TaxTMI 
TaxTMI 
Amendments to the list of specified goods (SCOMET) that was notified vide Notification No.38 RE-2010) /2009-2014 dated 31st March, 2011
X X X X Extracts X X X X
X X X X Extracts X X X X
....een made are as follows:- (1) In Category 3A113, the existing entry has been numbered as "a". After the entry against "a", entry "b" has been inserted. (2) In Category 3A201, after the entry against clause f, clause "g" has been inserted. (3) In Category 3A301, for the word "spherical" the words "spherical or spheroidal" has been substituted. (4) In Category 3A303, new entry has been added after the entry "Polybutadiene acrylonitrile (PBAN)". (5) In Category 3A306, some figures and words have been added after the letters "(HNF),". (6) In Category 3A310, after the entry against clause d; clauses "e", "f " and "g" have been inserted. (7) In Category 3A401, after the entry against clause d, clause "e" has been inserted. (8) In Category 3B007, after the word "machining", the word ", extruding" has been added. (9) Category 5A201, Category 5A206, and Category 5A217.c. have been substituted. (10) In Category 5A217, after the entry against clause e, clause "f " has been inserted. (11) In Category 5B, after the entry against clause l, clause "m" has been inserted. (12) In 5C007, the existing entry has been numbered as "1" after which entry "2"....
X X X X Extracts X X X X
X X X X Extracts X X X X
....anufacture, processing and use of Special Chemicals, Organisms, Materials, Equipment and Technologies (SCOMET) listed below to obtain permission of the Central Government before entering into any arrangement or understanding that involves an obligation to facilitate or undertake site visits, on-site verification or access to records/ documentation, by foreign Governments or foreign third parties, either acting directly or through an Indian party or parties. Requests for such permissions shall be considered in the manner in which requests for export/import licence are considered. Provided that where obligations involving site visits, on-site verification or access to records/ documentation by foreign governments or foreign third parties are to be undertaken pursuant to a bilateral agreement or a multilateral treaty to which India is a party, the provisions of the relevant agreement or treaty shall apply. Exporters are advised to refer to the relevant guidelines relating to the export of SCOMET items in the Handbook of Procedures (Vol.I), as issued from time to time. Glossary: Expressions used in the SCOMET List have the following meanings: "Accuracy" usually measured in ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....Provide output of data. N.B.: Modifications of a stored sequence of instructions include replacement of fixed storage devices, but not a physical change in wiring or interconnections. "Explosives": Solid, liquid or gaseous substances or mixtures of substances which, in their application as primary, booster, or main charges in warheads, demolition and other applications, are required to detonate. "Fibrous or filamentary materials" include: a. Continuous "monofilaments"; b. Continuous "yarns" and "rovings"; c. "Tapes", fabrics, random mats and braids; d. Chopped fibres, staple fibres and coherent fibre blankets; e. Whiskers, either monocrystalline or polycrystalline, of any length; f. Aromatic polyamide pulp. "Hybrid computer" means equipment which can perform all of the following: a. Accept data; b. Process data, in both analogue and digital representations; and c. Provide output of data. "Image enhancement" means the processing of externally derived information-bearing images by algorithms such as time compression, filtering, extraction, selection, correlation, convolution or transformations between domains (e.....
X X X X Extracts X X X X
X X X X Extracts X X X X
....It includes the uncorrected systematic deviations, the uncorrected backlash and the random deviations. "Microcircuit": A device in which a number of passive and/or active elements are considered as indivisibly associated on or within a continuous structure to perform the function of a circuit. "Microprogrammes": A sequence of elementary instructions maintained in a special storage, the execution of which is initiated by the introduction of its reference instruction register. "Missiles" means complete rocket systems and unmanned aerial vehicle systems. "Modified" in the context of "software" describes "software" which has been intentionally changed such that it has properties that make it fit for specified purposes or applications. Its properties may also make it suitable for purposes or applications other than those for which it was "modified." "Monofilament" or filament is the smallest increment of fibre, usually several micrometres in diameter. "Monolithic integrated circuit" means a combination of passive or active 'circuit elements' or both which: a. Are formed by means of diffusion processes, implantation processes or deposition processes in or....
X X X X Extracts X X X X
X X X X Extracts X X X X
....rmation from being in "public domain". "Radiation hardened": Means that the component or equipment is designed or rated to withstand radiation levels which meet or exceed a total radiation dose of 5 x 103 Gy or 5 x 105 rads (Si). "Required": As applied to "technology", refers to only that portion of "technology" which is peculiarly responsible for achieving or exceeding the controlled performance levels, characteristics or functions. Such "required" "technology" may be shared by different products. "Resolution" means the least increment of a measuring device; or on digital instruments, the least significant bit. "Roving" is a bundle (typically 12-120) of approximately parallel 'strands'. N.B.: 'Strand' is a bundle of "monofilaments" (typically over 200) arranged approximately parallel. "Settling time" means the time required for the output to come within one-half bit of the final value when switching between any two levels of the converter. "Signal processing" means the processing of externally derived information-bearing signals by algorithms such as time compression, filtering, extraction, selection, correlation, convolution or transformations between domains (e....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... b. the development of, or the carrying out of, an industrial or commercial activity or the provision of a service of any kind. Explanation: When technology is described wholly or partly by reference to the uses to which it (or the goods to which it relates) may be put, it shall include services which are provided or used, or which are capable of being used, in the development, production or use of such technology or goods. "Tow" is a bundle of "monofilaments", usually approximately parallel. "Toxins" means toxins in the form of deliberately isolated preparations or mixtures, no matter how produced, other than toxins present as contaminants of other materials such as pathological specimens, crops, foodstuffs or seed stocks of "microorganisms". "Unmanned Aerial Vehicle" ("UAV") means any aircraft capable of initiating flight and sustaining controlled flight and navigation without any human presence on board. "Usable in," "usable for," "usable as" or "capable of" qualifies the description of equipment, parts, components, materials, technology or "software" which are suitable for a particular purpose. There is no requirement that the equipment, parts....
X X X X Extracts X X X X
X X X X Extracts X X X X
....A4 High explosives 3A5 Stealth materials 3B Materials processing and production equipment, related technology and specially designed components and accessories therefor. 3C [Reserved] 3D Chemical and biomaterial manufacturing and handling equipment and facilities Category 4 Nuclear-related other equipment and technology, not controlled under Category 0 4A Equipment, assemblies, components including test and production equipment 4B Equipment, assemblies, components including test and measurement equipment usable in development of nuclear explosive devices 4C Technology Category 5 Aerospace systems, equipment, including production and test equipment, related technology and specially designed components and accessories therefor. 5A Rocket systems 5A1 Systems 5A2 Production and test equipment 5A3 Technology 5B Unmanned aerial vehicles 5C Avionics and navigation systems 5D Manned-aircraft, aero-engines, related equipment and components 5E Micro-light aircraft and powered 'hang-gliders' Category 6 [Reserved] Category 7&nbs....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... 0A206 Such other fissionable material determined by the Central Government from time to time, but the term "special fissionable material" does not include source material. Note: Any quantity of special fissionable material is prescribed substance. 0A3 Other Materials 'Other Materials' means non-nuclear materials for reactors, nuclear related dual-use materials indicated below and such materials as determined by the Central Government from time to time. 0A301 Deuterium, heavy water (deuterium oxide) and any other deuterium compound, in which the ratio of deuterium to hydrogen atoms exceeds 1:5000, in quantities exceeding 5 kilograms of deuterium in one consignment or 25 kilograms of deuterium in any period of 12 months. 0A302 Nuclear grade graphite / carbon, having a purity level better than 5 parts per million (ppm) boron equivalent and with a density greater than 1.5 gram/cc in quantities exceeding 30 metric tons in any period of 12 months. 0A303 Zirconium with hafnium content of less than 1 part to 500 parts of zirconium by weight (i.e. less than 2000 ppm) in the form of metal, its alloys, compounds, manufactures thereof, w....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... Note: A product or device containing less than 1gm of Helium-3 is excluded. 0A313 Alpha-emitting radionuclides: Alpha-emitting radionuclides having an alpha half-life of 10 days or greater but less than 200 years, in the following forms: a. Elemental; b. Compounds having a total alpha activity of 37 GBq per kg or greater; c. Mixtures having a total alpha activity of 37 GBq per kg or greater; d. Products or devices containing any of the foregoing. Alpha emitters controlled by this item include: Actinium-225 Actinium-227 Americium-242m Californium-248 Californium-250 Californium-252 Californium-253 Californium-254 Curium-240 Curium-241 Curium-242 Curium-243 Curium244 Einsteinium-252 Einsteiniu....
X X X X Extracts X X X X
X X X X Extracts X X X X
....cilities or plants, and equipment therefor e. Lithium isotope separation facilities or plants, and equipment therefor 0B003 Plants for reprocessing of irradiated nuclear fuel and equipment, components and systems specially designed, prepared or adapted or used or intended to be used in such plants, including but not limited to: a. Irradiated fuel element chopping machines designed for remote operation b. Dissolvers capable of withstanding hot and highly corrosive liquid for dissolution of irradiated nuclear fuel and which can be remotely loaded and maintained c. Solvent extractors and solvent extraction equipment resistant to the corrosive effect of nitric acid d. Chemical holding or storage vessels resistant to the corrosive effect of nitric acid e. Industrial equipment including assemblies and components as follows: 1. High density (lead glass or other) radiation shielding windows 2. Radiation hardened TV cameras, or lenses therefor 3. 'Robots' or 'end effectors' specially designed for handling high explosives; and control units therefor 4. Remote manipulators that can be used to provide remote actions in radiochemical....
X X X X Extracts X X X X
X X X X Extracts X X X X
....-ray examination of pin (or rod) end cap welds, 2) helium leak detection from pressurized pins (or rods), and 3) gamma-ray scanning of the pins (or rods) to check for correct loading of the fuel pellets inside. 0B007 Plants or systems for production, handling, storage and transportation of Radioisotopes in quantities exceeding 100 Curies (3.7 X 10 12 Becquerel). 0B008 Neutron generators including neutron chain reacting assemblies and fusion assemblies of all kinds for producing fissile materials 0C Technology Technology and software for the development, production or use of prescribed substances or prescribed equipment specified in 0A or 0B. Category 1 Toxic chemical agents and other chemicals 1A Export of the following chemicals is prohibited: (This corresponds to Schedule 1 to the Chemical Weapons Convention (CWC)) Note: Where reference is made below to groups of di-alkylated chemicals, followed by a list of alkyl groups in parentheses, all chemicals possible by all possible combinations and alkyl groups listed in parentheses are considered prohibited unless explicitly exempted. (1). O-Alky (<C10, incl....
X X X X Extracts X X X X
X X X X Extracts X X X X
....(b) A general permission valid for a period of two years may be applied for export of chemicals in this category. This permission shall be subject to the condition that for each export consignment, exporters shall, within 30 days of exports, notify the details to the National Authority, Chemical Weapons Convention, Cabinet Secretariat ; Ministry of External Affairs (D&ISA); Department of Chemicals and Petrochemicals and the Directorate General of Foreign Trade and submit to DGFT, a copy of Bill of Entry into the destination State Party within 30 days of delivery. Note: Where reference is made below to groups of dialkylated chemicals, followed by a list of alkyl groups in parentheses, all chemicals possible by all possible combinations and alkyl groups listed in parentheses are included unless explicitly exempted. 1. Amiton 0,0-Diethyl S-[2-(diethylamino) ethyl)] phosphorothiolate and corresponding alkylated or protonated salts 2. PFIB: 1,1,3,3,3,-Pentafluoro-2-(trifluoromethyl)1-propene 3. BZ: 3-Quinuclidinyl benzilate 4. Chemicals, except for those listed in Schedule 1, containing a phosphorus atom to....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... 13. Phosphonic Acid, Methyl-compound with (aminoimino methyl) urea (1: 1) 2B04 84402-58-4 29209047 14. 1-Propanaminium N, N, N-trimethyl - 3- [1-oxo-9 octadecenyl) amino]-. (Z)- methyl methylphosphonate 2B04 70055-71-9 29209048 15. Phosphonic acid, [methyl bis (5-ethyl-2-methyl-2-oxido-1, 3, 2- dioxaphosphorinan-5-yl) methyl] ester 2B04 42595-45-9 29209051 16. Phosphonic acid, [methyl-(5-ethyl-2-methyl 2-oxido-1,3,2-dioxaphosphorinan-5-yl) methyl] ester 2B04 41203-81-0 29209052 17. Phosphonic acid, propyl-dimethyl ester 2B04 18755-43-6 29209053 18. Phosphonous acid, methyl-diethyl ester 2B04 15715-41-0 29209054 19. Phosphonic acid, ethyl- 2B04 6779-09-5 29209055 20. Phosphonic acid, propyl- 2B04 4672-38-2 29209056 21. Phosphinic acid, methyl- 2B04 4206-94-4 29209057 22. Phosphonochloridic acid, methyl-, methyl ester 2B04 1066-52-0 29209058 23. Phosphonothioic dichloride, ethyl- 2B04 993-43-1 29209061 24. Phosphonic acid methyl- 2B04 993-13-5 29209062 25. Phosphonic acid, methyl-, dimethyl ester ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....-45-9 29209041 9. Triethyl Phosphite 3B09 122-52-1 29209042 10. Dimethyl Phosphite 3B10 868-85-9 29209043 11. Diethyl Phosphite 3B11 762-04-9 29209044 12. Sulphur monochloride 3B12 10025-67-9 28121042 13. Sulphur dichloride 3B13 10545-99-0 28121043 14. Thionyl Chloride 3B14 7719-09-7 28121047 15. Ethyldiethanolamine 3B15 139-87-7 29221211 16. Methyldiethanolamine 3B16 105-59-9 29221212 17. Triethanolamine 3B17 102-71-6 29221300 Category 2 Micro-organisms, toxins 2A Bacteria, whether natural, enhanced or modified, either in the form of isolated live cultures or as material including living material which has been deliberately inoculated or contaminated with such cultures for the following: 2A001 Bacillus anthracis 2A002 Bordetella bronchoseptica 2A003 Brucella abortus 2A004 Brucella melitensis 2A005 Brucella suis 2A006 Chlamydia psittaci 2A007 Clostridium botulinum 2A008 Clostridium perfringes 2A009 Corynebacterium diphtheria 2A010 Fr....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... Toxoplasma gondii 2C015 Trichinella spiralis 2C016 Trypanosoma bruiei 2D Viruses, whether natural, enhanced or modified, either in the form of isolated live cultures or as material including living material which has been deliberately inoculated or contaminated with such cultures for the following: 2D001 African Horse Sickness virus 2D002 African Swine Fever virus 2D003 Avian influenza virus 2D004 Blue tongue virus 2D005 Camel pox virus 2D006 Chikungunya virus 2D007 Crimean-Congo hemorrhagic fever virus 2D008 Dengue virus 2D009 Eastern equine encephalitis virus 2D010 Ebola fever virus 2D011 Encephalomyocarditis virus (EMC) 2D012 Foot and Mouth Disease virus (all serotypes and subtypes) 2D013 Guanirito virus 2D014 Goatpox virus 2D015 Hantaan virus 2D016 Herpes virus simiae (monkey....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ich has been deliberately inoculated or contaminated with such cultures for the following: 2E001 Coxiella burnetti 2E002 Rickettsiae rickettsii 2E003 Rickettsia quintana 2E004 Rickettsia prowazebi 2F Toxins 2F001 Abrins 2F002 Aflatoxins 2F003 Anatoxins 2F004 Botulinum toxin (s) (clostradium botulinum) 2F005 Bungarotoxins 2F006 Clostridium perfringens toxins 2F007 Corynebacterium diphtheriae toxins 2F008 Cyanginosins (Microcystins) (Microcystic aeuginosa) 2F009 Enterotoxin (Staphylococcus aureus) 2F010 Neurotoxi....
X X X X Extracts X X X X
X X X X Extracts X X X X
....d sequences coding for any of the toxins specified above in 2F. Category 3 Materials, Materials Processing Equipment and related technologies 3A Materials 3A1 Special Materials 3A101 Zirconium, beryllium, magnesium, and alloys of these in particle size less than 60 µm 3A102 Maraging steel in any form in which any linear dimension exceeds 75 mm, or in the form of sheet, plate or tubing with a wall or plate thickness equal or less than 5 mm. 3A103 Tungsten (CAS 12070-12-1), molybdenum(CAS 1317-33-5), and alloys of those metals in the form of uniform spherical or atomized particles of size less than 500 µm 3A104 Germanium 3A105 Gallium 3A106 Indium 3A107 Titanium alloys including Titanium-stabilised Duplex Stainless Steel (Ti-DSS) (other than as specified at 0A307) 3A108 Aluminium alloys in any form 'capable of acquiring' an ultimate tensile strength of 460 MPa or more at 293 K (20 degrees C) Note: The phrase 'c....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ls having 'specific modulus' of 3.18 x 106 m or greater; and 'specific tensile strength' of 7.62 x 104 m or greater; c. Thermoset resin impregnated continuous yarns, rovings, tows or tapes with a width of 15 mm or less (prepregs), made from carbon or glass fibrous or filamentary materials specified in (a) or (b) above. 3A117 Carbon - carbon composites. 3A2 Structural Materials 3A201 Structural materials such as: a. Composite structures, laminates, resin impregnated fibre prepregs and metal coated fibre preforms made either with an organic matrix or metal matrix utilizing fibrous or filamentary reinforcements, and manufactures thereof, specially designed for use in rocket systems (including ballistic missile systems, space launch vehicles and sounding rockets), unmanned aerial vehicles and cruise missiles and subsystems thereof; b. Resaturated pyrolized (i.e. Carbon-Carbon) materials specially designed for rocket systems (including ballistic missile systems, space launch vehicles and ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....sp; (IRFNA) (CAS 8007-58-7), Ammonium perchlorate (CAS 7790-98-9), Ammonium Dinitramide (ADN) (CAS 140456-78-6), Hydrazinium Nitroformate (HNF), 2,4,6,8,10,12-Hexanitrohexaazaisowurtzitane (CL-20) (CAS 135285-90-4), Compounds composed of fluorine and one more of other halogens, oxygen or nitrogen. 3A307 Bonding agents - Tris (1-2 (2-methyl)) aziridinyl phosphine oxide (MAPO)(CAS 57-39-6), Trimesoyl-1-(2-ethyl) aziridene (HX-868, BITA)(CAS 7722-73-8), Tepanol (HX-878)(CAS 68412-46-4), Tepan (HX-879) ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....nbsp; 7. Dicyclohexyl ferrocene; 8. Diethyl ferrocene; 9. Dipropyl ferrocene; 10. Dibutyl ferrocene(CAS 1274-08-4); 11. Dihexyl ferrocene (CAS 93894-59-8); 12. Acetyl ferrocenes;  ....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... 82486-82-6); g. Dinitropropyl based plasticisers, as follows: 1. Bis (2,2-dinitropropyl) acetal (BDNPA) (CAS 5108-69-0); 2. Bis (2,2-dinitropropyl) formal (BDNPF) (CAS 5917-61-3). 3A311 Stabilisers as follows: a. 2-Nitrodiphenylamine (CAS 119-75-5); b. N-methyl-p-nitroaniline (CAS 100-15-2). 3A4 High explosives 3A40....
X X X X Extracts X X X X
X X X X Extracts X X X X
....d "production equipment", related "technology" and specially designed components and accessories therefor. 3B001 Remote manipulators that provide mechanical translation of human operator actions by electrical, hydraulic or mechanical means and operating arm and terminal fixture that can be used to provide remote actions; 3B002 Multidirectional, multidimensional weaving and interlacing machines, including adapters and modification kits for weaving, interlacing or braiding fibres to fabricate composite structures except textile machinery which has not been modified for rocket systems; 3B003 Equipment designed or modified for production of fibrous or filamentary materials as follows: converting polymeric substances; vapour deposition on heated filament substrates; wet spinning of refractory ceramics. 3B004 Equipment designed or modified for special fibre surface treatment or for producing prepregs and preforms, including rollers, tension stretchers, coating equipment, cutting equipment and clicker dies; 3B005 Chemical vapour deposition furnaces designed or modified for the densification of carbon-carbon composites. 3B006 Pyrolytic deposition a....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... or hydroclaves when used for the production of composites or partially processed composites. 3B019 Software specially designed or modified for the use of equipment for the production and handling of materials specified in 3A 3B020 Technology for the development, production or use of items in 3B 3C [Reserved] 3D Chemical and biomaterial manufacturing and handling equipment and facilities: 3D001 Reaction vessels, reactors or agitators, storage tanks, containers or receivers, heat exchangers or condensers, distillation or absorption columns, valves, remotely operated filling equipment, multi-walled piping, bellows, diaphragm pumps, vacuum pumps, fans, compressors, blowers, gas (including air) handling or other substance-transfer equipment wholly or partly made from any of the following materials; a. Nickel or alloys with more than 40% nickel by weight b. Alloys with more than 25% nickel and 20% chromium by weight (e.g. 'Hastelloy', 'Illium'. 'Inconel', 'Incoloy') c. Fluoropolymers d. Glass or glass lined (including vitrified or enamelled coating) e. &n....
X X X X Extracts X X X X
X X X X Extracts X X X X
....and production equipment 4A001 Flow-forming machines, spin-forming machines capable of flow-forming functions, and mandrels, as follows: a. For flow forming machines refer to 5A205. b. Spin forming machines having both of the following characteristics: 1. Three or more rollers (active or guiding); and 2. which can be equipped with 'numerical control' units or a computer control. c. Rotor-forming mandrels designed to form cylindrical rotors of inside diameter between 75 and 400 mm. Note: Item 4A001a and 4A001b include machines which have only a single roller designed to deform metal plus two auxiliary rollers which support the mandrel, but do not participate directly in the deformation process. 4A002 Machine tools, as follows, for removing or cutting metals, ceramics, or composites, which, according to the manufacturer's technical specifications, can be equipped with electronic devices for simultaneous contouring control in two or more axes: a. Machine tools for turning, that have positioning accuracies with all &nb....
X X X X Extracts X X X X
X X X X Extracts X X X X
....r national equivalents may be used for each machine tool model if provided to, and accepted by, national authorities instead of individual machine tests. Stated positioning accuracy are to be derived as follows: 1. Select five machines of a model to be evaluated; 2. Measure the linear axis accuracies according to ISO 230/2 (1988); 3. Determine the accuracy values (A) for each axis of each machine. The method of calculating the accuracy value is described in the ISO 230/2 (1988) standard; 4. Determine the average accuracy value of each axis. This average value becomes the stated positioning accuracy of each axis for the model (Âx,Ây...); 5. Since Item 4A002 refers to each linear axis, there will be as many stated positioning accuracy values as there are linear axes; 6. If any axis of a machine tool not controlled by Items 4A002a, 4A002b, or 4A002c has a stated positioning accuracy of 6 µm or better (less) for gr....
X X X X Extracts X X X X
X X X X Extracts X X X X
....does not control measuring interferometer systems, without closed or open loop feedback, containing a laser to measure slide movement errors of machine tools, dimensional inspection machines, or similar equipment. Technical Note: In Item 4A003b 'linear displacement' means the change of distance between the measuring probe and the measured object. c. Angular displacement measuring instruments having an angular position deviation equal to or better (less) than 0.00025°; Note: Item 4A003c does not control optical instruments, such as autocollimators, using collimated light to detect angular displacement of a mirror. d. Systems for simultaneous linear-angular inspection of hemi-shells, having both of the following characteristics: 1. Measurement uncertainty along any linear axis equal to or better (less) than 3.5 µm per 5 mm; and 2. Angular position deviation equal to or less than 0.02°. Notes: 1. Item 4A003 includes machine tools that can be used as measuring machines if they meet or exceed the criteria specified for the meas....
X X X X Extracts X X X X
X X X X Extracts X X X X
....en 20 and 2000 Hz; and 3. Capable of imparting forces of 50 kN or greater measured 'bare table'; b. Digital control units, combined with software specially designed for vibration testing, with a real-time bandwidth greater than 5 kHz and being designed for a system specified in Item 4A006a; c. Vibration thrusters (shaker units), with or without associated amplifiers, capable of imparting a force of 50 kN or greater measured 'bare table', which are usable for the systems specified in Item 4A006a; d. Test piece support structures and electronic units designed to combine multiple shaker units into a complete shaker system capable of providing an effective combined force of 50 kN or greater, measured 'bare table,' which are usable for the systems specified in Item 4A006a. Technical Note : In Item 4A006 'bare table' means a flat table, or surface, with no fixtures or fittings. 4A007 Vacuum or other controlled atmosphere metallurgical melting and casting furnaces and related equipment, as follows: a. Arc re-melt and casting furn....
X X X X Extracts X X X X
X X X X Extracts X X X X
....cy changers or generators having all of the following characteristics: a. Multiphase output capable of providing a power of 40 W or greater; b. Capable of operating in the frequency range between 600 and 2000 Hz; c. Total harmonic distortion better (less) than 10%; and d. Frequency control better (less) than 0.1%. Note: Frequency changers and generators especially designed or prepared for the gas centrifuge process are controlled under Prescribed Equipment (0B Category). Technical Note: Frequency changers in Item 4A011 are also known as converters or inverters. 4A012 Lasers, laser amplifiers and oscillators as follows: a. Copper vapour lasers having both of the following characteristics: 1. Operating at wavelengths between 500 and 600 nm; and 2. An average output power equal to or greater than 40 W; b. Argon ion lasers having both of the following characteristics: 1. Operating at wavelengths between 400 and 515 nm; and 2. An average output power greater than 40 W; c. Neodymium-doped (other than glass) lasers with an output wavelength between 1000 and 1100 nm having either of the following: 1. ....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... and at a repetition rate greater than 250 Hz. 4A013 Valves having all of the following characteristics: a. A nominal size of 5 mm or greater; b. Having a bellows seal; and c. Wholly made of or lined with aluminium, aluminium alloy, nickel, or nickel alloy containing more than 60% nickel by weight. Technical Note: For valves with different inlet and outlet diameter, the nominal size parameter in Item 4A013a refers to the smallest diameter. 4A014 Superconducting solenoidal electromagnets having all of the following characteristics: a. Capable of creating magnetic fields greater than 2 T; b. A ratio of length to inner diameter greater than 2; c. Inner diameter greater than 300 mm; and d. Magnetic field uniform to better than 1% over the central 50% of the inner volume. Note: Item 4A014 does not control magnets specially designed for and exported as part of medical nuclear magnetic resonance (NMR) imaging systems. ('As part of' does not necessarily mean physical part in the sa....
X X X X Extracts X X X X
X X X X Extracts X X X X
....bsp; Rotor fabrication or assembly equipment, rotor straightening equipment, bellows- forming mandrels and dies, as follows: a. Rotor assembly equipment for assembly of gas centrifuge rotor tube sections, baffles, and end caps; Note: Item 4A020a includes precision mandrels, clamps, and shrink fit machines. b. Rotor straightening equipment for alignment of gas centrifuge rotor tube sections to a common axis; Technical Note: In Item 4A020b such equipment normally consists of precision measuring probes linked to a computer that subsequently controls the action of, for example, pneumatic rams used for aligning the rotor tube sections. c. Bellows-forming mandrels and dies for producing single -convolution bellows. Technical Note: The bellows referred to in Item 4A020c have all of the following characteristics: 1. Inside diameter between 75 and 400 mm; 2. Length equal to or greater than 12.7 mm; 3. Single convolution depth greater than 2 mm; and 4. Made of high-strength aluminium alloys, maraging steel, or high strength fibrous or filamentary materials....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... spectrometers which have a source chamber constructed from, lined with or plated with materials resistant to UF6; e. Molecular beam mass spectrometers having either of the following characteristics: 1. A source chamber constructed from, lined with or plated with stainless steel or molybdenum, and equipped with a cold trap capable of cooling to 193 K (-80 °C) or less; or 2. A source chamber constructed from, lined with or plated with materials resistant to UF6; f. Mass spectrometers equipped with a micro-fluorination ion source designed for actinides or actinide fluorides. Note: Mass spectrometers especially designed or prepared for analyzing on-line samples of uranium hexafluoride are controlled under Prescribed Equipment (0B Category). 4A025 Specialized packings which may be used in separating heavy water from ordinary water, having both of the following characteristics: a. Made of phosphor bronze mesh chemically treated to improve wettability; and b. Designed to be used in vacu....
X X X X Extracts X X X X
X X X X Extracts X X X X
....s with low sulphur content and with an austenitic ASTM (or equivalent standard) grain size number of 5 or greater; or 2. Equivalent materials which are both cryogenic and H2-compatible; and d. With internal diameters of 1 m or greater and effective lengths of 5 m or greater. 4A030 Ammonia synthesis converters or synthesis units, in which the synthesis gas (nitrogen and hydrogen) is withdrawn from an ammonia/hydrogen high-pressure exchange column and the synthesized ammonia is returned to said column. 4B Equipment, assemblies and components, including test and measurement equipment usable in development of nuclear explosive devices 4B001 Photomultiplier tubes having both of the following characteristics: a. Photocathode area of greater than 20 cm2; and b. Anode pulse rise time of less than 1 ns. ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....bsp; 225000 frames per second; b. Streak cameras with writing speeds greater than 0.5 mm/µs. Note: In Item 4B004 components of such cameras include their synchronizing electronics units and rotor assemblies consisting of turbines, mirrors, and bearings. 4B005 Electronic streak cameras, electronic framing cameras, tubes and devices, as follows: a. Electronic streak cameras capable of 50 ns or less time resolution; b. Streak tubes for cameras specified in Item 4B005a; c. Electronic (or electronically shuttered) framing cameras capable of 50 ns or less frame exposure time; d. Framing tubes and solid-state imaging devices for use with cameras specified in Item 4B005c, as follows: 1. Proximity focused image intensifier tubes having the photocathode deposited on a transparent conductive coating to decrease photocathode sheet resistance; 2. Gate silicon intensifier target (SIT) vidicon tubes, where a fast system allows gating the....
X X X X Extracts X X X X
X X X X Extracts X X X X
....em 4B008 the detonators of concern all utilize a small electrical conductor (bridge, bridge wire, or foil) that explosively vaporizes when a fast, high-current electrical pulse is passed through it. In nonslapper types, the exploding conductor starts a chemical detonation in a contacting high-explosive material such as PETN (pentaerythritoltetranitrate). In slapper detonators, the explosive vaporization of the electrical conductor drives a flyer or slapper across a gap, and the impact of the slapper on an explosive starts a chemical detonation. The slapper in some designs is driven by magnetic force. The term exploding foil detonator may refer to either an EB or a slapper-type detonator. Also, the word initiator is sometimes used in place of the word detonator. 4B009 Firing sets and equivalent high-current pulse generators, as follows: a. Explosive detonator firing sets designed to drive multiple controlled detonators specified by Item 4B008 above; b. Modular electrical pulse generators (pulsers) having all of the following charact....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... an external vacuum system; and b. Utilizing electrostatic acceleration to induce a tritium-deuterium nuclear reaction. 4C Technology Technology for the development, production or use of items in 4A and 4B. 5 Aerospace systems, equipment including production and test equipment, related technology, and specially designed components and accessories therefor 5A Rocket Systems (including ballistic missiles, space launch vehicles and sounding rockets) 5A1 Systems 5A101 Systems for missiles and rockets, including: a. complete rocket systems (including ballistic missile systems, space launch vehicles and sounding rockets); b. complete rocket stages with engines; c. solid or liquid fuel rocket engines and their control systems including liquid propellant apogee engines designed or modified for sat....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ts, motors or engines, or which are capable of simultaneously measuring the three axial thrust components. 5A204 Vibration test equipment (vibration test systems and vibration thrusters) and components using digital control techniques and feedback or closed loop test equipment and software thereof (Refer 4A006). 5A205 Flow-forming machines and specially designed components thereof which, according to the manufacturers technical specification, 1. can be equipped with numerical control units or a computer control, even when not equipped with such units at delivery; and 2. have more than two axes which can be coordinated simultaneously for contouring control. Note: Item 5A205 includes machines which have only a single roller designed to deform metal plus two auxiliary rollers which support the mandrel, but do not participate directly in the deformation process. 5A206 Filament winding machines or fibre placement machines for which the motion for positioning wrapping and winding fibres can be coordinated and programmed in two or more axes; prec....
X X X X Extracts X X X X
X X X X Extracts X X X X
....acilities usable for rocket systems (including ballistic missile systems, space launch vehicles and sounding rockets), unmanned airborne system and cruise missiles as follows:- a. apparatus, devices and vehicles, designed or modified for the transport, handling, control, activation and launching of the systems. b. gravity meters (gravimeters), gravity gradiometers, and specially designed components thereof, designed or modified for airborne or marine use usable for complete rocket systems and for complete unmanned aerial vehicle systems (including cruise missile systems target drones and reconnaissance drones) c. telemetry and tele-command equipment, including ground equipment, designed or modified for complete rocket systems and complete unmanned aerial vehicle systems and cruise missiles, excluding equipment designed or &....
X X X X Extracts X X X X
X X X X Extracts X X X X
....nt for command and control; d. Complete unmanned aerial vehicle systems (including cruise missile systems, target drones and reconnaissance drones); e. Light weight Turbojet and turbofan engines (including turbo compound engines);. f. Ramjet / Scramjet / pulse jet/ combined cycle engines, including devices to regulate combustion, and specially designed components; g. Complete unmanned aerial vehicle systems having an autonomous flight control and navigation capability or capability of controlled flight out of the direct vision range involving a human operator, designed or modified to incorporate an aerosol dispensation mechanism, or capable of carrying elements of a payload in the form of a particulate or liquid other than fuel components of such vehicles; Note: This category does not contr....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ertial equipment and specially designed software thereof and specially designed components therefor. 5C004 Inertial or other equipment using accelerometers or systems incorporating such equipment, and specially designed integration software therefor; 5C005 Encrypted telemetry systems, equipment and software thereof. 5C006 Flight control system (including servo valves) designed or modified for the systems as follows: a. Hydraulic, mechanical, electro-optical or electro-mechanical flight control systems (including fly-by-wire systems); b. Attitude control equipment; c. Design technology for integration of flight control, guidance, and propulsion data into a flight management system for optimisation of rocket system trajectory; d. Specially designed test, calibration, and alignment thereof. 5C007 1. Integrated navigation system incorporating an inertial measurement device (example: an attitude and heading reference system, inertial re....
X X X X Extracts X X X X
X X X X Extracts X X X X
....nbsp; hazards from external sources. d. Passive sensors for determining bearings to electromagnetic sources (direction finding devices) or terrain characteristics e. Receiving equipment for Global Navigation Satellite Systems (GNSS: e.g. GPS, GLONASS, GALILEO), capable of operating at aircraft speeds and altitudes or above. f. Terrain contour mapping equipment, Scene mapping and correlation (both digital and analogue) equipment, Doppler navigation radar equipment, Passive interferometer equipment and Imaging sensor equipment (both active and passive) g. Design technology for electromagnetic shielding systems, the configuration of hardened electrical circuits and subsystems and for the determination of hardening criteria. 5C011 On-board ele....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ipment. Note 2: Motion simulators or rate tables specified in 5C017 remain controlled whether or not slip rings or integrated non-contact devices are fitted at time of export. 5C018 Position tables (equipment capable of precise rotary positioning in any axes) having two axes or more and a position accuracy equal to or better than 5 arc second. 5C019 Centrifuges capable of imparting accelerations above 100 g and designed or modified to incorporate slip rings or integrated non-contact devices capable of transferring electrical power, signal information, or both. Note: Centrifuges specified in 5C019 remain controlled whether or not slip rings or integrated non-contact devices are fitted at time of export. 5C020 Design technology for integration of air vehicle fuselage, propulsion system and lifting control surfaces designed or modified for the unmanned aerial vehicle systems to optimize aerodynamic performance throughout the flight regime of an unmanned aerial vehicle system. 5C021 &n....
X X X X Extracts X X X X
X X X X Extracts X X X X
....tapults and cartridge actuated devices for emergency escape of personnel from aircraft; f. Parachutes: 1. Paragliders, drag parachutes, drogue parachutes for stabilization and attitude control of dropping bodies, (e.g. recovery capsules, ejection seats, bombs); 2. Drogue parachutes for use with ejection seat systems for deployment and inflation sequence regulation of emergency parachutes; 3. Recovery parachutes for guided missiles, drones or space vehicles; 4. Approach parachutes and landing deceleration parachutes. g. Automatic piloting systems for parachuted loads, equipment specially designed or modified for military use for controlled opening jumps at any height, including oxygen equipment. Note 1: 5D001b does not control aircraft or variants of those aircraft specially designed for military use which: 1. Have been certified for civil use by the civil aviation authority of India, and 2. Are not configur....
X X X X Extracts X X X X
X X X X Extracts X X X X
....nbsp; 218 K (-55°C); or c. Rated for operation over the entire ambient temperature range from 218 K (- 55°C) to 398 K (+125°C). 7A006 Radiation-hardened analogue-to-digital and digital-to-analogue converter integrated circuits, as follows: a. Analogue-to-digital converters having any of the following: 1. A resolution of 8 bit or more, but less than 12 bit, with a total conversion time of less than 5 ns; 2. A resolution of 12 bit with a total conversion time of less than 200 ns; or 3. A resolution of more than 12 bit with a total conversion time of less than 2 µs; b. Digital-to-analogue converters with a resolution of 12 bit or more, and a settling time of less than 10 ns. 7A007 Detector units operating in the thermal infrared, ultraviolet, x-ray and gamma ray spectrum. 7A008 Focal plane assemblies for imaging cameras operating in the visible, near and thermal i....
X X X X Extracts X X X X
X X X X Extracts X X X X
....nbsp; 'image enhancement' or signal processing other than when supplied as integral adjuncts to medical imaging (eg CAT-scanning) equipment. 7C002 Analogue, digital or hybrid computers, digital differential analysers, and specially designed software therefor, for use in, or for modelling, simulation, or design integration of rocket systems, unmanned aerial vehicles and cruise missiles. 7C003 Technology for the development, production or use of items in 7C002. 7D Information technology including information security 7D001 Data processing security equipment, data security equipment and transmission and signalling line security equipment, using ciphering processes. 7D002 Identification, authentication and keyloader equipment and key management, manufacturing and distribution equipment. 7E [Reserved] ============= Document 1 (Annexure to Notification No. 37(RE-2012)/2009-2014 Dated 14.03.2013) Special Chemicals, Organisms, Materials, Equipment and Technologies (SCOMET) export of which is regulated Export of Special Chemicals....
X X X X Extracts X X X X
X X X X Extracts X X X X
....are to be undertaken pursuant to a bilateral agreement or a multilateral treaty to which India is a party, the provisions of the relevant agreement or treaty shall apply. Exporters are advised to refer to the relevant guidelines relating to the export of SCOMET items in the Handbook of Procedures (Vol.I), as issued from time to time. Page 1 of 53 Glossary: Expressions used in the SCOMET List have the following meanings: "Accuracy" usually measured in terms of inaccuracy, means the maximum deviation, positive or negative, of an indicated value from an accepted standard or true value. "Active flight control systems" are systems that function to prevent undesirable “aircraft†and missile motions or structural loads by autonomously processing outputs from multiple sensors and then providing necessary preventive commands to effect automatic control. "Aircraftâ€: A fixed wing, swivel wing, rotary wing (helicopter), tilt rotor or tilt-wing airborne vehicle. "Angular position deviation†means the maximum difference between angular position and the actual, very accurately measured angular position after the work piece mount....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... mats and braids; d. Chopped fibres, staple fibres and coherent fibre blankets; e. Whiskers, either monocrystalline or polycrystalline, of any length; f. Aromatic polyamide pulp. “Hybrid computer†means equipment which can perform all of the following: a. Accept data; b. Process data, in both analogue and digital representations; and C. Provide output of data. “Image enhancement†means the processing of externally derived information-bearing images by algorithms such as time compression, filtering, extraction, selection, correlation, convolution or transformations between domains (e.g., fast Fourier transform or Walsh transform). This does not include algorithms using only linear or rotational transformation of a single image, such as translation, feature extraction, registration or false coloration. “Information security†is all the means and functions ensuring the accessibility, confidentiality or integrity of information or communications, excluding the means and functions intended to safeguard against malfunctions. This includes cryptography, ‘cryptanalysis', protection against compromisin....
X X X X Extracts X X X X
X X X X Extracts X X X X
....s initiated by the introduction of its reference instruction register. "Missiles" means complete rocket systems and unmanned aerial vehicle systems. "Modified" in the context of “software†describes “software†which has been intentionally changed such that it has properties that make it fit for specified purposes or applications. Its properties may also make it suitable for purposes or applications other than those for which it was "“modified." "Monofilament†or filament is the smallest increment of fibre, usually several micrometres in diameter. "Monolithic integrated circuit†means a combination of passive or active ‘circuit elements' or both which: a. Are formed by means of diffusion processes, implantation processes or deposition processes in or on a single semiconducting piece of material, a so-called ‘chip'; b. Can be considered as indivisibly associated; and c. Perform the function(s) of a circuit. N.B.: ‘Circuit element' is a single active or passive functional part of an electronic circuit, such as one diode, one transistor, one resistor, one capacitor, etc. "Neural ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....total radiation dose of 5 x 10³ Gy or 5 x 105 rads (Si). "Required": As applied to “technologyâ€, refers to only that portion of “technology†which is peculiarly responsible for achieving or exceeding the controlled performance levels, characteristics or functions. Such “required†“technology" may be shared by different products. “Resolution†means the least increment of a measuring device; or on digital instruments, the least significant bit. "Roving" is a bundle (typically 12-120) of approximately parallel strands'. N.B.: ‘Strand' is a bundle of “monofilaments†(typically over 200) arranged approximately parallel. “Settling time†means the time required for the output to come within one-half bit of the final value when switching between any two levels of the converter. "Signal processing†means the processing of externally derived information-bearing signals by algorithms such as time compression, filtering, extraction, selection, correlation, convolution or transformations between domains (e.g., fast Fourier transform or Walsh transform). "Software":....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... b. the development of, or the carrying out of, an industrial or commercial activity or the provision of a service of any kind. Explanation: When technology is described wholly or partly by reference to the uses to which it (or the goods to which it relates) may be put, it shall include services which are provided or used, or which are capable of being used, in the development, production or use of such technology or goods. "Tow" is a bundle of "monofilaments", usually approximately parallel. "Toxins" means toxins in the form of deliberately isolated preparations or mixtures, no matter how produced, other than toxins present as contaminants of other materials such as pathological specimens, crops, foodstuffs or seed stocks of “microorganismsâ€. "Unmanned Aerial Vehicle†(“UAVâ€) means any aircraft capable of initiating flight and sustaining controlled flight and navigation without any human presence on board. “Usable in,†“usable for,†“usable as" or "capable of" qualifies the description of equipment, parts, components, materials, technology or “software†which are suita....
X X X X Extracts X X X X
X X X X Extracts X X X X
....y, not controlled under Category 0 Equipment, assemblies, components including test and production equipment Equipment, assemblies, components including test and measurement equipment usable in development of nuclear explosive devices Technology Page 7 of 53 Category 5 Aerospace systems, equipment, including production and test equipment, related technology and specially designed components and accessories therefor. Rocket systems Systems Production and test equipment Technology Unmanned aerial vehicles Avionics and navigation systems Manned-aircraft, aero-engines, related equipment and components Micro-light aircraft and powered 'hang-gliders' 5A 5A1 5A2 5A3 5B 5C 5D 5E Category 6 [Reserved] Category 7 32002 7A 7B 7C 7D 7E Electronics, computers, and information technology including information security Electronics Electronic test equipment Computers Information technology including information security [Reserved] Category 0 Nuclear materials, nuclear-related other materials, equipment and technology Note: Export of these items is regulated under the Atomic....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... in one consignment or 25 kilograms of deuterium in any period of 12 months. Nuclear grade graphite / carbon, having a purity level better than 5 parts per million (ppm) boron equivalent and with a density greater than 1.5 gram/cc in quantities exceeding 30 metric tons in any period of 12 months. Zirconium with hafnium content of less than 1 part to 500 parts of zirconium by weight (i.e. less than 2000 ppm) in the form of metal, its alloys, compounds, manufactures thereof, waste or scrap of any of the foregoing. Beryllium, its compounds, alloys and its minerals / concentrates including Beryl but excluding: a. beryllium windows used for x-ray machines and gamma ray detectors and b. beryl in the form of emeralds or aquamarines. Page 9 of 53 0A305 0A306 0A307 0A308 0A309 0A310 0A311 Lithium enriched in the Lithium-6 (6Li) isotope to greater than its natural isotopic abundance (i.e. more than 7.5%) and the products or devices containing enriched lithium such as elemental lithium, alloys, compounds, mixtures containing lithium, manufactures thereof, waste or scrap of any of the foregoing. Niobium and Tantalum, their....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... Curium-242 Americium-242m Californium-252 Curium-240 Curium-243 Einsteinium-253 Fermium-257 Neptunium-235 Einsteinium-252 Einsteinium-255 Gadolinium-148 Mendelevium-258 Plutonium-236 Plutonium-237 Plutonium-238 Plutonium-241 Polonium-209 Polonium-210 Polonium-208 Radium-223 Thorium-228 Thorium-227 Uranium-230 Uranium-232 ов OB001 OB002 Prescribed Equipment Nuclear Reactors; associated equipment, components, and systems specially designed, prepared, or adapted or used or intended to be used in such reactors:- a. Complete nuclear reactors b. Nuclear reactor vessels c. Nuclear reactor fuel charging and discharging machines d. Nuclear reactor control rods and equipment e. Nuclear reactor pressure tubes f. Zirconium tubes and assemblies of tubes in which hafnium to zirconium ratio is 1:500 or less g. Primary coolant pumps h. Nuclear reactor internals i. Heat exchangers (steam generators) for use in the primary coolant circuit of a nuclear reactor j. Neutron detection and measuring instruments for determining neutron flux levels within the core of a nuclea....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... hot cells Plants for treatment, handling, storage and transportation of radioactive wastes from nuclear reactors or from plants for processing Source Materials or Special Fissionable Materials or from nuclear reprocessing plants; irradiated nuclear fuel; Special Fissionable Materials, and equipment specially designed, prepared, adapted, or intended to be used therefor. All systems, associated equipment, components for separation or enrichment of isotopes of uranium, plutonium, lithium or boron, other than analytical instruments, specially designed, prepared, adapted, used or intended to be used therefor as follows: a. Gas centrifuges and assemblies and components specially designed or prepared for use in gas Centrifuges b. Specially designed or prepared auxiliary systems, equipment and components for gas centrifuge enrichment plants Page 12 of 53 OB006 0B007 OB008 OC Category 1 1A c. Specially designed or prepared assemblies and components for use in gaseous diffusion enrichment d. Specially designed or prepared auxiliary systems, equipment and components for use in gaseous diffusion enrichment e. Specially....
X X X X Extracts X X X X
X X X X Extracts X X X X
...., Et,n-Pr or i-Pr) phosphonofluoridates e.g. Sarin: O-Isopropyl methylphosphonofluoridate Soman: O-Pinacolyl methylphosphonofluoridate (2). O-Alkyl, (≤C10, incl. cycloalkyl) N,N-dialkyl (Me, Et, n-Pr or i-Pr) phosphoramidocyanidates e.g. Tabun: O-Ethyl N,N,-dimethyl phosphoramidocyanidate (3).O-Alkyl (H or ≤ C10, incl. cycloalkyl) S-2-Dialkyl (Me, Et, n-Pr or i-Pr)- aminoethyl alkyl (Me, Et, n-Pr or i-Pr) phosphonothiolates and corresponding alkylated or protonated salts e.g. VX: O-Ethyl S-2 diisopropylaminoethyl methyl phosphonothiolate (4). Sulphur mustards: 2-Chloroethylchloromethylsulphide Mustard gas: Bis (2-chloroethyl) sulphide Bis (2-chloroethylthio) methane Sesquimustard: 1,2-Bis (2-chloroethylthio) ethane 1,3-Bis (2-chloroethylthio)-n-propane 1,4-Bis (2-chloroethylthio)-n-butane 1,5-Bis(2-chloroethylthio)-n-Pentane Bis (2-Chloroethylthiomethyl) ether O-Mustard: Bis (2-Chloroethylthiomethyl) ether (5). Lewisites: Lewisite 1: 2-Chlorovinyldichloroarsine Lewisite 2: Bis (2-Chlorovinyl) chloroarsine Lewisite 3: Tris (2-Chlorovinyl) arsine (6). Nitrogen mustards: HN1: Bis (2-chloroe....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... e.g.Methylphosphonyl dichloride Dimethyl methylphosphonate Exemption:- Fonofos: O-Ethyl S-phenyl ethylphosphonothiolothionate 5. N,N-Dialkyl (ME, Et, n-Pr or i-Pr) phosphoramidic dihalides 6. Dialkyl (Me, Et, n-Pr or i-Pr) N, N-dialkyl (Me, Et, n-Pr or i-Pr)- phosphoramidates 7. Arsenic trichloride 8. 2,2-Diphenyl-2 hydroxyacetic acid 9. Quinuclidine-3-ol Page 15 of 53 10. N‚H-Dialkyl (Me, Et, n-Pr or i-Pr) aminoethyl-2 -chlorides and corresponding protonated salts 11. N, N-Dialkyl (Me, Et, n-Pr or i-Pr) aminoethane-2-ols and corresponding protonated salts Exemptions: N,N-Dimethylaminoethanol and corresponding protonated salts N,N-Diethylaminoethanol and corresponding protonated salts 12. N,N-Dialkyl (Me, Et, n-Pr or i-Pr) aminoethane-2-thiols and corresponding protonated salts 13. Thiodiglycol: Bis(2-hydroxyethyl) sulphide 14. Pinacolyl alcohol: 3,3-Dimethylbutane-2-ol A List of commercially important Schedule-2 Chemicals of CWC is given below: SI. No. Name of Chemical Entry into CAS (Chemical Schedule Abstract ITC(HS) codes Service) Numbers 1. 2. 2-Chloro N,N-Di-i....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... 27. Phosphonous dichloride, methyl- 2B04 676-83-5 29209065 28. Phosphonic acid, ethyl-, diethyl ester 2B04 78-38-6 29209066 29. Arsenous trichloride 2B07 7784-34-1 28121060 30. Benzeneacetic acid, alpha-hydroxy- 2B08 76-93-7 29181910 alpha-phenyl 31. 1-Azabicyclo (2.2.2.) octan-3-ol 2B09 1619-34-7 29333930 32. Ethanamine, 2-Chloro-N, N-dimethyl- 2B10 107-99-3 29211914 33. Ethanol, 2-[bis(1-methylethyl) amino]- 2B11 96-80-0 29221920 34. Ethanethiol, 2-(diethylamino)- 2B12 100-38-9 29221930 35. Ethanol, 2, 2'-thiobis- 2B13 111-48-8 29309091 36. 2-Butanol, 3, 3-dimethyl- 2B14 464-07-3 29051910 1C Export of Chemicals as specified below is allowed to State Parties to the CWC without an export licence subject to the condition that the exporter shall notify within 30 days of export to the National Authority, Chemicals Weapons Convention, Cabinet Secretariat; the Ministry of External Affairs (D&ISA); the Department of Chemicals & Petro-chemicals, and the DGFT of such exports in the prescribed format (Aayat Niryat Form) alon....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... Leptospira interrogans - all serotypes reported in India Mycobacterium bovis Mycobacterium tuberculosis Mycoplasma mycoides - var mycoides Mycoplasma mycoides - var Capri 2A018 Neisseria meningitidis 2A019 Paseturella multicoda type B 2A020 2A021 2A022 2A023 Shigella dysenteriae 2A024 2A025 Pseudomonas mallei Pseudomonas pseudomallei Salmonella paratyphi Staphylococcus aureus Streptococcus pneumoniae 2A026 Vibrio cholerae elter 2A027 2A028 Vibrio Cholerae 0139 Yersinia pestis 2B Fungi, whether natural, enhanced or modified, either in the form of isolated live cultures or as material including living material which has been deliberately inoculated or contaminated with such cultures for the following: Page 18 of 53 2B001 Blastomyces dermatitidis 2B002 Coccidiodes immitis 2B003 2B004 2B005 2C 2C001 Histoplasma capulatum Nocardia asteroides Paracoccidioides braziliensis Parasites, whether natural, enhanced or modified, either in the form of isolated live cultures or as material including living material which has been deliberately inoculated or co....
X X X X Extracts X X X X
X X X X Extracts X X X X
....043 Sin Nombre virus 2D044 2D045 2D046 2D047 2D048 2D049 2D050 Smallpox virus St.Louis encephalitis virus Swine Fever virus Tick-borne encephalitis virus (Russian Spring Summer Encephalitis virus) Teschen disease virus (Porcine entero virus type 1) Variola virus Venezuelan encephalitis virus 2D051 Vesicular stomatitis virus 2D052 Western encephalitis virus 2D053 2E Yellow fever virus, 17 D vaccine strain Rickettsials, whether natural, enhanced or modified, either in the form of isolated live cultures or as material including living material which has been deliberately inoculated or contaminated with such cultures for the following: Coxiella burnetti Rickettsiae rickettsii 2E001 2E002 2E003 Rickettsia quintana 2E004 Rickettsia prowazebi 2F Toxins 2F001 Abrins 2F002 Aflatoxins 2F003 Anatoxins 2F004 2F005 Botulinum toxin (s) (clostradium botulinum) Bungarotoxins 2F006 2F007 2F008 Clostridium perfringens toxins Corynebacterium diphtheriae toxins Cyanginosins (Microcystins) (Microcystic aeuginosa) Page 20 of 53 2F009 2F010 E....
X X X X Extracts X X X X
X X X X Extracts X X X X
....anium alloys including Titanium-stabilised Duplex Stainless Steel (Ti-DSS) (other than as specified at 0A307) Aluminium alloys in any form ‘capable of acquiring' an ultimate tensile strength of 460 MPa or more at 293 K (20 degrees C) Note: The phrase 'capable of acquiring' encompasses alloys before or after heat treatment Bismuth having a purity of 99.99% or greater by weight and containing less than 10 parts per million by weight of silver Calcium containing less than 1000 parts per million by weight of metallic impurities other than magnesium and containing less than 10 parts per million by weight of Boron Chlorine trifluoride (CIF3) Magnesium containing less than 200 parts per million by weight of metallic impurities other than calcium and containing less than 10 parts per million by weight of boron (a) Tungsten, tungsten carbide, and alloys containing more than 90% tungsten by weight in forms with a hollow cylindrical symmetry (including cylinder segments) with an inside diameter between 100 and 300 mm and a mass greater than 20 kg. (b) Tungsten materials in the solid form usable for the fabrication of missile co....
X X X X Extracts X X X X
X X X X Extracts X X X X
....e launch vehicles and sounding rockets), unmanned aerial vehicles and cruise missiles; c. Fine grain re-crystalised bulk graphites and pyrolytic or fibrous reinforced graphites usable for rocket nozzles and re-entry vehicles nose tips; d. Ceramic composite materials (dielectric constant less than 6 at any frequency from 100 MHz to 100 GHz) for use in missile radomes; e. Materials and coatings for reduced radar reflectivity; f. Bulk machinable silicon-carbide reinforced unfired ceramic usable in re- entry vehicles nose tips. g. Reinforced silicon-carbide ceramic composites usable for nose tips, re-entry vehicles, nozzle flaps, usable in complete rocket systems of 5A and complete unmanned aerial vehicles of 5B. Page 23 of 53 3A3 3A301 3A302 3A303 3A304 3A305 3A306 3A307 3A308 Rocket propellants and constituent chemicals: Propulsive substances - Hydrazine (CAS-302-01)and its derivatives usable as rocket fuel substances including Monomethylhydrazine (MMH)(CAS 60-34), Unsymmetrical di-methyl hydrazine (UDMH), (CAS 57-14-7)Hydrazine nitrate, (except aromatic hydrazines and their salts, adipic acid dihydrazid....
X X X X Extracts X X X X
X X X X Extracts X X X X
....e (CAS 31904-29-7); 5. Pentyl ferrocene (CAS 1274-00-6); 6. Dicyclopentyl ferrocene (CAS 20773-28-8); 7. Dicyclohexyl ferrocene; 8. Diethyl ferrocene; 9. Dipropyl ferrocene; 10. Dibutyl ferrocene (CAS 1274-08-4); 11. Dihexyl ferrocene (CAS 93894-59-8); 12. Acetyl ferrocenes; 13. Ferrocene Carboxylic acids; 14. Butacene; C. Other ferrocene derivatives usable as rocket propellant burning rate modifiers. Nitrate esters and nitrated plasticisers as follows: a. Triethylene glycol dinitrate (TEGDN); b. Trimethylolethane trinitrate (TMETN)(CAS 3032-55-1); c. 1,2,4-butanetriol trinitrate (BTTN)(CAS 6659-60-5); d. Diethylene glycol dinitrate (DEGDN); e. 4,5 diazidomethyl-2-methyl-1,2,3-triazole (iso-DAMTR); f. Nitratoethylnitramine (NENA) based plasticisers, as follows: 1. Methyl-NENA (CAS 17096-47-8); 2. Ethyl-NENA (CAS 85068-73-1); 3. Butyl-NENA (CAS 82486-82-6); g. Dinitropropyl based plasticisers, as follows: 1. Bis (2,2-dinitropropyl) acetal (BDNPA) (CAS 5108-69-0); 2. Bis (2,2-dinitropropyl) formal (BDNPF) (CAS 5917-61-3). Stabilisers as follows: a. 2-Nitrodiphenylamine (CAS 119-75-5); b. N-methyl-p-ni....
X X X X Extracts X X X X
X X X X Extracts X X X X
....position furnaces designed or modified for the densification of carbon-carbon composites. Pyrolytic deposition and densification equipment including: a. Technology for producing pyrolytically derived materials formed on a mould, mandrel or other substrate from precursor gases. b. Specially designed nozzles for the above process. c. Equipment and process controls and specially designated software thereof, specially designed or modified for densification and pyrolysis of structural composite rocket nozzles and re-entry vehicle nose tips. Production equipment usable for or specially designed or modified for production, handling, mixing, curing, casting, pressing, machining, extruding or acceptance testing of the solid or liquid rocket propellants or rocket propellant constituents and related technology. Page 26 of 53 3B008 Refrigeration units and equipment capable of cooling hydrogen or helium to -250 degrees Celsius (23K) or lower. 3B009 Continuous nitrators. 3B010 3B011 3B012 3B013 3B014 3B015 3B016 3B017 3B018 3B019 3B020 3C 3D 3D001 Dehydration presses. Screw extruders usable for ....
X X X X Extracts X X X X
X X X X Extracts X X X X
..... Ferrosilicon Note: 3D001 does not control the following items: Category 4 4A a. Open vessels fabricated from glass sheets (such as aquariums, water tanks etc.); or cookware, table-ware, decorative glass or ceramic items (such as vases, art objects, etc.) b. Glass-ware (whether or not metal-jacketed) or glass-lined reaction vessels or reactors, whether or not equipped with agitators, provided that the total internal (geometric) volume of each vessel or reactor is greater than 20,000 litres (20 m3) or less than or equal to 100 litres (0.1 m3). Examples of the latter capacity glass or ceramic-ware include standard laboratory equipment such as test tubes, flasks, retorts etc. Incinerators designed to destroy any chemicals specified in Category 1. Combustors or pyrolysers capable of a heat-zone ('burner') temperature greater than 1,273 K (1000 Degree Centigrade), and in which any surfaces that come into direct contact with material coming into the containing chamber are made from, or lined with, any of the following materials: a. Alloys with more than 25% nickel and 25% chromium by weight; (e.g., 'Hatelloy', 'Illium', ‘Inc....
X X X X Extracts X X X X
X X X X Extracts X X X X
....tions available better (less) than 6 µm along any linear axis (overall positioning); or 2. Two or more contouring rotary axes; Note: Item 4A002b does not control milling machines having both of the following characteristics: C. 1. X-axis travel greater than 2 m; and 2. Overall positioning accuracy on the x-axis worse (more) than 30 µm. Machine tools for grinding, having any of the following characteristics: 1. Positioning accuracies with all compensations available better (less) than 4 μm along any linear axis (overall positioning); or 2. Two or more contouring rotary axes; Note: Item 4A002c does not control grinding machines as follows: 1. Cylindrical external, internal, and external-internal grinding machines having all the following characteristics: a. Limited to cylindrical grinding; b. A maximum work-piece outside diameter or length of 150 mm; c. Not more than two axes that can be coordinated simultaneously for contouring control; and d. No contouring c-axis; Page 29 of 53 2. Jig grinders with axes limited to x, y, c, and a, where c-axis is used to maintain the grinding wheel normal to the work surface,....
X X X X Extracts X X X X
X X X X Extracts X X X X
....hines having both of the following characteristics: 1. Two or more axes; and 2. A one-dimensional length measurement uncertainty equal to or better (less) than (1.25 + L/1000) µm tested with a probe of an accuracy of Page 30 of 53 better (less) than 0.2 µm (L is the measured length in millimetres); b. 'Linear displacement' measuring instruments, as follows: 1. Non-contact type measuring systems with a resolution equal to or better (less) than 0.2 μm within a measuring range up to 0.2 mm; 2. Linear variable differential transformer (LVDT) systems having both of the following characteristics: a. Linearity equal to or better (less) than 0.1% within a measuring range up to 5 mm; and b. Drift equal to or better (less) than 0.1% per day at a standard ambient test room temperature ± 1 K; 3. Measuring systems having both of the following characteristics: a. Contain a laser; and b. Maintain for at least 12 hours, over a temperature range of ± 1 K around a standard temperature and a standard pressure: 1. A resolution over their full scale of 0.1 μm or better; and 2. With a measurement uncertainty equal to or bet....
X X X X Extracts X X X X
X X X X Extracts X X X X
....uipment capable of pressurizing a closed cavity through various media (gas, liquid, solid particles, etc.) to create equal pressure in all directions within the cavity upon a work piece or material. 2. In Item 4A005 the inside chamber dimension is that of the chamber in which both the working temperature and the working pressure are achieved and does not include fixtures. That dimension will be the smaller of either the inside diameter of the pressure chamber or the inside diameter of the insulated furnace chamber, depending on which of the two chambers is located inside the other. Vibration test systems, equipment, and components as follows: a. Electrodynamic vibration test systems, having all of the following characteristics: 1. Employing feedback or closed loop control techniques and incorporating a digital control unit; 2. Capable of vibrating at 10 g RMS or more between 20 and 2000 Hz; and 3. Capable of imparting forces of 50 kN or greater measured ‘bare table’; b. Digital control units, combined with software specially designed for vibration testing, with a real-time bandwidth greater than 5 kHz and being desi....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... c. Crucibles having all of the following characteristics: 1. A volume of between 50 cm3 (50 ml) and 2000 cm3 (2 litres); 2. Made of or lined with tantalum, having a purity of 98% or greater by weight; and 3. Coated with tantalum carbide, nitride, boride, or any combination thereof. Platinized catalysts specially designed or prepared for promoting the hydrogen isotope exchange reaction between hydrogen and water for the recovery of tritium from heavy water or for the production of heavy water. Composite structures in the form of tubes having both of the following characteristics: a. An inside diameter of between 75 and 400 mm; and b. Made with any of the materials specified in Item 3A116. Page 33 of 53 4A011 Frequency changers or generators having all of the following characteristics: a. Multiphase output capable of providing a power of 40 W or greater; b. Capable of operating in the frequency range between 600 and 2000 Hz; c. Total harmonic distortion better (less) than 10%; and d. Frequency control better (less) than 0.1%. Note: Frequency changers and generators especially designed or prepared for the gas centrifug....
X X X X Extracts X X X X
X X X X Extracts X X X X
....idth of less than 200 ns; Note: Item 4A012g does not control the higher power (typically 1 to 5 1kW) industrial CO2 lasers used in applications such as cutting and welding, as these latter lasers are either continuous wave or are pulsed with a pulse width greater than 200 ns. h. Pulsed excimer lasers (XeF, XeCl, KrF) having all of the following characteristics: 1. Operating at wavelengths between 240 and 360 nm; 2. A repetition rate greater than 250 Hz; and 3. An average output power greater than 500 W; i. Para-hydrogen Raman shifters designed to operate at 16 μm output wavelength and at a repetition rate greater than 250 Hz. Valves having all of the following characteristics: a. A nominal size of 5 mm or greater; b. Having a bellows seal; and c. Wholly made of or lined with aluminium, aluminium alloy, nickel, or nickel alloy containing more than 60% nickel by weight. Technical Note: For valves with different inlet and outlet diameter, the nominal size parameter in Item 4A013a refers to the smallest diameter. Superconducting solenoidal electromagnets having all of the following characteristics: a. Capable of cr....
X X X X Extracts X X X X
X X X X Extracts X X X X
....is determined at the measurement point with nitrogen gas or air. 2. The ultimate vacuum is determined at the input of the pump with the input of the pump blocked off. Electrolytic cells for fluorine production with an output capacity greater than 250 g of fluorine per hour. Rotor fabrication or assembly equipment, rotor straightening equipment, bellows- forming mandrels and dies, as follows: Page 36 of 53 4A021 4A022 a. Rotor assembly equipment for assembly of gas centrifuge rotor tube sections, baffles, and end caps; Note: Item 4A020a includes precision mandrels, clamps, and shrink fit machines. b. Rotor straightening equipment for alignment of gas centrifuge rotor tube sections to a common axis; Technical Note: In Item 4A020b such equipment normally consists of precision measuring probes linked to a computer that subsequently controls the action of, for example, pneumatic rams used for aligning the rotor tube sections. c. Bellows-forming mandrels and dies for producing single -convolution bellows. Technical Note: The bellows referred to in Item 4A020c have all of the following characteristics: 1. Inside diame....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ources therefor: a. Inductively coupled plasma mass spectrometers (ICP/MS); b. Glow discharge mass spectrometers (GDMS); c. Thermal ionisation mass spectrometers (TIMS); d. Electron bombardment mass spectrometers which have a source chamber constructed from, lined with or plated with materials resistant to UF6; e. Molecular beam mass spectrometers having either of the following characteristics: 1. A source chamber constructed from, lined with or plated with stainless steel or molybdenum, and equipped with a cold trap capable of cooling to 193 K (-80 °C) or less; or 2. A source chamber constructed from, lined with or plated with materials resistant to UF6; f. Mass spectrometers equipped with a micro-fluorination ion source designed for actinides or actinide fluorides. Note: Mass spectrometers especially designed or prepared for analyzing on-line samples of uranium hexafluoride are controlled under Prescribed Equipment (OB Category). Specialized packings which may be used in separating heavy water from ordinary water, having both of the following characteristics: a. Made of phosphor bronze mesh chemically treated to impro....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... which are both cryogenic and H2-compatible; and d. With internal diameters of 1 m or greater and effective lengths of 5 m or greater. Ammonia synthesis converters or synthesis units, in which the synthesis gas (nitrogen and hydrogen) is withdrawn from an ammonia/hydrogen high-pressure exchange column and the synthesized ammonia is returned to said column. Page 39 of 53 4B 4B001 4B002 4B003 4B004 Equipment, assemblies and components, including test and measurement equipment usable in development of nuclear explosive devices Photomultiplier tubes having both of the following characteristics: a. Photocathode area of greater than 20 cm²; and b. Anode pulse rise time of less than 1 ns. Flash X-ray generators or pulsed electron accelerators having either of the following sets of characteristics: a. An accelerator peak electron energy of 500 keV or greater but less than 25 MeV; and b. With a figure of merit (K) of 0.25 or greater; or a. An accelerator peak electron energy of 25 MeV or greater; and b. A peak power greater than 50 MW. Note: Item 4B002 does not control accelerators that are component parts of d....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... deposited on a transparent conductive coating to decrease photocathode sheet resistance; 2. Gate silicon intensifier target (SIT) vidicon tubes, where a fast system allows gating the photoelectrons from the photocathode before they impinge on the SIT plate; 3. Kerr or Pockels cell electro-optical shuttering; 4. Other framing tubes and solid-state imaging devices having a fast image gating time of less than 50 ns specially designed for cameras specified in Item 4B005c. Specialized instrumentation for hydrodynamic experiments, as follows: a. Velocity interferometers for measuring velocities exceeding 1 km/s during time intervals of less than 10 μs; b. Manganin gauges for pressures greater than 10 GPa; c. Quartz pressure transducers for pressures greater than 10 GPa. Note: Item 4B006a includes velocity interferometers such as VISARS (Velocity interferometer systems for any reflector) and DLIS (Doppler laser interferometers). High-speed pulse generators having both of the following characteristics: a. Output voltage greater than 6 V into a resistive load of less than 55 ohms; and b. 'Pulse transition time' less than 500 ps....
X X X X Extracts X X X X
X X X X Extracts X X X X
....able for aerospace applications. Note: Item 4B009b includes xenon flashlamp drivers. Technical Note: In Item 4B009b5 'rise time' is defined as the time interval from 10% to 90% current amplitude when driving a resistive load. Switching devices as follows: a. Cold-cathode tubes, whether gas filled or not, operating similarly to a spark gap, having all of the following characteristics: 1. Containing three or more electrodes; 2. Anode peak voltage rating of 2.5 kV or more; 3. Anode peak current rating of 100 A or more; and 4. Anode delay time of 10 μs or less; Note: Item 4B010a includes gas krytron tubes and vacuum sprytron tubes. Page 42 of 53 4B011 b. Triggered spark-gaps having both of the following characteristics: 1. Anode delay time of 15 µs or less; and 2. Rated for a peak current of 500 A or more; c. Modules or assemblies with a fast switching function having all of the following characteristics: 1. Anode peak voltage rating greater than 2 kV; 2. Anode peak current rating of 500 A or more; and 3. Turn-on time of 1 μs or less. Pulse discharge capacitors having either of the following sets of characterist....
X X X X Extracts X X X X
X X X X Extracts X X X X
....thods of achieving thrust vector control such as flexible nozzle, fluid or secondary gas injection, movable engine or nozzle, deflection of exhaust gas stream (jet vanes or probes) and use of thrust tabs; g. hybrid rocket motors and components thereof; h. safing, arming, fusing and firing mechanisms for weapons or warhead; i. software specially designed for reduced observables such as radar reflectivity, ultraviolet/infrared signatures and acoustic signatures. Production and Test Equipment Transonic, supersonic, hypersonic wind tunnels; shock tunnels; gun tunnels; aeroballistic ranges. Test and production equipment and facilities designed to handle systems in 5A1. Test benches/stands, usable for complete rocket systems and subsystems (including ballistic missile systems, space launch vehicles and sounding rockets) which have the capacity to handle solid or liquid propellant rockets, motors or engines, or which are capable of simultaneously measuring the three axial thrust components. Vibration test equipment (vibration test systems and vibration thrusters) and components using digital control techniques and feedback or closed lo....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ks specially designed for the propellants controlled in Item 3A3 or other liquid propellants used in the systems specified in 5A and 5B. Production facilities and production equipment specially designed for equipment or materials for 5A101 and 5A102. Production equipment and specially designed components thereof, for the production, handling or acceptance testing of liquid propellants or propellant constituents as referred in 3A3; Launch and ground support equipment and facilities usable for rocket systems (including ballistic missile systems, space launch vehicles and sounding rockets), unmanned airborne system and cruise missiles as follows:- Page 45 of 53 5A218 5A3 5A301 5A302 5A303 a. apparatus, devices and vehicles, designed or modified for the transport, handling, control, activation and launching of the systems. b. gravity meters (gravimeters), gravity gradiometers, and specially designed components thereof, designed or modified for airborne or marine use usable for complete rocket systems and for complete unmanned aerial vehicle systems (including cruise missile systems target drones and reconnaissance drones....
X X X X Extracts X X X X
X X X X Extracts X X X X
....s, target drones and reconnaissance drones); i e. Light weight Turbojet and turbofan engines (including turbo compound engines);. f. Ramjet / Scramjet / pulse jet/ combined cycle engines, including devices to regulate combustion, and specially designed components; g. Complete unmanned aerial vehicle systems having an autonomous flight control and navigation capability or capability of controlled flight out of the direct vision range involving a human operator, designed or modified to incorporate an aerosol dispensation mechanism, or capable of carrying elements of a payload in the form of a particulate or liquid other than fuel components of such vehicles; Note: This category does not control unpowered airborne vehicles such as gliders, hot air balloons etc.; h. Safing, arming, fusing and firing mechanisms for weapons or warhead; Production facilities and Production equipment specially designed for equipment or materials for 5;. j. Technology, for the development, production or use of equipment, materials or software specified for 5B; k. Software, for the development, production or use of equipment or materials speci....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ty, either periodically or continuously throughout the flight (example: satellite navigation receiver, radar altimeter and/or Doppler radar); integration hardware and software. 2. Three axis magnetic heading sensors having all of the following characteristics, and specially designed components therefor: a. Internal tilt compensation in pitch (+/- 90 degrees) and having roll (+/- 180 degrees) axes. b. Capable of providing azimuthal accuracy better (less) than 0.5 degrees rms at latitudes of +/- 80 degrees, referenced to local magnetic field; and c. Designed or modified to be integrated with flight control and navigation systems. Note: Flight control and navigation systems in this item include gyrostabilizers, automatic pilots and inertial navigation systems. Production equipment and other test, calibration and alignment equipment, designed or modified to be used with equipment specified in 5C001 - 5C004 and 5C007. Equipment used to characterize mirrors for laser gyros such as scatterometer, reflectometer and profilometer and for other inertial equipments such as Inertial measurement unit (IMU Module) tester, IMU Platform tester, ....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... or unmanned aerial vehicle in conjunction with either surface or airborne references or navigation satellite systems to provide real-time measurement of inflight position and velocity; Range instrumentation radars including associated optical/infrared trackers and related software. Balancing machines capable of balancing rotors/assemblies and correcting unbalance in two planes or more. Indicator heads or balancing instrumentation designed or modified for use with balancing machines. Page 49 of 53 5C017 5C018 5C019 5C020 5C021 Motion simulators or rate tables having all of the following characteristics: a. Two axes or more; b. Designed or modified to incorporate slip rings or integrated non-contact devices capable of transferring electrical power, signal information, or both; and c. Having any of the following characteristics: 1. For any single axis having all of the following: a. Capable of rates of 400 degrees/s or more, or 30 degrees/s or less; and b. A rate resolution equal to or less than 6 degrees/s and an accuracy equal to or less than 0.6 degrees/s; 2. Having a worst-case rate stability equal to or bett....
X X X X Extracts X X X X
X X X X Extracts X X X X
....r modified for military use, and specially designed components thereof; c. Airborne equipment, including airborne refuelling equipment, specially designed for use with the aircraft controlled by 5D001a or 5D001b or the aero-engines controlled by 5D001c, and specially designed components thereof; d. Pressure refuellers, pressure refuelling equipment, equipment specially designed to facilitate operations in confined areas and ground equipment, developed specially for aircraft controlled by 5D001a or 5D001b or for aero- engines controlled by 5D001c; e. Pressurized breathing equipment and partial pressure suits for use in aircraft anti-g suits, military crash helmets and protective masks, liquid oxygen converters used for aircraft or missiles, and catapults and cartridge actuated devices for emergency escape of personnel from aircraft; f. Parachutes: 1. Paragliders, drag parachutes, drogue parachutes for stabilization and attitude control of dropping bodies, (e.g. recovery capsules, ejection seats, bombs); 2. Drogue parachutes for use with ejection seat systems for deployment and inflation sequence regulation of emergency parachu....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ipment in which the integrated circuit will be used is unknown, Fast Fourier Transform (FFT) processors, electrical erasable programmable read-only memories (EEPROMs), flash memories or static random-access memories (SRAMS), having any of the following: a. Rated for operation at an ambient temperature above 398 K (+125°C); b. Rated for operation at an ambient temperature below (-55°C); or 218 K c. Rated for operation over the entire ambient temperature range from 218 K (- 55°C) to 398 K (+125°C). Radiation-hardened analogue-to-digital and digital-to-analogue converter integrated circuits, as follows: a. Analogue-to-digital converters having any of the following: 1. A resolution of 8 bit or more, but less than 12 bit, with a total conversion time of less than 5 ns; 2. A resolution of 12 bit with a total conversion time of less than 200 ns; or 3. A resolution of more than 12 bit with a total conversion time of less than 2 μs; b. Digital-to-analogue converters with a resolution of 12 bit or more, and a settling time of less than 10 ns. Detector units operating in the thermal infrared, ultraviolet, x-ray and gam....