TaxTMI 
TaxTMI 
Amended in 2010 shall apply to the goods, services and technologies specified in the Annexure.
X X X X Extracts X X X X
X X X X Extracts X X X X
....l apply to the goods, services and technologies specified in the Annexure. 2. Annexure to this notification will replace the existing 'Appendix 3' to Schedule- 2 of ITC (HS) Classifications of Export and Import Items, 2009-14. 3. Purpose of the notification: The FT(D&R) Act,1992 was amended in 2010. By this amendment, a new Chapter IV A has been introduced in the FT(D&R) Act,1992. It deals with controls on export of specified goods, services and technologies and empowers the Central Government to notify list of such goods, services and technologies. This notification lists the goods, services and technologies to which provisions of Chapter IV A of the FT (D&R) Act, 1992 as amended in 2010 shall apply. 'Appendix 3' to Schedule 2 of ITC (HS) Classifications of Export and Import Items, popularly known as SCOMET List, would accordingly be replaced by this list. (Anup K. Pujari) Director General of Foreign Trade [email protected] Phone : 23063436, 23062777 (Issued from File No. 01/91/171/14/AM-11/Export Cell) Annexure to Notification No. 38 Dated 31st March, 2011 APPENDIX-3 Special Chemicals, Organisms, Materials, E....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ng (helicopter), tilt rotor or tilt-wing airborne vehicle. "Angular position deviation" means the maximum difference between angular position and the actual, very accurately measured angular position after the work piece mount of the table has been turned out of its initial position. "Composite" means a "matrix" and an additional phase or additional phases consisting of particles, whiskers, fibres or any combination thereof, present for a specific purpose or purposes. "Composite theoretical performance" ("CTP") is a measure of computational performance given in millions of theoretical operations per second (Mtops), calculated using the aggregation of computing elements (CE). "Contouring control" means two or more "numerically controlled" motions operating in accordance with instructions that specify the next required position and the required feed rates to that position. These feed rates are varied in relation to each other so that a desired contour is generated. "CTP" is equivalent to "composite theoretical performance "Designed or modified" describes equipment, parts or components which, as a result of "development," or modification, have become endo....
X X X X Extracts X X X X
X X X X Extracts X X X X
....n against compromising emanations and computer security. N.B.: 'Cryptanalysis': analysis of a cryptographic system or its inputs and outputs to derive confidential variables or sensitive data, including clear text. "Insulation" is applied to the components of a rocket motor, i.e. the case, nozzle, inlets, case closures, and includes cured or semi-cured compounded rubber sheet stock containing an insulating or refractory material. It may also be incorporated as stress relief boots or flaps. "Interior lining" is suited for the bond interface between the solid propellant and the case or insulating liner. Usually a liquid polymer based dispersion of refractory or insulating materials, e.g. carbon filled hydroxyl terminated polybutadiene (HTPB) or other polymer with added curing agents sprayed or screeded over a case interior. "Isolated live cultures" includes live cultures in dormant form and in dried preparations. "Isostatic presses" mean equipment capable of pressurising a closed cavity through various media (gas, liquid, solid particles, etc.) to create equal pressure in all directions within the cavity upon a workpiece or material. "Laser": An assembly....
X X X X Extracts X X X X
X X X X Extracts X X X X
....which is distinguished by its hardware capability to modulate the weights and numbers of the interconnections of a multiplicity of computational components based on previous data. "Numerical control" means the automatic control of a process performed by a device that makes use of numeric data usually introduced as the operation is in progress. "Optical integrated circuit" means a "monolithic integrated circuit" or a hybrid integrated circuit, containing one or more parts designed to function as a photo sensor or photo emitter or to perform (an) optical or (an) electro-optical function(s). "Precursors": Speciality chemicals used in the manufacture of explosives. "Pressure transducers" are devices that convert pressure measurements into an electrical signal. "Production" means all production stages (e.g., product engineering, manufacture, integration, assembly (mounting), inspection, testing, quality assurance); "Production equipment": Tooling, templates, jigs, mandrels, moulds, dies, fixtures, alignment mechanisms, test equipment, other machinery and components therefor, limited to those specially designed or modified for "development" or for one or mor....
X X X X Extracts X X X X
X X X X Extracts X X X X
....e-counter transactions; 2. Mail order transactions; or 3. Telephone call transactions; and b. Designed for installation by the user without further substantial support by the supplier. "Space qualified": Products designed, manufactured and tested to meet the special electrical, mechanical or environmental requirements for use in the launch and deployment of satellites or high altitude flight systems operating at altitudes of 100 km or higher. "Stability" means the standard deviation (1 sigma) of the variation of a particular parameter from its calibrated value measured under stable temperature conditions. This can be expressed as a function of time. "Specially designed" qualifies the description of equipment, parts, components or "software" which, as a result of "development", have unique properties that distinguish them for certain predetermined purposes. For example, a piece of equipment that is "specially designed" will only be considered so if it has no other function or use. Thus a piece of manufacturing equipment that is "specially designed" to produce a certain type of component will only be considered such if it is not capable of producing other types of c....
X X X X Extracts X X X X
X X X X Extracts X X X X
....disease in those to whom or to which it is administered. "Yarn" is a bundle of twisted 'strands' N.B.: 'Strand' is a bundle of "monofilaments" (typically over 200) arranged approximately parallel. Items on the SCOMET List are organized in the following categories. Category 0 Nuclear materials, nuclear-related other materials, equipment and technology 0A Prescribed Substances 0A1 Source Material 0A2 Special Fissionable Material 0A3 Other Materials 0B Prescribed Equipment 0C Technolo....
X X X X Extracts X X X X
X X X X Extracts X X X X
....nbsp; High explosives 3A5 Stealth materials 3B Materials processing and production equipment, related technology and specially designed components and accessories therefor. 3C [Reserved] 3D Chemical and biomaterial manufacturing and handling equipment and facilities Category 4 Nuclear-related other equipment and technology, not controlled under Category 0 4A Equipment, assemblies, components including test and production equipment 4B &n....
X X X X Extracts X X X X
X X X X Extracts X X X X
....bsp; [Reserved] Category 0 Nuclear materials, nuclear-related other materials, equipment and technology Note: Export of these items is regulated under the Atomic Energy Act, 1962 and rules framed, and notifications/orders issued thereunder from time-to-time by the Department of Atomic Energy. The licensing authority for items in this category is the Department of Atomic Energy. An application for licences to export prescribed equipment or/an prescribed substances shall be made in writing to the Joint Secretary, Department of Atomic Energy, Anushakti Bhavan, CSM Marg, Mumbai 400 001. 0A Prescribed Substances Note: Any radioactive material in Category 0A shall additionally attract the provisions of Radiation Protection Rules, 2004 made under the Atomic Energy Act, 1962 and the provisions of Section-16 of the Atomic Energy Act, 1962. 0A1 Source Material 0A101 Uranium containing the mixture of isotopes ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....mpound, in which the ratio of deuterium to hydrogen atoms exceeds 1:5000, in quantities exceeding 5 kilograms of deuterium in one consignment or 25 kilograms of deuterium in any period of 12 months. 0A302 Nuclear grade graphite / carbon, having a purity level better than 5 parts per million (ppm) boron equivalent and with a density greater than 1.5 gram/cc in quantities exceeding 30 metric tons in any period of 12 months. 0A303 Zirconium with hafnium content of less than 1 part to 500 parts of zirconium by weight (i.e. less than 2000 ppm) in the form of metal, its alloys, compounds, manufactures thereof, waste or scrap of any of the foregoing. 0A304 Beryllium, its compounds, alloys and its minerals / concentrates including Beryl but excluding: a. beryllium windows used for x-ray machines and gamma ray detectors and b. beryl in the form of emeralds or aquamarines. 0A305 &....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... Helium-3 Helium-3 (3He), mixtures containing helium-3, and products or devices containing any of the foregoing. Note: A product or device containing less than 1gm of Helium-3 is excluded. 0A313 Alpha-emitting radionuclides: Alpha-emitting radionuclides having an alpha half-life of 10 days or greater but less than 200 years, in the following forms: a. Elemental; b. Compounds having a total alpha activity of 37 GBq per kg or greater; c. Mixtures having a total alpha activity of 37 GBq per kg or greater; d. Products or devices containing any of the foregoing. Alpha emitters controlled by this item include: Actinium-225 Actinium-227 Americium-242m Californium-248 Californium-250 Californium-252 Californium-253 Californium-254 Curium-240 Curium-241 Curium-242 Curium-243 Curium244 Einsteinium-252 Einsteini....
X X X X Extracts X X X X
X X X X Extracts X X X X
....or equal to 3 MPa 6. Infrared Absorption Analyzers capable of 'on-line' hydrogen/ deuterium ratio analysis 7. Catalytic Burners for conversion of enriched deuterium gas into heavy water 8. Complete heavy water upgrade systems or columns therefor b. Plants for the conversion of uranium c. Plants for the conversion of plutonium d. Tritium facilities or plants, and equipment therefor e. Lithium isotope separation facilities or plants, and equipment therefor 0B003 Plants for reprocessing of irradiated nuclear fuel and equipment, components and systems specially designed, prepared or adapted or used or intended to be used in such plants, including but not limited to: a. Irradiated fuel element chopping machines designed for remote operation b. Dissolvers capable of withstanding hot and highly corrosive liquid for dissolution of irradiated nuclear fuel and which can be remotely loaded and maintained c. Solvent extractors and solvent extraction equipment resistant to ....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... plasma separation enrichment plants. i. Specially designed or prepared systems, equipment and components for use in electromagnetic enrichment plants. 0B006 Plants for the fabrication of nuclear reactor fuel elements, and equipment specially designed or prepared therefor including but not limited to: a. fully automatic pellet inspection stations specially designed or prepared for checking final dimensions and surface defects of the fuel pellets; b. automatic welding machines specially designed or prepared for welding end caps onto the fuel pins (or rods); c. automatic test and inspection stations specially designed or prepared for checking the integrity of completed fuel pins (or rods). Item 'c' typically includes equipment for: 1) x-ray examination of pin (or rod) end cap welds, 2) helium leak detection from pressurized pins (or rods), and 3) gamma-ray scanning of the pins (or rods) to check for correct loading of the fuel pellets inside. 0B007 Plants or systems fo....
X X X X Extracts X X X X
X X X X Extracts X X X X
....l) arsine (6). Nitrogen mustards: HN1: Bis (2-chloroethyl) ethylamine HN2: Bis (2-chloroethyl) Chloroarsine HN3: Tris (2-chloroethyl) amine (7). Saxitoxin (8). Ricin (9). Alkyl (Me, Et, n-Pr or I-Pr) phosphonyldifluorides e.g. DF: Methyl phosphonyldifluoride (10).O-Alkyl (H or < C10, incl. cycloalkyl) O-2 dialkyl (Me, Et, n-Pr or i-Pr)-aminoethylalkyl (Me, Et N-Pr or i-Pr) phosphonites and corresponding alkylated or protonated salts e.g.QL: O-Ethyl O-2-diisopropylaminoethyl methyl phosphonite (11).Chlorosarin: O-Isopropyl methylphosphonochloridate (12).Chlorosoman: O-Pinacolyl methylphosphonochloridate 1B Export of chemicals listed in 1B below is permitted only to States party to the Chemical Weapons Convention (This corresponds to Schedule 2 to the Chemicals Weapons Convention) Note to exporter: (a) A list of States Parties can be obtained from the Disarmament & International Security Affairs Division of the Ministry of External Affairs (Room No. 40G, South Block, New Delhi) or at the official website of the Organization for t....
X X X X Extracts X X X X
X X X X Extracts X X X X
....t Schedule-2 Chemicals of CWC is given below : Sl. No. Name of Chemical Entry into Schedule CAS (Chemical Abstract Service) Numbers ITC(HS) codes 1. 2-Chloro N, N-Di-isopropyl ethylamine 2B10 4261-68-1 29211911 2. Diethyl amino Ethanethiol 2B12 100-38-9 29221910 3. O, O, Dimethyl Methyl Phosphonate 2B04 756-79-6 29209045 4. 2-Hydroxy N, N-Diisopropyl Ethylamine 2B11 96-80-0 29221111 5. N, N-Diethyl Amino ethyl Chloride Hydrochloride 2B10 869-24-9 29221112 6. Di-ethyl Amino ethanethiol Hydrochloride 2B12 1942-52-5 29221113 7. Di-Methyl Amino ethyl chloride Hydrochloride 2B10 4584-46-7 29221114 8. Di-Methyl Amino ethanethiol 2B12 108-02-1 29221115 9. Di-Methyl Amino ethanethiol Hydrochloride 2B12 13242-44-9 29221116 10. Phosphorothioic acid, S [2-(diethylamino) ethyl] O, O - diethyl ester 2A01 78-53-5 29201910 11. 1-Propene, 1,1, 3, 3, 3, - Pentafluoro - 2- (trifluoromethyl) (PFIB) 2A02 382-21-8 29033911 12. Benzeneacetic acid, alphahydroxy - alpha-phenyl, 1 - azabicyclo [2.2.2.] oct-3-yl ester 2A0....
X X X X Extracts X X X X
X X X X Extracts X X X X
....(D&ISA); the Department of Chemicals & Petro-chemicals, and the DGFT of such exports in the prescribed format (Aayat Niryat Form ) along with the End-Use Certificate and submit to the DGFT a copy of the bill of entry into the destination State Party within 30 days of delivery. Export of chemicals as specified below to states not party to the Chemical Weapons Convention shall continue to be restricted and will be allowed only against an export licence, and in that case also exporters shall submit to the DGFT a copy of the bill of entry into the destination country within 30 days of export. Sl.No. Name of Chemical Entry into Schedule CAS Numbers ITC (HS) codes 1. Phosgene : ( Carbonyl dichloride) 3A01 75-44-5 28121010 2. Cyanogen chloride [(CN) C1] 3A02 506-77-4 28530091 3. Hydrocyanic acid 3A03 74-90-8 28111910 4. Chloropicrin: Trichloronitro-Methane 3A04 76-06-2 29049080 5. Phosphorus Oxychloride 3B05 10025-87-3 28121030 6. Phosphorus trichloride 3B06 7719-12-2 28121021 7. Phosphorous Pentachloride 3B07 10026-13-8 28121022 8. ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....; Mycobacterium tuberculosis 2A016 Mycoplasma mycoides - var mycoides 2A017 Mycoplasma mycoides - var Capri 2A018 Neisseria meningitidis 2A019 Paseturella multicoda type B 2A020 Pseudomonas mallei 2A021 Pseudomonas pseudomallei 2A022 Salmonella paratyphi 2A023 Shigella dysenteriae 2A024 Staphylococcus aureus 2A025 Streptococcus pneumoniae 2A026  ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....p; Pneumocystis carinii 2C011 Schistosoma mansoni 2C012 Schistosoma japonicum 2C013 Schistosoma hemotobium 2C014 Toxoplasma gondii 2C015 Trichinella spiralis 2C016 Trypanosoma bruiei 2D Viruses, whether natural, enhanced or modified, either in the form of isolated live cultures or as material including living material which has been deliberately inoculated or contaminated with such cultures for the following: 2D001 African Horse Sickness virus 2D002 African Sw....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... hemorrhagic fever virus 2D025 Lymphocytic choriomeningitis virus (LCM) 2D026 Lassa virus 2D027 Marburg virus 2D028 Murrey valley encephalitis virus 2D029 Marchupo virus 2D030 Mason-pfizer monkey virus 2D031 Monkey pox virus 2D032 Newcastle disease virus 2D033 Omsk hemorrhagic fever virus 2D034 Peste des petits ruminant virus 2D035 Porcine enterovirus type I 2D036....
X X X X Extracts X X X X
X X X X Extracts X X X X
....bsp; Rickettsiae rickettsii 2E003 Rickettsia quintana 2E004 Rickettsia prowazebi 2F Toxins 2F001 Abrins 2F002 Aflatoxins 2F003 Anatoxins 2F004 Botulinum toxin (s) (clostradium botulinum) 2F005 Bungarotoxins 2F006 Clostridium perfringens toxins 2F007 Corynebacterium diphtheriae toxins ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....inia graminis 2G011 Puccinia erianthi 2G012 Puccinia striiformiis (Puccinia glumarum) 2G013 Pyricularia oryzae 2G014 Pseudomonas solanacearum 2G015 Peronospora hyscyami de Bary 2G016 Ralstonia solanacearum 2G017 Sugar cane Fiji disease virus 2G018 Sclerotinia sclerotiorum 2G019 Tilletia indica 2G020 Thrips palmi 2G021 Ustilago Maydis 2G022 &....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... Aluminium alloys in any form 'capable of acquiring' an ultimate tensile strength of 460 MPa or more at 293 K (20 degrees C) Note: The phrase 'capable of acquiring' encompasses alloys before or after heat treatment 3A109 Bismuth having a purity of 99.99% or greater by weight and containing less than 10 parts per million by weight of silver 3A110 Calcium containing less than 1000 parts per million by weight of metallic impurities other than magnesium and containing less than 10 parts per million by weight of Boron 3A111 Chlorine trifluoride (ClF3) 3A112 Magnesium containing less than 200 parts per million by weight of metallic impurities other than calcium and containing less than 10 parts per million by weight of boron 3A113 Tungsten, tungsten carbide, and alloys containing m....
X X X X Extracts X X X X
X X X X Extracts X X X X
....nch vehicles and sounding rockets), unmanned aerial vehicles and cruise missiles; c. Fine grain re-crystalised bulk graphites and pyrolytic or fibrous reinforced graphites usable for rocket nozzles and re-entry vehicles nose tips; d. Ceramic composite materials (dielectric constant less than 6 at any frequency from 100 MHz to 100 GHz) for use in missile radomes; e. Materials and coatings for reduced radar reflectivity; • f. Bulk machinable silicon-carbide reinforced unfired ceramic usable in re-entry vehicles nose tips. 3A3 Rocket propellants and constituent chemicals: 3A301 Propulsive substances - Hydrazine (CAS-302-01)and its derivatives usable as rocket fuel substances including Monomethylhydrazine (MMH)(CAS 60-34), Unsymmetrical di-methyl hydrazine (UDMH), (CAS 57-14-7)Hydrazine nitrate, (except aromatic hydrazines and their salts, adipic acid dihydrazide), ammonium perchlorate, spherical aluminium powder(CAS....
X X X X Extracts X X X X
X X X X Extracts X X X X
....b. Ferrocene derivatives, as follows: 1. Catocene (CAS 37206-42-1); 2. Ethyl ferrocene; 3. Propyl ferrocene(CAS 1273-89-8) 4. n-Butyl ferrocene(CAS 31904-29-7); 5. Pentyl ferrocene (CAS 1274-00-6); 6. Dicyclopentyl ferrocene(CAS 20773-28-8); 7. Dicyclohexyl ferrocene; 8. Diethyl ferrocene; 9. Dipropyl ferrocene; 10. Dibutyl ferrocene(CAS 1274-08-4); 11. Dihexyl ferrocene (CAS 93894-59-8); 12. Acetyl ferrocenes; 13. Ferrocene Carboxylic acids; 14. Butacene; c. Other ferrocene derivatives usable as rocket propellant burning rate modifiers. 3A310 Nitrate esters and nitrated plasticisers as follows: a. Triethylene glycol dinitrate (TEGDN); b. Trimethylolethane trinitrate (TMETN)(CAS 3032-55-1) ; c. 1,2,4-butanetriol trinitrate (BTTN)(CAS 6659-60-5) ; d. Diethylene glycol dinitrate (DEGDN). 3A311 ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....d interlacing machines, including adapters and modification kits for weaving, interlacing or braiding fibres to fabricate composite structures except textile machinery which has not been modified for rocket systems; 3B003 Equipment designed or modified for production of fibrous or filamentary materials as follows: converting polymeric substances; vapour deposition on heated filament substrates; wet spinning of refractory ceramics. 3B004 Equipment designed or modified for special fibre surface treatment or for producing prepregs and preforms, including rollers, tension stretchers, coating equipment, cutting equipment and clicker dies; 3B005 Chemical vapour deposition furnaces designed or modified for the densification of carbon‑carbon composites. 3B006 Pyrolytic deposition and densification equipment including: a. Technology for producing pyrolytically derived materia....
X X X X Extracts X X X X
X X X X Extracts X X X X
....c. Electroburst equipment usable for obtaining sputtered or spherical metallic powders with organisation of the process in an argon-water environment. 3B017 Sputter ion pumps 3B018 Technical data (including processing conditions) and procedures for the regulation of temperature, pressure or atmosphere in autoclaves or hydroclaves when used for the production of composites or partially processed composites. 3B019 Software specially designed or modified for the use of equipment for the production and handling of materials specified in 3A 3B020 Technology for the development, production or use of items in 3B 3C [Reserved] 3D Chemical and biomaterial manufacturing and han....
X X X X Extracts X X X X
X X X X Extracts X X X X
....an 25% nickel and 25% chromium by weight; (e.g., 'Hatelloy', 'Illium', 'Inconel', 'Incoloy') b. Nickel, or alloys with more than 40% nickel by weight; or c. Titanium; d. Ceramics. 3D004 Equipment related to P3, P4 facilities such as protective suits and class III safety cabinets. No licenses shall be granted for complete containment facilities at P3, P4, containment level as specified in the World Health Organization (WHO) bio-safety manual. 3D005 Technology related to the development, production or use of items in 3D Category 4 Nuclear-related other equipment, assemblies and components; test and production equipment; and related technology not controlled under Category 0 4A Equipment, assemblies, components including test and production equipment 4A001 F....
X X X X Extracts X X X X
X X X X Extracts X X X X
....along any linear axis (overall positioning); or 2. Two or more contouring rotary axes; Note: Item 4A002c does not control grinding machines as follows: 1. Cylindrical external, internal, and external-internal grinding machines having all the following characteristics: a. Limited to cylindrical grinding; b. A maximum work-piece outside diameter or length of 150 mm; c. Not more than two axes that can be coordinated simultaneously for contouring control; and d. No contouring c-axis; 2. Jig grinders with axes limited to x, y, c, and a, where c-axis is used to maintain the grinding wheel normal to the work surface, and the a-axis is configured to grind barrel cams; 3. Tool or cutter grinding machines with software specially designed for the manufacturing of tools or cutters; 4. Crankshaft or camshaft grinding machines. d. Non-wire type Electrical Discharge Machines (EDM) that have two or more contouring rotary axes and that can be coordinated simultaneously for contouring control. Note: Stated position....
X X X X Extracts X X X X
X X X X Extracts X X X X
....bsp; Two or more axes; and 2. A one-dimensional length measurement uncertainty equal to or better (less) than (1.25 + L/1000) µm tested with a probe of an accuracy of better (less) than 0.2 µm (L is the measured length in millimetres); b. 'Linear displacement' measuring instruments, as follows: 1. Non-contact type measuring systems with a resolution equal to or better (less) than 0.2 µm within a measuring range up to 0.2 mm; 2. Linear variable differential transformer (LVDT) systems having both of the following characteristics: a. Linearity equal to or better (less) than 0.1% within a measuring range up to 5 mm; and b. Drift equal to or better (less) than 0.1% per day at a standard ambient test room temperature +/- 1 K; 3. Measuring systems having both of the following characteristics: a. Contain a laser; and b. Maintain for at least 12 hours, over a temperature range of +/- 1 K around a standard temperature and a standard pressure: 1. A resolution over their full scale of 0.1 &mic....
X X X X Extracts X X X X
X X X X Extracts X X X X
....005 'Isostatic presses', and related equipment, as follows: a. 'Isostatic presses' as specified in 5A208; b. Dies, moulds, and controls specially designed for the 'isostatic presses' specified in Item 4A005a. Technical Notes: 1. In Item 4A005 ´Isostatic presses' means equipment capable of pressurizing a closed cavity through various media (gas, liquid, solid particles, etc.) to create equal pressure in all directions within the cavity upon a work piece or material. 2. In Item 4A005 the inside chamber dimension is that of the chamber in which both the working temperature and the working pressure are achieved and does not include fixtures. That dimension will be the smaller of either the inside diameter of the pressure chamber or the inside diameter of the insulated furnace chamber, depending on which of the two chambers is located inside the other. 4A006 &nbs....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... 1. A volume of between 150 cm3 (150 ml) and 8000 cm3 (8 litres); and 2. Made of or coated with any of the following materials, having a purity of 98% or greater by weight: a. Calcium fluoride (CaF2); b. Calcium zirconate (metazirconate) (CaZrO3); c. Cerium sulphide (Ce2S3); d. Erbium oxide (erbia) (Er2O3); e. Hafnium oxide (hafnia) (HfO2); f. Magnesium oxide (MgO); g. Nitrided niobium-titanium-tungsten alloy (approximately 50% Nb, 30% Ti, 20% W); h. Yttrium oxide (yttria) (Y2O3); or i. Zirconium oxide (zirconia) (ZrO2); b. Crucibles having both of the following characteristics: 1. A volume of between 50 cm3 (50 ml) and 2000 cm3 (2 litres); and 2. Made of or lined with tantalum, having a purity of 99.9% or greater by weight; c. Crucibles having all of the following characteristics: 1. A volume of between 50 cm3 (50 ml) and 2000 cm3 (2 litres); 2. Made of or lined with tantalum, having a purity of 98% or greater by weight; ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....bsp; A single-transverse mode output with an average output power greater than 40 W; or b. A multiple-transverse mode output with an average output power greater than 50 W;or 2. Incorporating frequency doubling to give an output wavelength between 500 and 550 nm with an average output power of greater than 40 W; d. Tuneable pulsed single-mode dye laser oscillators having all of the following characteristics: 1. Operating at wavelengths between 300 and 800 nm; 2. An average output power greater than 1 W; 3. A repetition rate greater than 1 kHz; and 4. Pulse width less than 100 ns; e. Tuneable pulsed dye laser amplifiers and oscillators having all of the following characteristics: 1. Operating at wavelengths between 300 and 800 nm; 2. An average output power greater than 30 W; 3. A repetition rate greater than 1 kHz; and 4. Pulse width less than 100 ns; Note: Item 4A012e does not control single mode oscillators. f. Alexandrite lasers having ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....rol magnets specially designed for and exported as part of medical nuclear magnetic resonance (NMR) imaging systems. ('As part of' does not necessarily mean physical part in the same shipment. Separate shipments from different sources are allowed, provided the related export documents clearly specify the 'as part of" relationship.) 4A015 High-power direct current power supplies having both of the following characteristics: a. Capable of continuously producing, over a time period of 8 hours, 100 V or greater with current output of 500 A or greater; and b. Current or voltage stability better than 0.1% over a time period of 8 hours. 4A016 High-voltage direct current power supplies having both of the following characteristics: a. Capable of continuously producing, over a time period of 8 hours, 20 kV or greater with current output of 1 A or greater; and b. Current or voltage stability better than 0.1% over a time period of 8 hours. 4A017 &nbs....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ng mandrels and dies for producing single -convolution bellows. Technical Note: The bellows referred to in Item 4A020c have all of the following characteristics: 1. Inside diameter between 75 and 400 mm; 2. Length equal to or greater than 12.7 mm; 3. Single convolution depth greater than 2 mm; and 4. Made of high-strength aluminium alloys, maraging steel, or high strength fibrous or filamentary materials. 4A021 Centrifugal multi-plane balancing machines, fixed or portable, horizontal or vertical, as follows: a. Centrifugal balancing machines designed for balancing flexible rotors having a length of 600 mm or more and having all of the following characteristics: 1. Swing or journal diameter greater than 75 mm; 2. Mass capability of from 0.9 to 23 kg; and 3. Capable of balancing speed of revolution greater than 5000 rpm; b. Centrifugal balancing machines designed for balancing hollow cylindrical rotor components and having all of the following characteristics: 1. &nb....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ated with stainless steel or molybdenum, and equipped with a cold trap capable of cooling to 193 K (-80 °C) or less; or 2. A source chamber constructed from, lined with or plated with materials resistant to UF6; f. Mass spectrometers equipped with a micro-fluorination ion source designed for actinides or actinide fluorides. Note: Mass spectrometers especially designed or prepared for analyzing on-line samples of uranium hexafluoride are controlled under Prescribed Equipment (0B Category). 4A025 Specialized packings which may be used in separating heavy water from ordinary water, having both of the following characteristics: a. Made of phosphor bronze mesh chemically treated to improve wettability; and b. Designed to be used in vacuum distillation towers. 4A026 Pumps capable of circulating solutions of concentrated or dilute potassium amide catalyst in liquid ammonia (KNH2/NH3), having ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....es with low sulphur content and with an austenitic ASTM (or equivalent standard) grain size number of 5 or greater; or 2. Equivalent materials which are both cryogenic and H2-compatible; and d. With internal diameters of 1 m or greater and effective lengths of 5 m or greater. 4A030 Ammonia synthesis converters or synthesis units, in which the synthesis gas (nitrogen and hydrogen) is withdrawn from an ammonia/hydrogen high-pressure exchange column and the synthesized ammonia is returned to said column. 4B Equipment, assemblies and components, including test and measurement equipment usable in development of nuclear explosive devices 4B001 Photomultiplier tubes having both of the following characteristics: a. Photocathode area of greater than 20 cm^2; and b. Anode pulse rise time of less than 1 ns. 4B002 Flash X-ray ge....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... and bearings. 4B005 Electronic streak cameras, electronic framing cameras, tubes and devices, as follows: a. Electronic streak cameras capable of 50 ns or less time resolution; b. Streak tubes for cameras specified in Item 4B005a; c. Electronic (or electronically shuttered) framing cameras capable of 50 ns or less frame exposure time; d. Framing tubes and solid-state imaging devices for use with cameras specified in Item 4B005c, as follows: 1. Proximity focused image intensifier tubes having the photocathode deposited on a transparent conductive coating to decrease photocathode sheet resistance; 2. Gate silicon intensifier target (SIT) vidicon tubes, where a fast system allows gating the photoelectrons from the photocathode before they impinge on the SIT plate; 3. Kerr or Pockels cell electro-optical shuttering; 4. Other framing tubes and solid-state imaging devices having a fast image gating time of less than 50 ns specially designed for cameras specified in Item 4B005c. 4B....
X X X X Extracts X X X X
X X X X Extracts X X X X
....per in some designs is driven by magnetic force. The term exploding foil detonator may refer to either an EB or a slapper-type detonator. Also, the word initiator is sometimes used in place of the word detonator. 4B009 Firing sets and equivalent high-current pulse generators, as follows: a. Explosive detonator firing sets designed to drive multiple controlled detonators specified by Item 4B008 above; b. Modular electrical pulse generators (pulsers) having all of the following characteristics: 1. Designed for portable, mobile, or ruggedized-use; 2. Enclosed in a dust-tight enclosure; 3. Capable of delivering their energy in less than 15 µs; 4. Having an output greater than 100 A; 5. Having a 'rise time' of less than 10 µs into loads of less than 40 ohms; 6. No dimension greater than 25.4 cm; 7. Weight less than 25 kg ; and 8. Specified to operate over an extended temperature range of 223º to 373º K (-50 ºC to 100 ºC) or specified as su....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ated technology, and specially designed components and accessories therefor. 5A Rocket Systems (including ballistic missiles, space launch vehicles and sounding rockets) 5A1 Systems 5A101 Systems for missiles and rockets, including: a. complete rocket systems (including ballistic missile systems, space launch vehicles and sounding rockets) b. complete rocket stages with engines c. solid or liquid fuel rocket engines and their control systems including liquid propellant apogee engines designed or modified for satellites Note: 5A101 does not control JATO units, propulsion units for flares, ejection seats, emergency escape equipment and rockets for display fireworks. 5A102 Subsystems and components usable in missiles and rockets including: a. rocket motor cases, interior lining, insulation and nozzles; b. rocket s....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ck or closed loop test equipment and software thereof (Refer 4A006). 5A205 Flow-forming machines and specially designed components thereof which, according to the manufacturers technical specification, 1. can be equipped with numerical control units or a computer control, even when not equipped with such units at delivery; and 2. have more than two axes which can be coordinated simultaneously for contouring control. Note: Item 5A205 includes machines which have only a single roller designed to deform metal plus two auxiliary rollers which support the mandrel, but do not participate directly in the deformation process. 5A206 Filament winding machines for which the motion for positioning wrapping and winding fibres can be coordinated and programmed in two or more axes; precision mandrels thereof, and coordinating and programming controls; 5A207 Tape-laying machines of which the motions for positioning and laying tape a....
X X X X Extracts X X X X
X X X X Extracts X X X X
....propellants or propellant constituents as referred in 3A3; 5A217 Launch and ground support equipment and facilities usable for rocket systems (including ballistic missile systems, space launch vehicles and sounding rockets), unmanned airborne system and cruise missiles as follows:- a. apparatus, devices and vehicles, designed or modified for the transport, handling, control, activation and launching of the systems. b. gravity meters (gravimeters), gravity gradiometers, and specially designed components thereof, designed or modified for airborne or marine use usable for complete rocket systems and for complete unmanned aerial vehicle systems (including cruise missile systems target drones and reconnaissance drones) c. telemetry and tele-command equipment, including ground equipment, designed or modified for complete rocket systems and complete unmanned aerial vehicle systems and cruise missiles, excluding control equipment designed or modified for manned aircraft or satellites, control ground based equipment designed or modified for terrestrial or marine applicatio....
X X X X Extracts X X X X
X X X X Extracts X X X X
..../ combined cycle engines, including devices to regulate combustion, and specially designed components. g. Complete unmanned aerial vehicle systems having an autonomous flight control and navigation capability or capability of controlled flight out of the direct vision range involving a human operator, designed or modified to incorporate an aerosol dispensation mechanism, or capable of carrying elements of a payload in the form of a particulate or liquid other than fuel components of such vehicles. Note: This category does not control unpowered airborne vehicles such as gliders, hot air balloons etc. h. Safing, arming, fusing and firing mechanisms for weapons or warhead. i Production facilities and Production equipment specially designed for equipment or materials for 5B. j. Technology, for the development, production or use of equipment, materials or software specified for 5B. k. Software, for the development, production or use of equipment or materials specified for 5B. l. Software which coordinates the function of m....
X X X X Extracts X X X X
X X X X Extracts X X X X
....date the position and/or velocity, either periodically or continuously throughout the flight (example: satellite navigation receiver, radar altimeter and/or Doppler radar); integration hardware and software 5C008 Production equipment and other test, calibration and alignment equipment, designed or modified to be used with equipment specified in 5C001 - 5C004 and 5C007. 5C009 Equipment used to characterize mirrors for laser gyros such as scatterometer, reflectometer and profilometer and for other inertial equipments such as Inertial measurement unit (IMU Module) tester, IMU Platform tester, IMU stable element handling fixture, Gyro tuning test station, Gyro dynamic balance station, Gyro run-in/motor test station, Gyro evacuation and filling station, Centrifuge fixture for gyro bearings, Accelerometer axis align station and Accelerometer test station. 5C010 Avionics equipment and embedded or specially designed software and components thereof, includin....
X X X X Extracts X X X X
X X X X Extracts X X X X
....5C015 Balancing machines capable of balancing rotors/assemblies and correcting unbalance in two planes or more. 5C016 Indicator heads or balancing instrumentation designed or modified for use with balancing machines 5C017 Motion simulators/rate tables (equipment capable of simulating motion) having all of the following characteristics two axes or more slip rings capable of transmitting electrical power and/or signal information 5C018 Position tables (equipment capable of precise rotary positioning in any axes) having two axes or more and a position accuracy equal to or better than 5 arc second 5C019 Centrifuges capable of imparting accelerations and having slip rings capable of transmitting electrical power and signal information 5C020 Design ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ed by 5D001c; e. Pressurized breathing equipment and partial pressure suits for use in aircraft anti-g suits, military crash helmets and protective masks, liquid oxygen converters used for aircraft or missiles, and catapults and cartridge actuated devices for emergency escape of personnel from aircraft; f. Parachutes: 1. Paragliders, drag parachutes, drogue parachutes for stabilization and attitude control of dropping bodies, (e.g. recovery capsules, ejection seats, bombs); 2. Drogue parachutes for use with ejection seat systems for deployment and inflation sequence regulation of emergency parachutes; 3. Recovery parachutes for guided missiles, drones or space vehicles; 4. Approach parachutes and landing deceleration parachutes. g. Automatic piloting systems for parachuted loads, equipment specially designed or modified for military use for controlled opening jumps at any height, including oxygen equipment. Note 1: 5D001b does not control aircraft or variants of those aircraft specially designed for military use which: 1. Have been certified for civil use....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ion is unknown or the control status of the equipment in which the integrated circuit will be used is unknown, Fast Fourier Transform (FFT) processors, electrical erasable programmable read-only memories (EEPROMs), flash memories or static random-access memories (SRAMs), having any of the following: a. Rated for operation at an ambient temperature above 398 K (+125°C); b. Rated for operation at an ambient temperature below 218 K (-55°C); or c. Rated for operation over the entire ambient temperature range from 218 K (-55°C) to 398 K (+125°C). 7A006 Radiation-hardened analogue-to-digital and digital-to-analogue converter integrated circuits, as follows: a. Analogue-to-digital converters having any of the following: 1. A resolution of 8 bit or more, but less than 12 bit, with a total conversion time of less than 5 ns; 2. A resolution of 12 bit with a total conversion time of less than 200 ns; or 3. A resolution of more than 12 bit with a total con....