Excise duty cap on computer software: duty limited to a specified ad valorem amount, excess duty exempted.
Computer software classified in the tariff schedule is exempted from so much of the excise duty as exceeds the amount calculated at a specified ad valorem rate, thereby capping the effective duty payable on that tariff entry and creating a partial exemption under the delegated rule-making power.

Excise duty exemption limits duty on specified audio tapes and unrecorded cassettes to prescribed rates.
The Central Government, under the Central Excise Rules, exempts specified audio magnetic tapes and unrecorded audio cassettes to the extent that excise duty exceeds the amounts set in the Table, superseding the earlier notification; the Table prescribes a specific rate per unit area for tapes used as inputs for cassette manufacture, an ad valorem rate for other tapes, and nil duty for unrecorded audio cassettes.

Exemption for electric motors: excise duty waived when used in manufacture of submersible or mono bloc pump sets.
Exemption is granted for electric motors falling under the tariff heading where such motors are used in the factory of production in the manufacture of submersible pump-sets or mono bloc pump sets; the whole of the excise duty leviable is exempt subject to the condition that the motors are used in the factory of production for manufacture of those pump-sets.

Excise duty exemption for specified medical equipment limits excise liability to a reduced ad valorem rate on listed goods.
Exempts from excise duty beyond a nominal ad valorem threshold specified medical and surgical equipment within Chapters 84, 85, 90 and 94 by notification under rule 8(1) of the Central Excise Rules, 1944. The exemption restricts duty to an amount calculated at the prescribed ad valorem rate and waives any excess for the enumerated dental, ophthalmic and other medical equipment listed in the notification.

Exemption cap on excise duty for computer systems limits levy to a fixed ad valorem rate, excess duty exempted.
Notification under rule 3(1) of the Central Excise Rules, 1944, exempts goods under sub-heading 8471.00 of the Central Excise Tariff Act, 1985 from so much of excise duty as is in excess of the amount calculated at a specified ad valorem rate, and supersedes notification No. 76/87-Central Excises dated 1 March 1987; it thereby caps the effective excise rate on computer systems and peripherals at that ad valorem rate.

Excise duty rate cap on cash registers limits excess duty to a fixed ad valorem rate for lower-value registers.
The notification exempts cash registers of the specified tariff classification and whose individual value falls at or below a notified threshold from that portion of excise duty which exceeds the amount computed at a fixed ad valorem rate, with "value" to be determined under the statutory valuation provisions and eligibility tied to classification and valuation.

Excise duty exemption for specified textile machinery limits excise liability to a reduced ad valorem rate under notification.
Exempts specified textile machines in Chapter 84 from excise duty in excess of a reduced ad valorem charge, limiting payable duty to that lower rate for listed goods: open-end rotor spinning machines, shuttle-less looms (including air and water jet looms), auto cone winding machines and two-for-one twisters.

Exemption for original equipment parts in stationary diesel engine manufacture subject to officer certification and procedural compliance.
Exemption covers specified goods when used as original equipment parts in the manufacture of stationary diesel oil operated I.C. engines, subject to proof to an officer not below Assistant Collector that the goods are intended as such (excluding components specially configured for transport prime movers) and compliance with Chapter X procedures where the goods are used outside the factory. The Table enumerates the covered components including valves, gaskets, nozzles, pistons, rings, gudgeon pins, circlips and filter elements.

Excise duty exemption for specified agricultural, horticultural, and related goods removing levy on listed tariff items.
Notification exempts specified goods under designated tariff headings from the whole excise duty under rule 8(1) of the Central Excise Rules, 1944; the annexed Table lists exempted items concentrating on agricultural and horticultural implements and machinery, certain non-electric household implements and small value stationery accessories, mechanical appliances, and safety equipment such as fire extinguishers.

Excise duty exemption limits set for specified metal goods; excess duty payable above prescribed rates.
The Government prescribes that goods listed in the Table are exempt from so much of the excise duty leviable under the Tariff as exceeds the lesser effective rate stated in the Table, thereby capping duty liability for those described items and reducing duty payable to the percentage or nil rate shown against each described item.

Exemption for steel furniture parts subject to exclusion of specially shaped components identifiable as essential for assembly.
Exemption from excise duty is granted for specified steel furniture parts and for parts of steel office or desk equipment ordinarily manufactured with power, but the exemption does not apply to parts given a special shape or design that makes them clearly identifiable as essential components from which, together with other parts, an article of steel furniture can be assembled with or without bolts and nuts.

Effective rate of duty on specified hand tools set to limit excise liability, exempting duty in excess of a fixed ad valorem threshold.
Notification under rule 8(1) of the Central Excise Rules, 1944 exempts so much of the excise duty on specified Chapter 82 goods as exceeds the amount calculated at the rate of ten per cent ad valorem, thereby setting an effective rate of duty for listed hand tools including saws, files, pliers, spanners, vices, anvils, portable forges, grinding wheels and tool sets.

Excise duty exemption for specified cutlery and razors, capping liability at prescribed effective rates under Central Excise Rules.
The notification, issued under sub rule (1) of rule 8 of the Central Excise Rules, 1944, exempts specified Chapter 82 goods from excise to the extent that duty exceeds the effective rates set in the Table; three categories-razors and razor blades; other cutlery including manicure and pedicure sets; and various spoons, forks and similar kitchen or tableware-are each assigned the same prescribed effective rate, which caps the excise liability on those goods.

Tariff classification amendments broaden chapter-level references and revise excise duty conditions for metal articles and waste.
Amendments replace specific tariff sub-heading references with broader chapter- or heading-level descriptions for various metals and their waste, omit certain Schedule entries, and revise eligibility conditions for concessional treatment of winding wires by specifying qualifying feedstock and requiring prior payment of excise or additional duty and absence of duty-credit claims.

Excise exemption for specified zinc products where use in manufacture or defence purposes meets prescribed conditions.
Exemption from central excise duty applies to specified zinc products in Chapters 26 and 79 when they are used in prescribed manufacturing processes or for defined purposes within qualifying factories, or when transported and used outside the producing factory subject to the procedural safeguards of Chapter X of the Central Excise Rules; certain items manufactured in ordnance factories are exempt when used for defence purposes, and returns of zinc dust to the producing factory may be subject to a period specified by the Assistant Collector of Central Excise.

Excise duty exemption for specified zinc products reduces duty to capped effective rates subject to input duty and credit conditions.
Notification exempts specified Chapter 79 zinc goods by capping effective excise duty at stated rates for listed descriptions, reducing duty to the specified effective rate. The exemption applies only when the goods are made from zinc inputs on which excise or additional customs duty has already been paid and no credit under rule 56A or 57A has been taken. The benefit does not apply to zinc produced by a primary producer (licensed under the Industries (Development and Regulation) Act from ore or concentrates). Domestic stocks are deemed duty-paid unless clearly non-duty-paid.

Excise exemption for specified lead products where factory-use or prescribed procedural and defence-use conditions are met.
Specified lead goods are exempted from central excise duty where conditions apply: lead waste and scrap used within the producing factory for manufacture of lead goods, or used in chemical manufacture if offsite procedural requirements are followed; lead plates, sheets, strips, foils, shells, blanks for tubes and pipes, and lead tubes and pipes manufactured in a Central Government ordnance factory and used for defence purposes in such ordnance factories; and lead wires, each subject to the conditions specified in the notification.

Excise duty exemptions on metal containers limit payable duty to prescribed reduced rates subject to intended-use and manufacturing conditions.
Notification limits excise liability on specified metal containers and base-metal articles by prescribing capped or nil effective duty rates per Table entries, conditional on intended use, manufacturing origin and method, prior duty payment on inputs, non-availability of input-duty credit, and compliance with procedural requirements where use occurs outside the factory of production.

Excise duty rates on aluminium products adjusted, with specified exemptions for primary producers and artificial limb inputs.
The Central Government exempts specified aluminium goods from that portion of excise duty exceeding the commodity-specific rates set out in the annexed Table, covering unwrought aluminium, scrap, powders, wire-rods, profiles, wire, circles, plates, sheets, strip, foil, tubes, pipes and cast articles. The notification prescribes distinct percentage rates and per-tonne amounts for particular categories, provides a conditional reduction for strips used to make exempt pipes subject to Chapter X procedural compliance, and defines primary producer for the purpose of these exemptions.

Excise duty rates and targeted exemptions on aluminium products clarified, subject to manufacturing inputs, end use and procedural conditions.
The notification sets effective rates of excise duty and conditional exemptions for specified aluminium products under Chapter 76, exempting duty in excess of the stated effective rates where conditions are met. Relief is largely conditioned on prior duty payment on inputs or predecessor aluminium forms, in factory use for manufacture of specified goods, compliance with Chapter X procedures when use is outside the factory, and certification by the Assistant Collector for certain end uses; provisos deny relief to primary producers and where input duty credit has been availed.