Amendment to 7 Notifications

X X   X X   Extracts   X X   X X

Full Text of the Document

X X   X X   Extracts   X X   X X

....f the said Table. THE TABLE Sl. No. Notification No. and date Amendment (1) (2) (3) 1. (i)  157-Cus., dated the 2nd August, 1976. In the said notifications, the following Explanation shall be added at the end, namely :-   (ii) 160-Cus., dated the 2nd August, 1976.     (iii) 22-Cus., dated the 7th February, February, 1977. "Explanation. - In this notification, "furnace oil" means any hydrocarbon oil which is ordinarily used as furnace fuel and not suitable for use in spark ignition engines and which satisfies the following requirements :   (iv) 257-Cus., dated the 16th December, 1977 (i) has its flash point at or above 66^o centigrade,   ....

X X   X X   Extracts   X X   X X

Full Text of the Document

X X   X X   Extracts   X X   X X

....ared edges, of rectangular section, of a thickness not exceeding 6 millimetres, of width not exceeding 500 millimetres and of such dimensions that the thickness does not exceed one-tenth of the width, in straight strips, coils or flattened coils." 4. 142-Cus., dated the 16th May, 1981. In the Schedule to the said notification, the following Explanation shall be added, namely :-   "Explanation. - For the purpose of this notification, "sheets" or "plates" means rolled products (other than coiled semi-finished hot rolled products, of a rectangular section, not less than 1.5 millimetre thick, of a width exceeding 500 millimetres and a weight not less than 500 kilograms per piece) of any thickness and, if in rectangles, of a ....

X X   X X   Extracts   X X   X X

Full Text of the Document

X X   X X   Extracts   X X   X X

....ication, -   (i)  "high carbon steel" means steel containing, by weight not less than 0.6 per cent of carbon and having a content, by weight, less than 0.04 per cent of phosphorus and sulphur taken separately and less than 0.07 per cent of these elements taken together;     (ii)  "sheets" or "plates" means rolled products (other than coiled semi-finished hot-rolled products, of a rectangular section, not less than 1.5 millimetres thick, of a width exceeding 500 millimetres and a weight of not less than 500 kilograms per piece) of any thickness and, if in rectangles, of a width exceeding 500 millimetres;     (iii)  "strips" means rolled products with sheared or un-shear....