TaxTMI 
TaxTMI 
Exemption and effective rates of basic and additional customs duty on various goods falling under Chapters 1 to 99
X X X X Extracts X X X X
X X X X Extracts X X X X
....ch of the additional duty leviable thereon under sub-section (1) of section 3 of the said Customs Tariff Act, as is in excess of the rate specified in the corresponding entry in column (5) of the said Table, subject to any of the conditions, specified in the Annexure to this notification, the condition No. of which is mentioned in the corresponding entry in column (6) of the said Table. Explanation : - For the purposes of this notification, the rate specified in column (4) or column (5), is ad valorem rate, unless indicated otherwise. TABLE S. No. Chapter or heading No. or sub-heading No. Description of goods Standard Rate Additional duty Rate Condition No. (1) (2) (3) (4) (5) (6) 1. 1 Cows, heifers, bulls, goats, sheep, pigs, angora rabbits, ducklings and pureline poultry stock Nil - - 2. 1 Grand parent poultry stock and Donkey stallions 20% - - 3. 5 Pancreas Nil - - 4. 6, 7, 8 or 12 The following planting materials, namely, oil seeds, seeds of vegetables, flowers and ornamental plants, tubers and bulbs of flowers, cuttings or saplings of flower plant....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... Nil - 4 31. 27.10 Naphtha Nil - - 32. 27.10 or 2714.90 All goods, for the manufacture of fertilsers Nil Nil 5 33. 2711.11 or 2714.90 All goods, for the purpose of power generation - Nil - 34. 28 or 29 Chemicals, for use in the manufacture of Centchroman Nil - - 35. 28 The following goods :- 10% - - (i) Radium and its salts; (ii) radioactive isotopes of iodine, phosphorus, cobalt, caesium and all chemical compounds containing such radioactive isotopes; (iii) Molybdenum 99 and technetium 99 m isotopes; (iv) Enriched uranium or uranium oxide. 36. 28 Sodium Cyanide or phosphorus pentachloride 25% - - 37. 28 Lithium Carbonate, Soda ash or Ammonia 30% - - 38. 28 Tabular/sintered/calcined Alumina of purity of 99% and above 30% - - 39. 28 Anhydrous ammonia or phosphoric acid, for the manufacture of fertilisers Nil N....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ulations or bulk drugs, namely Nilutamide, Sodium fusidate, Low molecular weight heparin or Erythropoietin 10% - 6 54. 28, 29 or 30 Formulations or bulk drugs, namely, Ceftazidime, Cefotaxime, Cisplatium, Melaginina, Measles vaccine, Vinblastine, Vincristine, Zidovudine, Alprostadil, Ceftriaxone, Carbencillin di- sodium, Estradiol patch, Lincomycin HCl, Prostaglandin F2 alpha (PGF2), Salazosulpha pyridine Sulphadoxine or Sulphamethoxy pyrazine 20% - 6 55. 28, 29, 30 or 38 The following goods - (A) The life saving drugs or medicines (including diagnostic test kits) specified in List 2 Nil Nil - (B) Bulk drugs used in the manufacture of life saving drugs or medicines at (A) above Nil - - (C) Other Life saving drugs or medicines Nil Nil 7 56. 30 Homoeopathic medicines 25% - - 57. 30 Medicaments containing spirit - Nil - 58. 3102.10 Urea, for use as manure Nil - - 59. 31 Kyanite salts, in a form indicative of their use for manurial purpose Nil - - 60. 31 Muriate of potash, for use as manure or fo....
X X X X Extracts X X X X
X X X X Extracts X X X X
....lp (excluding rayon grade wood pulp) derived by mechanical or chemical means from any fibrous vegetable material Nil - 13 81. 47.07 All goods - Nil - 82. 48 Grape guard, namely, paper of a type generally used for the packing of grapes and which consists of two sheets of treated white paper pressed together with thin rectangular pouches containing sodium meta-bi-sulphite, with kraft paper pasted thereto or a single paper coated with sodium meta-bi-sulphite, and which is used for the purpose of preventing fungal decay and thus helps prolonged storage in fresh condition, imported for use in the packing of grapes Nil Nil - 83. 48.01 Newsprint Nil Nil - 84. 4802.60 Paper (excluding chrome paper, marble paper, flint paper, poster paper, stereo paper and art paper) containing mechanical wood pulp amounting to not less than 70 per cent by weight of the total fibre content Nil Nil - 85. 49 `Commonwealth and International Reply Coupons' and `UNESCO Coupons' Nil Nil - 86. 49 Greeting cards, diaries and calendars and such number of envelopes as correspond to the number of such gr....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... 40% - - 108. 71 Rough semi-precious stones Nil - - 109. 71 Ash and residues containing precious metal or precious metal compounds, of a kind used principally for the recovery of precious metal 10% - - 110. 72 Hot rolled stainless steel coils 25% - - 111. 72 Tin mill black plate (TMBP) coils, for the manufacture of tin plates only 25% - - 112. 72.01 Pig iron 20% - - 113. 72.02 Ferro alloys, other than ferro-nickel and ferro-molybdenum 25% - - 114. 72.02 Ferro-alloys 20% - - (i) Ferro-nickel; (ii) Ferro-molybdenum 115. 72.03 Hot briquetted iron (HBI) and sponge iron, imported by or on behalf of an electric arc furnace unit or induction furnace unit 20% - - 116. 72.04 Melting scrap of iron or steel (other than stainless steel or heat resisting steel), for use in electric arc furnace or induction furnace or melting in a hot blast cupola or for supply to a unit for use in electric arc furnace or induction furnace or melting....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... of ground power units and air jet starters - 10% - - (1) Diesel engines of 2400 rpm; (2) Alternators of 400 Hz, 115/200 V and 2400 rpm; (3) Oil free dry screw compressor 129. 84 or any other chapter The following goods, for manufacture of solar energy equipments - 10% Nil - (1) vacuum tube solar collectors; (2) concentrating solar collectors; (3) stirling engine 130. 84.82 Ball or roller bearings, of bore diameter more than 50 mm 25% - - 131. 84.82 Ball or roller bearings, of bore diameter 50 mm or less 10% + Rs. 150 per Kg. - - 132. 8482.91 or 8482.99 Parts of ball or roller bearings 25% - - 133. 85.06 Button cells 25% - - 134. 73, 84 or 85 Agricultural silos 25% - - 135. 8543.89 Complete ozone generators 25% - - 136. 8414.40, 84....
X X X X Extracts X X X X
X X X X Extracts X X X X
....oley balloon catheter) specified in List 8 10% Nil - (II) Parts, for the manufacture of goods at (I) above 10% - 25 (III) Spare parts, required for the maintenance of the goods at (I) above 10% - 25 150. 84.71 or 85.04 Computer peripheral devices and power supply units supplying power under the control of computer system to which they belong, for the manufacture of computer systems to be supplied to a research institution only Nil Nil 26 151. 85, 90 or any other chapter Television equipment, came- ras and other equipment for taking films, imported by a foreign film unit or television team Nil Nil 27 152. 28, 38, 85 or 98 The following goods, namely :- 28 (A) Silicon in all forms, namely, polycrystalline silicon or ingots, for the manufacture of undiffused silicon wafers 10% Nil (B) Undiffused silicon wafers, for the manufacture of solar cells or solar cell modules 10% Nil (C) Solar cells and modules and photo-voltaic systems, for the manufactur....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ation of any Union Territory or a local body for fire fighting operations Nil Nil 36 172. 87, 40, 70, 73, 83, 84, 85 The goods specified in List 14, for the manufacture of light commercial vehicles of pay- load not exceeding 4000 kilograms 25% Nil 37 173. Any Chapter Raw material and compo- nents, required for the manufacture of aircrafts to be used for training purposes 25% Nil 38 174. 88. Aeroplanes, helicopters, simulators of aeroplanes and gliders Nil - - 175. Any Chapter Parts, of aeroplanes, gliders, helicopters or simulators of aircrafts (excluding rubber tyres and tubes for aeroplanes or gliders) 3% Nil 39 176. Any chapter Raw materials for manufacture of, - 3% Nil 40 (i) aircrafts falling under heading No. 88.02; (ii) parts of aircrafts at (i) above. 177. 89 Barges imported along with ships for the more speedy unloading of imported goods and loading of export goods Nil Nil 41 178. Any chapter Capital goods and spares thereof, raw materials, comp....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... - 50 193. 90 or any other chapter The following goods - (A) Medical equipments (excluding Foley Balloon Catheters) specified in List 16; Nil Nil - (B) Accessories of the medical equipment at (A) above; Nil Nil - (C) Parts required for the manufacture of the medical equipments at (A) above and spare parts required for the maintenance of the medical equipment at (A) above. Nil Nil 51 194. 90 or any other chapter Life saving medical equip- ment including accessories or spare parts or both of such equipment Nil Nil 52 195. 90 or any other chapter Parts required for the manu- facture, and spare parts required for the maintenance, of medical equipment falling under heading No. 90.18 to 90.21 and sub-heading Nos. 9022.12, 9022.13, 9022.14 or 9022.21 10% - 53 196. 90 or any other chapter The following goods - (A) Medical equipment specified in List 17; Nil Nil - (B) Parts required for the manufacture of medical equipment a....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... Nil (v) power transmission projects of 66 KV and above; 20% 10% (vi) other industrial plants or projects 25% 10% 207. 99 All goods - Nil - ANNEXURE Condition No. Conditions 1. If the importer gives a declaration that such material is for the purposes of sowing or planting only. 2. If the goods are donated as a gift free of cost and supplied under an agreement duly approved by the Government of India : Provided that this exemption shall have effect only upto and inclusive of 31st day of March, 1997. 3. If the importer furnishes an undertaking to the Assistant Commissioner of Customs that the wine shall be used as sacramental wine. 4. The expression"Kerosene" shall refer to any hydrocarbon oil (excluding mineral colza oil and white spirit) which has a smoke point of 18 mm or more [determined in the apparatus known as the smoke point lamp in the manner indicated in the Bureau of Indian Standards specification ISI : 1448(P. 31) - 1968 as in force for the time being] and is ordinarily used as an illuminant in oil burning lamps. 5. ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....uantity of the goods as is not proved, to the satisfaction of that Assistant Commissioner, to have been used in the manufacture of solar cells or solar cell modules, an amount equal to the difference between the duty which would have been leviable on such quantity but for the exemption under this notification and that paid at the time of importation. 9. If, the Central Board of Film Censors or, as the case may be, an officer not below the rank of a Director, All India Radio or Doordarshan, certifies that the said film is predominantly educational in character. 10. If certified by the Ministry of Defence that the film is predominantly educational in character and is meant for training of defence personnel. 11. If certified by the Ministry of Information and Broadcasting that the films and video cassettes are intended for archival study, or record and reference purposes. 12. If, - (a) imported for the purpose of manufacture of Copper-T Contraceptives; (b) the importer produces a certificate from the Financial Adviser in the Ministry of Health and Family Welfare that the goods are required for the above purpose and such certificate rec....
X X X X Extracts X X X X
X X X X Extracts X X X X
....rposes, within a period of three months or such extended period as the Assistant Commissioner of Customs may allow; and (c) he shall pay on demand, in the event of his failure to comply with the above conditions, an amount equal to the difference between the duty leviable on such quantity of the said imported goods but for the exemption under this notification and that already paid at the time of importation. 15. If, - (a) the importer furnishes an undertaking to the Assistant Commissioner of Customs that such melting scrap will be used for the purpose specified and in the event of his failure to comply with this condition, he shall be liable to pay, in respect of such quantity of the said scrap as is not proved to have been so used, an amount equal to the difference between the duty leviable on such quantity but for the exemption under this notification and that already paid at the time of importation; and (b) the importer produces to the said Assistant Commissioner, within six months or such extended period, as that Assistant Commissioner may allow, a certificate issued by the Assistant Commissioner of Central Excise in whose jurisdict....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... the time of importation. 18. If the importer at the time of importation furnishes an undertaking to the Assistant Commissioner of Customs to the effect that, - (a) in the case of wind operated electricity generators and wind operated battery chargers the goods shall not be sold or otherwise disposed of in any manner for a period of at least two years from the date of importation; (b) in the case of parts of wind operated electricity generators, they shall be used for the manufacture of wind operated electricity generators; and (c) in case he fails to comply with condition (a) or condition (b) or both conditions, as the case may be, he shall pay an amount equal to the difference between the duty leviable on the imported goods but for the exemption under this notification and that already paid at the time of importation. 19. (a) If an officer not below the rank of a Deputy Secretary to the Government of India in the Department of Fertilizers - (i) certifies that the scheme for renovation or modernisation, as the case may be, of the fertilizer plant has been granted techno-economic clearance by the said Department; &n....
X X X X Extracts X X X X
X X X X Extracts X X X X
....l, communication, air-traffic control and landing equipment and spares for maintenance of such equipment are required to be used for the modernisation of airport facilities and recommends the grant of exemption to the said goods. 22. If, - (i) in the case of a power plant (except a nuclear power plant), an officer not below the rank of Director in the Central Electricity Authority certifies that the scheme for renovation or modernisation, as the case may be, of such power plant, has been granted techno-economic clearance by the said Authority and an officer not below the rank of a Deputy Secretary to the Government of India in the Department of Power recommends, in each case, the grant of the aforesaid exemption to the goods for such scheme; (ii) in the case of nuclear power plant, an officer not below the rank of a Deputy Secretary to the Government of India in the Department of Atomic Energy certifies that the said power plant has been granted techno-economic clearance and recommends the grant of the aforesaid exemption to the goods for such scheme; and (iii) in all cases, the importer furnishes an undertaking to the Assistant Commissi....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... the Assistant Commissioner of Customs, to the effect that - (a) the parts, or as the case may be, the spare parts shall be used for the manufacture or maintenance, as the case may be, of the medical equipment specified in List 8 to the notification; (b) he shall, within three months or such extended period that the said Assistant Commissioner may allow, produce - (i) in the case of parts, a certificate from the Assistant Commissioner of Central Excise having jurisdiction over the factory manufacturing the said medical equipment, to the effect that the parts have been used in the manufacture of the said medical equipment; or (ii) in the case of spare parts, necessary evidence to the satisfaction of the Assistant Commissioner of Customs to the effect that the spare parts have been used for the maintenance of the specified medical equipment; and (c) he shall pay on demand, in the event of his failure to comply with the above conditions, an amount equal to the difference between the duty leviable on such quantity of the parts or, as the case may be, spare parts, but for the exemption under this notification and that alre....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... goods (in respect of description, quantity and technical specifications) are required for the manufacture of laser and laser-based instrumentation; and (2) furnishes an undertaking to the Assistant Commissioner of Customs to the effect that the imported goods shall be used for the above purpose and he shall pay, on demand, in the event of his failure to use the imported goods for the above purpose, an amount equal to the difference between the duty leviable on such quantity of the imported goods but for the exemption under this notification and that already paid at the time of importation. 30. If the importer produces to the Assistant Commissioner of Customs at the time and place of importation, - (i) a certificate issued by an officer not below the rank of a Deputy Principal Information Officer in the Press Information Bureau in the Ministry of Information and Broadcasting to the effect that the importer is an accredited news agency; and (ii) an undertaking to the effect that the imported goods shall remain in possession, control and use of the agency and shall not be sold or parted with for a period of five years from the date of impo....
X X X X Extracts X X X X
X X X X Extracts X X X X
....specified above, and also recommending the grant of this exemption. Explanation. - "Licensed amateur radio operator" means a person duly authorised under the Indian Wireless Telegraphs (Amateur Service) Rules, 1978, made under sections 4 and 7 of the Indian Telegraph Act, 1885 (13 of 1885). 34. If in the case of imports, - (1) for the Teleteach/Margdarshan Programme, the Managing Director of M/s. Electronic Trade and Technology Development Corporation Limited, certifies that the said cassettes and tapes are predominantly educational in character and the importer furnishes an undertaking to the effect that - (i) the certificate from the Central Board of Film Certification in the Form below, shall be produced within a period of three months or such extended period as the said Assistant Commissioner may allow; and (ii) he shall pay on demand, in the event of his failure to comply with (i) above, an amount equal to the difference between the duty leviable on such quantity of said cassettes and tapes but for the exemption under this notification and that already paid at the time of importation; or (2) made by the Tel....
X X X X Extracts X X X X
X X X X Extracts X X X X
....hting operations by any of the specified Fire Services and recommends grant of the exemption. 37. If, - (a) the importer within such period as the Assistant Commissioner of Customs may specify in this behalf, produces a certificate from the Assistant Commissioner of Central Excise in whose jurisdiction the factory manufacturing motor vehicles using the imported goods specified in List 14 to the notification is situated, to the effect that such imported goods have been used in the manufacture of light commercial vehicles of pay-load not exceeding 4000 kilograms; (b) the importer furnishes an undertaking to the effect that - (1) the goods shall be used for the purpose specified; (2) an account of the said goods received and consumed in the place of manufacture for the aforesaid purpose shall be maintained in the manner specified by the Assistant Commissioner of Customs; (3) he shall produce the extract of such account duly certified by the jurisdictional Assistant Commissioner of Central Excise evidencing receipt of the said goods in the premises of the place of manufacture and the use thereof for manufacture of t....
X X X X Extracts X X X X
X X X X Extracts X X X X
....executes a bond, in such form and for such sum as may be specified by the Assistant Commissioner of Customs, binding himself to pay that sum if the re-export does not take place within the period specified under condition (b) above. 42. If,- (a) the importer maintains a proper account of import, use and consumption of the specified goods imported for the purpose of repairs of ocean-going vessels and submits such account periodically to the Commissioner of Customs in such form and in such manner as may be specified by the said Commissioner; (b) the importer, by the execution of bond, in such form and for such sum as may be specified by the said Commissioner, binds himself to pay on demand an amount equal to the duty leviable :- (1) on the capital goods or spares thereof or material handling equipments, as are not proved to the satisfaction of the said Commissioner to have been installed or otherwise used for the aforesaid purpose; (2) on components, raw material and consumables, as are not proved to the satisfaction of the said Commissioner to have been used or consumed for the aforesaid purpose, within a period of three mont....
X X X X Extracts X X X X
X X X X Extracts X X X X
....that notification; (b) he shall maintain an account of the imported goods received and consumed in the place of manufacture in the manner specified by the Assistant Commissioner of Customs and produce, within a period of three months of the importation, or such extended period as the said Assistant Commissioner may allow, an extract of such account duly certified by the manufacturer evidencing receipt of the imported goods in the place of manufacture and such production; and (c) he shall pay on demand, in the event of his failure to comply with the above conditions, an amount equal to the difference between the duty leviable on such quantity of the imported goods but for the exemption under this notification and that already paid at the time of importation. 46. (i) If the importer produces a certificate from an officer not below the rank of a Deputy Principal Information Officer in the Press Infor- mation Bureau in the Ministry of Information and Broadcasting to the effect that the importer is an accredited press cameraman, and that the importer has not availed, on any occasion in the previous five years, exemption under this notification or the noti....
X X X X Extracts X X X X
X X X X Extracts X X X X
....apped person for his own use or by or on behalf of an association for the handicapped. 50. If the importer furnishes an undertaking to the effect that - (1) the component parts shall be used for the manufacture of hearing aids; (2) he shall maintain an account of the component parts, received and consumed in the place of manufacture for the aforesaid purpose, in the manner specified by the Assistant Commissioner of Customs; (3) he shall produce the extract of such account duly certified by the manufacturer, evidencing receipt of the said component parts in the place of manufacture, within a period of three months or such exten- ded period as the said Assistant Commissioner may allow; and (4) he shall pay on demand, in the event of his failure to comply with the above conditions, an amount equal to the difference between the duty leviable on such quantity of the said component parts but for the exemption under this notification and that already paid at the time of importation. 51. If the importer furnishes an undertaking to the Assistant Commissioner of Customs, to the effect that - (a) the parts, or as the....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ure, or as the case may be, maintenance of the said medical equipment; (b) he shall within three months or such extended period that the said Assistant Commissioner may allow, produce - (i) in the case of parts, a certificate from the Assistant Commissioner of Central Excise having jurisdiction over the factory manufacturing the said medical equipment, to the effect that the parts have been used in the manufacture of the said medical equipment; or (ii) in the case of spare parts, necessary evidence to the satisfaction of the Assistant Commissioner of Customs to the effect that the spare parts have been used for the maintenance of the said medical equipment; and (c) he shall pay on demand, in the event of his failure to comply with the above conditions, an amount equal to the difference between the duty leviable on such quantity of the parts or, as the case may be, spare parts, but for the exemption under this notification and that already paid at the time of importation. 54. If the importer furnishes an undertaking to the Assistant Commissioner of Customs, to the effect that - (a) the parts, or as the case may b....
X X X X Extracts X X X X
X X X X Extracts X X X X
....m the Assistant Commissioner of Central Excise in whose jurisdiction the factory manufacturing wrist watches is situated, to the effect that the imported components have been used in the manufacture of the said wrist watches. 57. If, - (a) the importer executes a bond in such form and for such sum as may be specified by the Assistant Commissioner of Customs, binding himself to pay on demand, in respect of such quantity of the component parts as is not proved, to the satisfaction of the said Assistant Commissioner, to have been used for the manufacture of electronic modules of the specified wrist watches, an amount equal to the difference between the duty leviable on such component parts but for the exemption under this notification and that already paid at the time of importation; and (b) the importer, within such period as the said Assistant Commissioner may specify in this behalf, produces a certificate from the Assistant Commissioner of Central Excise in whose jurisdiction the factory manufacturing such electronic modules is situated, to the effect that the imported component parts have been used in the manufacture of the said electronic modules. ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ne (18) Lincomycin powder (19) Lincospectin (bulk drug lincomycin spectinomycin 1 : 2) (20) Maduramicin ammonium/haduramycin ammonium (21) Monensin granulated (coban premix) (22) ovaprim [gonadotropin releasing hormones] (GnRH) analogue with domperidone (23) Pleuromutilin (24) Pregnant mare serum (PMSG) (25) Prostaglandin F2 alpha (26) Prostagladin (27) Prostaglandins (PgF2 alpha) (28) Robenidin (29) Tiamulin hydrogen fumarate (30) Tiamulin hydrochloride (31) Tylan premix (32) Tylosin tartarate/tylosin phosphate (33) Vaccine for fish (34) Virginiamycin (35) 4-hexyl resorcinol. LIST 2 (1) 32 P Sodium Phosphate (2) 5-Fluorocytosin (3) 5-Fluorouracil (4) 6-Isoguanine (5) Aclarubicin (6) Actinomycin D (7) Acyclovir (8) Adriamycin (9) Agglutinating Sera (10) Allopurinol (11) Alpha interferon (NL) (12) Ambinonium Chloride (13) Amikacin Sulphate (14) Amino-glutothemido (15) Amiodarone Hydrochloride (16) Amiphenazole Hydrochloride (17) Amphotericin-B (18) Amrinon (19) Amsacrine (20) Amilobarbitone Sodium (21) Anti-Diphtheria Normal Human Immunoglobulin (22) Anti-Haeomophilic Factor concentrate (VIII and IX) (23) Anti-Human lymophocyte immunoglobulin IV (24) Anti-human thymocyte immun....
X X X X Extracts X X X X
X X X X Extracts X X X X
....cell] (111) Inactivated rabies vaccine [Verocells] (112) Indium (III) in blecomycin (113) Indium 113 Sterile generator and Clution accessories (a) Indium 113 in brain scanning kit (b) Indium 113 in liver scanning kit (114) Interferon alpha-2b/interferon alpha- 2a/Interferon NL/ Interferon alpha NL(LNS) (115) Intravenous amino acids (116) Intravenous Fat Emulsion (117) Iopamidol (118) Iohexol (119) Ketamine Hydrochloride (120) Isoflurane Liquid (121) L-Selelomethionine (75 Se) (122) L-Asparaginase (Colaspase) (123) Leucovorin Calcium (124) Lactulose (125) Levodopa with benserazine (126) Levodopa (L-Dopa) (127) Mannitol Busulphan preparations (128) Lomustine (CCNU) (129) Meningococcoal A+C combined vaccine with diluant solvent (130) Melphalan (131) Mercaptopurine (132) Mesna (133) Methisazone (134) Methicilin Sodium (135) Methoxyiso-butyl Isonitrile (136) Methotrexate (137) Methyl prednisolone (138) Methoxyflarane (139) Metrizamide vials with diluant (140) Metraminol (141) Mithramycin (142) Mimustine Hydrochloride (DC's) (143) Mitotane (144) Mitomycin C (145) MMR (Measles, mumps and rubella) vaccine (146) Mitoxantrone (147) Moxalactum (148) Monocomponent insulins (149) Nalorphine....
X X X X Extracts X X X X
X X X X Extracts X X X X
....done (ii) Ethyl iodophenylun decylate (iii) Iodipammide methyl glucamine (iv) Lipidoll utra fluid (v) Patent blue (228) Anti D Immuno globulin (229) Aurothiomalate Sodium (230) Botulinum Toxin Type `A' (231) Carboplatin (232) Cefixime (233) Cefuroxime (234) Decapatyl Depot (235) D.K. line 100% purified perflurodicalin liquid (236) Filgrasim/Molgramostim (G- CSF/GM-CSF) (237) Flecainide (238) Fluconazole (239) Foetal Bovine Serum (FBS) (240) Gadolinium DTPA Dimeglumine (241) HTLV - 1 Western Blot Kits (242) Human Tetanus Immunoglobin (243) Immucyst (244) Iopromide (245) Iotrolan (246) Legionella Pneumophilis IF kits (247) Muromonab - CD 3 (248) Octreotide (249) Typhoid Vaccines : (i) VI Antigen of Salmonella Typhi (ii) Ty 21a cells and attenuated non-pathogenic strains of S. Typhi (250) Ortho brain thromboplastin (Rabbit brains thromboplastin for PT test) (a) Activated thrombofax (Reagent for PT tests) (b) Fibrindex (Human Thrombin for TT tests) (251) Pneumocystis carinil IF kits (252) Polyestradiol (253) Puenoxytelzamins (254) Rabies immunoglobulin from equine origin (255) Sodium Hyalauronate sterile solution 1.4% (256) Thrombokinase (257) V.M. 26 (258) Viofdarbine LIST 3 ....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... 4 mm (28) Nickel silver circles of thickness 0.5 mm and below and diameter 24 mm to 50 mm (29) Tritium activated zinc sulphide (30) Luminous compounds for dials (31) silver solder core wire for dial legs in straight length or in coil of diameter 0.4 mm to 1 mm (32) German silver strips of thickness 0.1 mm to 1 mm and width 5 mm to 10 mm (33) Free cutting quality stainless steel rods of diameter upto 5 mm and length upto 3000 mm (34) Polyamide strips of thickness upto 0.10 mm and width upto 15 mm (35) Copper berillium strips in coils of thickness upto 0.35 mm and width upto 25 mm (36) Polished steel strips in coils of thickness 0.05 mm to 0.5 mm and width upto 15 mm (37) Leaded brass rods of diameter 0.5 mm to 10 mm and length upto 3000 mm (38) Nickel silver strips of thickness upto 0.1 mm and width upto 50 mm (39) Titanium copper strips in coils/cut lengths of thickness 0.18 mm to 0.20 mm and width 15 mm to 20 mm (40) Aluminium alloy strips whether or not in coil of thickness upto 0.55 mm and width upto 35 mm (41) Leaded beryllium copper rods of diameter 1 mm to 2.5 mm and length upto 2500 mm (42) Stainless steel pipes of outer diameter 1.8 mm, inner diameter 1.54 mm and length up....
X X X X Extracts X X X X
X X X X Extracts X X X X
....g process) (3) Automatic Drying machine (4) Automatic Lacing machine (5) Automatic Leather perforating and/or Punching machine (6) Automatic Lock-Stitching Cylinder Bed Bartacker (7) Automatic machine to control, to slant and to glue leather straps (8) Automatic Milling machine (9) Automatic Milling-Boring Machine (10) Automatic or semi-automatic hydraulic press (750 tonnes or more) (11) Automatic Padding machine (12) Automatic Spraying machine (13) Automatic Tacks - Reinforce machine (14) Automatic Work Unit for assembling the complete Insole (15) Back Part Moulding machine (16) Band-saw with or without Flier (17) Bandknife Splitting machine (18) Belt Punching and cutting machine (19) Bobbin machine with counter (20) Boot leg ironing machine (21) Bottom Leather Grain Crack Tester (22) Bottom roughing and/or scouring machine (23) Box Stamping machine (24) Buckle Stappling machine (25) Button Hole (Eyelets end) machine (26) Button Sewing machine (27) Button stitch/ Sewing machine (28) Cementing machine (29) Cementing machine and cementing gun (30) Chain Slotting machine (31) Channel Closing machine (32) Channelling and Grooving machine (33) Clicking Board levelling machine (34) Clic....
X X X X Extracts X X X X
X X X X Extracts X X X X
....aulic automatic plating ironing machine (101) Hydraulic Bending machine (102) Hydraulic Fleshing machine (103) Hydraulic Ironing and Embossing Press (104) Hydraulic Scudding machine (105) Hydraulic Setting machine (106) Hydraulic Shaving machine (107) Hydraulic Shearing machine (108) Hydraulic Splitting machine (109) Hydraulic Sulphide applicator (110) Injection Moulding of PVC/TPR Soles, Inserts and Half Soles (111) Injection Moulding press to produce Plastic shoe Lasts (112) Insole Attaching machine (113) Insole Backpart Stiffener Tester (114) Insole Bevelling machine (115) Insole Covering machine (116) Insole moulding machine (117) Ironing and Conditioning machine (118) Kamborian Lasting machine (119) Knife Grinding machine (120) Knife making equipment for cold steel and forged steel (121) Label stitching machine (122) Last Turning machine (123) Lastometer (124) Leather buffing machine (125) Leather cover Cutting machine for Heels (126) Leather Polishing machine (127) Leather rolling machine (128) Lining roughing machine (129) Lining Trimming machine (130) Loop closing machine (131) Loose/ Nailing machine (132) Manual loop cutter (133) Mckay Stitching machine (134) Milling machi....
X X X X Extracts X X X X
X X X X Extracts X X X X
....) Sewing Machine Zig Zag Flat Bed (193) Shank/Sole/Counter reducing machine (194) Shank Rivetting machine (195) Shears for cutting pattern (196) Shears for Iron bars (197) Side Lasting machine (198) Sidewall Roughing machine (199) Skiving machine (200) Slike Fastener Fatigue Tester (201) Snap fasteners fixing machine with or without dies therefor (202) Sole/Heel/Seat Roughing machine (203) Sole Edge Recessing/Shapping machine (204) Sole Levelling machine (205) Sole Stamping/Embossing machine (206) Soling Material Abrasion machine (207) Spiral Cutting machine/Cutting Press (208) Spray Booths (209) Stamping machine for Upper/Lining/Socks (210) Steam Toe Press (211) Stitch Marking machine (212) Strap/Strip Cutting machine (213) Strap Folding machine (214) Stretching and drying machine with or without conveyor and toggles (215) String Lasting machine (216) Strobel type stitching machine (217) Studs Attaching machine (218) Suit Case Stitching machine (219) Tack heel seat lasting machine (220) Tack Lasting machine (221) Tack Side lasting machine (222) Tanning and colouring drums (223) Tapping and seam rubbing machine (224) Testing Equipments, namely :- Flexometer/Upper material flexing m....
X X X X Extracts X X X X
X X X X Extracts X X X X
....e (14) Hosiery yarn dyeing HTMP machine complete with dye kitchen and accessories (15) Friction soft package winders (dye package winders) (16) Yarn drying machine (17) Automatic dyes weighing and dispensing machine (18) Volumetric/Gravimetric measurement liquid chemical station (19) Printing machine-chest/rotary/flat bed (20) Polymerizer steamer equipment (21) Continuous rope/open width washing machine (22) Open width tubular inspection machine (23) Lab dye preparation machine (24) Fasteners Testing Equipment (25) Shrinkage control testing equipment (26) Lab infra Red Dyeing Machine (27) Lab Yarn Dyeing Machine (28) Lab Dyeing Machine (29) Lab Pressing Machine (30) Auto Coner Winder with Splicer and Electronic Clearer with auto doffing system (31) Warping machines with modern yarn tensioning device and pneumatic suction device and other accessories (32) Sizing machines with all accessories (33) Shuttleless looms (Air jet, Water jet, Rapier and Projectile) (34) Drawing in machines (35) Beam knotting machines (36) Sectional warping machines (37) Computer aided designing system for dobby or jacquard (38) Fully automatic grey fabric inspection machines with roll to roll winding having....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ed embroidery pattern making machine with plotter (89) Printing and curing machine (90) Quilting machine; Button and Rivet fixing machine and/or dies thereof (91) Snap fasteners fixing machine and/or siwa thereof (92) Thread cleaning machine (93) Steam press (94) Portable boiler for steam press (95) Steam cabinet (96) Vacuum table (97) Fusing press (98) Dry to dry cleaning machine (99) Stain/spot removing machine/gun (100) Automatic 25-needle shirring/smoking machine (101) Shirt folding machine table (102) Form finisher (103) Collar contour trimmer (104) Spreading machine (105) Shoulder pad attaching machine (106) Shrinkage controlling machines for knitting fabrics (107) Loopdrivers for tubular knitted fabrics (108) Mercerising machines for tubular knitted fabrics (109) Singeing machines for tubular fabrics (110) Pile cutting machines for knitted fabrics (111) Rotating machine fabric rolls to edging (112) Conveyors (113) Smocking machines (114) Calendering machines (115) Tie making machines (116) Labelling machines (117) Laying and cutting machines LIST 7 (1) LSI/VLSI tester (2) Micromanipulators (3) Molecular beam expitaxy system (MBE system) (4) Expitaxial reactors (5) Chem....
X X X X Extracts X X X X
X X X X Extracts X X X X
....tridges for dental use (13) Body contoured self-adjusting electrically operated dental chair (14) Equipment for chrome cobalt work (15) Fibre optic light equipment with attachments for dental work (16) Porcelain furnace (17) Send blasting equipment for dental use (18) Vacuum investing equipment for dental castings (19) Developing tarks for dental X-ray (automatic and ordinary) (B) Ophthalmic equipments, namely,- (1) Projection magnifier for contact lens inspection and verification (2) Radiuscope base curve (for measurement of contact lenses) (3) Contact lens thickness measuring guage (4) Stereozoom microscope for inspection of contact lenses (5) Softometer for measurement of the base curve of soft contact lenses (6) Contact lens lathes (7) Contact lens polishing machines (8) Ophthalmic operating lights and fibre optic lights (9) Exophthalmometer (10) Ophthalmo dynamometer (11) Corneal anesthesiometer (12) Dark adaptometer (13) Glare testing equipment (14) Pantoscope (15) Cryo-lathe (16) Ophthalmic cryo equipments (17) CAM stimulator (18) Roper half foreign body locator (C) Other medical equipments, namely ,- (1) High powered X-ray unit more than 50 KW with special attac....
X X X X Extracts X X X X
X X X X Extracts X X X X
....Xeroradiographic equipment (68) Urological X-ray examination unit (69) Pressure injector with rapid serial changing unit (70) Computerised tread mill (71) Vector cadiograph (72) Polygraph (73) Phonocardiograph and systolic time interval equipment (74) Tonometer (75) Photo-coagulator (76) Lithotome (77) Paediatric resectoscope/audit resectoscope (78) Peritoneoscopes and accessories thereof (79) Extracorporal lithotriper (80) Calibrated thermo compensated/thermostabilised anaesthetic vapouriser (81) Foetal monitor (82) Bipolar coagulator and forceps (83) Electro-encephalo-graphy equipment (84) Doppler carotid scanner (85) Electromyography equipment and accessories thereof (86) Cryosurgery equipment (87) Trans-cutaneous nerve stimulator (88) Filters for extra corporal circulation (89) PET scanner (90) Operating microscope for microsurgery (91) Operating instruments for microsurgery (92) Cardio-vascular catheterisation lab equipment (93) Automatic/laser multi image and multi format cameras (94) Beside arrythmia analyser/monitor (95) High pressure contrast medium injector (96) Thermal printers, black/white for medical use (97) Thermal printers, colour for medical use (98) Optical disc r....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... (123) Hyperthermia machine (124) Polypropylene mesh for hernia repair (125) Dental X-ray machine (126) Digital imaging system for face X-rays (127) Orthopantom ram (O.P.G.) X-rays for jaws (128) Jaw surgery equipment - (a) stryker saws (b) special titanium and tungsten carbide drill bits (c) jaw surgery instruments including special retractors, bone holders (129) ECG transtelephonic recorder/transmitter/recorder-cum-transmitter (130) Linear accelerator (131) Precision delivery device used for administration of insulin with penfill cartridges such as Novopen (D) Other goods, namely, - (1) Dental implant (2) Dental cements (3) Impression materials of all types/alginate/rubber base/silicon base (4) Dental fillings and non-precious metal for crown/bridge/and cast partial denture (a) chrome cobalt/nickel chrome/porcelain bond metal/low fusing technique alloy (b) dental crowns and artficial teeth (5) Gutta-percha points-dental silver amalgam (6) Dental investment of all types/phosphate bond/gypsum bond/plaster and stone (7) Dental X-ray film- intra-oral/extra- oral/panoramic/occlusal (8) Dental porcelain of all types (9) Acrylics for dental use - denture base material heat cure an....
X X X X Extracts X X X X
X X X X Extracts X X X X
....rtz and Special glasses (9) Non-linear crystals (10) Electro-optic and Acousto-optic switches (11) Special materials, namely, High purity gases, Kovar, Alumina and Zirconia fibres, Recrystallised Alumina Tubes, Optical polishing materials, Optical cleaning material, Dyes and Pitch for optical polishing (12) Optical filters LIST 11 (1) Television cameras with portable field video recorders (professional grade) (2) Audio recording equipment (3) Table top post production video editing machines (4) Four source editing controllers to control editing machines (5) 8-channel video mixer/switches (6) Special effect generators for fading and superimposing of text and graphics (7) Time base correctors/Frame synchronisers (8) Broadcast standard 3-D computer graphic systems (9) Professional grade colour video monitors (10) Portable lighting equipment with lamps for shooting in low light situation (11) Professional grade photographic cameras of all formats (12) Dark room equipment including enlargers (13) Computer control editing machines (14) Spares and accessories of abovementioned equipment as permitted by the Deputy Principal Information Officer in the Press Information Bureau in the M....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ide (5) Phosphorous oxychloride (6) Sulphur hexa flouride oxygen (7) Oligo-poly iso cyanate ethyl-acetate solution (8) Colouring ink for fibre (9) Binder of polyurethane or vinyl chloride-vinyl acetate copolymer (10) UV resin-1/UV resin-2 (11) Nylon-12 granules/chips for sheath/loose tube (12) Coloured nylon-12 (13) Fibre reinforced plastic rods FRP (14) Elongated polyethylene tape (15) Polyester tape (16) Nylon thread (17) Polyethylene cord (18) Biaxilly oriented nylon tape (19) Silica tube/rod LIST 15(2) (1) E-glass yarn/roving for FRP (2) UV resin for FRP (3) Complex high molecular weight resin in acrylate solution for FRP (4) Acrylated monomers (5) Photoinitiater (6) Tert butyl perbenzoate (7) Zinc soap of long fatty acid mixture (8) Modified polypropylene (9) Ethylene acrylic acid (EAA) LIST 16 (1) Australia Antigen RIA kit (2) Cardiac catheters with guidewires (3) Clips for aneurysms and clips applying forceps in Neuro-Surgery (4) Cardio vascular sutures (5) Cardio vascular special instruments, namely:- (i) Coronary perfusion cannulae (ii) Electrical or gas operated sternal cutter (iii) High pressure stop cocks and connectors for pressure recording (iv) Vascular b....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... test kits; Enhanced luminescene analysers for AIDS, Hepatitis and other Analytes (38) Iridium wire (39) Anti-HLA sera (AB-CDR) (40) T.P.H.A. Kits and AIDS diagnostic kits (41) Gamma knife (42) Bone Marrow Transplant Equipment including silastic long standing intravenous catheters for Chemotherapy (43) Cell Separator (44) Pressure Transducer and Pressure Amplifier (45) Cell Saver (46) Continuous Ambulatory Peritoneal Dialysis Fluid (47) Craniotome (Pneumatic and Electric Equipment) and Drills (48) Binocular Loupes (49) Intra Aortic Balloon Pump (50) Remote After Loading Brachy Therapy Equipment (51) Dosimetry System (52) Cell Saver Equipment (53) Cell Washer (54) Thawer Equipment for Blood Warming (55) Mammography Unit (56) O2 Concentrator (57) Ventricular Assist Device (58) Pace Maker (59) Activated Clot Time Machine (60) Cobalt Therapy Unit (61) Colour Doppler Ultrasound Scanner (62) SPECT Gamma Camera (63) Deep Therapy Unit (64) Cardiac and Vascular Angiography System including Digital substraction Angiography (65) Pulse Oximeter (66) Blood Gas Analyser (including cartridges, if any), Sodium Potassium Analyser, Auto Analyser for enzymes, drug levels and bio-chemical investigatio....