Name of the high sea seller (d) Address : Yes/No Section 46 (1) Proviso Case : Yes/No If Yes, reasons 6. Special requests, if any (A) First Check requested : Yes/No (B) Green Channel facility for clearance without examination requested : Yes/No (C) Urgent clearance requested against temporary documentation (Kachcha B/E): Yes/No (D) Extension of time limit requested under Section 48 : Yes/No If yes, reasons for late filing of BE : 7. Port of Shipment 8. Country of Origin 19 (If same for all goods of the consignment, otherwise declare at the item level at S.No.39) 9. Country of Consignment IGM Details: 10. 11. Whether it is Transhipment Cargo (to Sea or ICD): Yes/No Additional information for Transshipment Cargo (at Sea and ICDs) 12. 13. 14. Name of the gateway port Gateway IGM Number (c) Date of entry inwards at gateway port: (a) Import General Manifest (IGM) No./Year (b) Date of entry inward (a) Master Airway Bill (MAW....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ale 31. Method of valuation applicable 32. (a) Invoice value (b) Currency: 33. Terms of invoice (Tick) : (a) FOB (b) CIF (c) CI (d) CF 34. 44 Freight, Insurance and other charges: --(a) Freight (b) Insurance (c) Loading, unloading and handling charges[ Rule 9(2)(b)] (d) Other charges related to the carriage of goods (e.g. daughter Rate (%) OR Amount Currency : 1% 35. vessel expenses, transit/ transshipment charges etc) : Cost and services not included in the invoice value and other miscellaneous charges : (a) Brokerage and commissions (b) Cost of containers 22 Rate (%) OR Amount Currency 36. (c) Cost of Packing (d) Dismantling, transport and handling charges at the country of export or any other country (e) Cost of goods and services supplied by buyer (f) Documentation (g) Country of Origin Certificate (h) Royalties and licence fees (i) Value of proceeds which accrue to seller : (j) Cost of warranty services, if any, provided by the seller or on behalf : of the seller (k) Other costs or payments, if any, to satisfy the obligation of the sel....
X X X X Extracts X X X X
X X X X Extracts X X X X
...../ Prov (P)/ Final (F) Value 26 27 28 29 30 31 24 Import Licence Details Exim scheme code, if any Import against licence Y/N 32 33 Para No./ Year of Exim Policy 34 B.1 Details of Quantity where duty rates on unit of measurement different than in the Invoice: (1) Invoice Serial Number: (2) Actual Invoice Number Item CTH QTY in KGS QTY in SQM No. (1) (2) (3) (4) C. In case of re-import, Shipping Bill Details: (1) Invoice Serial Number (2) Actual Invoice Number Item Invoice No. Item Sl. No Shipping In Bill No. Shipping Bill date Port of Export of Shipping Sl.No. in Shipping Invoice Bill Bill 1 2 3 4 5 6 Notification No./ Notification Payments made for export on Pro-rata basis (In Rs.) Calculated Customs Duty Calculated Excise Duty Sl.No Freight Insurance 7 8 9 10 11 D. Details relating to duty Exemption based on Exim Schemes and License particulars.: (1) Invoice Serial Number (2) Actual Invoice Number Addl. Item Sl.No in Invoic ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ani or other indigenous systems of medicine- 20 alcohol 20 001021 (i) Medicinal preparations containing self- 4 generated alcohol which are not capable of being consumed as ordinary alcoholic beverages 4 001022 (ii) Medicinal preparations containing self- 001023 generated alcohol which are capable of being consumed as ordinary alcoholic beverages (iii) All other containing alcohol which are 4 prepared distillation or to which alcohol has been added 001024 (iv) Medicinal preparations not 111030 001040 alcohol but containing narcotic drug or containing 20 narcotic 4 3. Homeopathic preparations containing alcohol 4. Toilet Preparations Toilet preparations containing alcohol or narcotic 50 drug or narcotic. 27 CODE DESCRIPTION OF GOODS Alcoholic Liquors for Human Consumption as notified under proviso to Section 3 ( 1 ) of CTA, 75 Goods of heading 220300 of Customs Tariff Act-75 AD.VAL SPEC. UQC FOR RATE RATE SPEC. RATE 002011 Not exceeding US $ 20 per case 150 002012 Exceeding US $ 20 but not exceeding US $ 40 per 100 case 002013 Exceeding U....
X X X X Extracts X X X X
X X X X Extracts X X X X
....oms Tariff Act- 75 003111 Not exceeding US $ 20 per case 150 003112 Exceeding US $ 20 but not exceeding US $ 40 per case 100 003113 Exceeding US $ 40 per case 75 Goods of heading 220860 of Customs Tariff Act- 75 003211 Not exceeding US $ 20 per case 150 003212 003213 Exceeding US $ 20 but not exceeding US $ 40 per case Exceeding US $ 40 per case 100 75 CODE DESCRIPTION OF GOODS AD.VAL SPEC. RATE UQC FOR RATE SPEC. RATE Goods of heading 220870 of Customs Tariff Act- 003311 Not exceeding US $ 20 per case 150 003312 Exceeding US $ 20 but not exceeding US $ 100 40 per case 003313 Exceeding US $ 40 per case 75 29 Goods of heading 220890 of Customs Tariff Act- 003411 Not exceeding US $ 20 per case 150 003412 Exceeding US $ 20 but not exceeding US $ 100 40 per case 003413 Exceeding US $ 40 per case 009000 C. All other goods, not leviable to any excise duty (e.g. live animals, cereals, oil 75 00 00 seeds etc.) Annexure- 'A' (EXPORT) DECLARATION FORM FOR EXPORT OF GOODS To be Filled in by the Service Centre Date of Presentation ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....rency Currency Unit in Exchange Effective Bank Name Certificate Certificate Code/Name 1 Rupees 2 Rate Date 3 4 5 Number 6 Date 7 28. Item Wise Details (To be provided for each invoice separately) 34 =4 Whether Rewar Sche Third d Item Descriptio Accessorie No. Accounting Present Category RITC Quanti Sr. No. n of Code ty Accoun- Item ting Unit Rate me Party Availe Goods if any of Units Unit For Rate Market Value if NFEI Code Export d Exports (Y/N) (Y/N)? 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Note: Column 12 whether third part export: Need to be provided for Scheme Codes involving DBK and DEPB only. For the scheme code involving DEEC, EPCG, Job Work, DFRC etc. system would determine the third party export automatically. 29. Drawback Particulars 30. DEEC/EPCG Licenses Particulars Invoice Item 31. Serial Serial Number Number Registration Number Serial Number DEEC/EPCG Licences Particulars Serial Number Quantity Accounting Unit in Part (E) in....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... Whether MODVAT Availed (Y/N) Whether MODVAT Reversed (Y/N) 36. Cess Particulars Invoice Serial Number Item Serial Number Cess Applicable (Y/N) 39 If Cess Applicable Cess Serial Number Cess Quantity 1 2 3 4 150 5 6 7 37. CENVAT Particulars Invoice Number Item Serial Number Certificate Number Certificate Date Central Excise Office Code Code Assessee Valid Upto 1 2 3 4 38. Third Party Exports Invoice Number Item Serial Number IE Code Name of the Manufacturer Branch Serial Number Address 40 40 1 2 3 4 5 6 Note: If the third party is also a regular exporter, IE Code and branch serial number as registered with DGFT has to be provided. Otherwise, name and address of the manufacturer is to be declared. 39. AR4 Particulars Invoice Item AR4 Particulars Serial Serial AR4 Number AR4 Date Commissionearate Range Number Number Division Remarks 1 2 3 4 5 6 7 8 40. Documents & Releasing Agencies Particulars Document Type (Q/I/L/C/O) Document Description....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... 4. I/We am/are OR am/are not in Caution List of the Reserve Bank of India. Date.. (Signature of Exporter) Name..... State appropriate date of delivery which must be the due date for payment of within six months from the data of shipment, whichever is earlier, but for exports to warehouses established outside India with permission of the Reserve Bank, the date of delivery must be within fifteen months. * Strike out whichever is not applicable. 44 ANNEXURE - 'C' (EXPORT) Shipping Bill No. 1. Master Airway Bill No. 2. Total Packets in Master Airway Bill 3. No.of Packets in the present consignment 4. House Airway Bill No. 5. (a) Seal No. (b) Name of the Agency 6. Marks&No.s 7. Nature of the Cargo (Boxes/cartons/packets etc.,) 8. Gross weight 9. Net weight 10. Unit Weight (KGs/Nosetc) 11. Packet Details Group 1. 2. From To Type (Boxes/Cartons) 13.Details of AR4, if any: Sl. No. AR4 No. Date Commissionrate Division Range Remarks 14. (a) Nature of contact: [1] FOB [2] CIF [3] CF [4]CI (b) Whether unit price includes: [F] Freight [I] Insurance [B] Both Freight & Insurance [....