Manufacture versus reconditioning: substantial machine conversion defeats Rule 173H relief, and valuation cannot exceed assessed components.
Rule 173H permits retention or receipt of duty-paid goods for re-making, reconditioning or similar work only where the process does not amount to manufacture. A converted honing machine was held to have undergone substantial alteration, including changes to spindle speed, addition of a longitudinal table and adaptation for a new use, so the machine received and the machine cleared were not the same in form, capacity or capability. The process was therefore treated as manufacture, and Rule 173H benefit was unavailable. On valuation, the assessable value was confined to the elements actually adopted in assessment; the full landed cost of the old machine was excluded, and packing charges were not added where they were not part of the original computation.
Issues: (i) Whether the conversion of the imported honing machine into a machine capable of honing both cylinder blocks and brake drums amounted to manufacture so as to exclude the benefit of Rule 173H of the Central Excise Rules, 1944. (ii) Whether the assessable value could include the landed cost of the old machine and the packing charges in addition to the modification and service charges.
Issue (i): Whether the conversion of the imported honing machine into a machine capable of honing both cylinder blocks and brake drums amounted to manufacture so as to exclude the benefit of Rule 173H of the Central Excise Rules, 1944.
Analysis: Rule 173H permitted retention or receipt of duty-paid goods for re-making, refinement, reconditioning or similar processes only where the process did not amount to manufacture. The decisive test was whether the goods were cleared in the same form in which they were brought into the factory. Here, the machine was substantially altered: its spindle speed was changed, a new longitudinal table was added, and the base and cylinder-block adaptation fixture were modified so that it became suitable for a new use. The machine received and the machine cleared were not the same in form, capacity, or capability.
Conclusion: The process amounted to manufacture and the benefit of Rule 173H was not available.
Issue (ii): Whether the assessable value could include the landed cost of the old machine and the packing charges in addition to the modification and service charges.
Analysis: The appellate authority had taken the depreciated value of the old machine along with the modification and service charges as the basis for valuation, and had specifically rejected inclusion of the full landed cost of the machine. The adjudicating authority had not actually added packing charges while computing the assessable value, although they were mentioned in the order. Since there was no cross appeal by the Revenue, the remand could not enlarge the demand beyond what had been included in the original computation.
Conclusion: The full landed cost of the old machine was not includible, and the packing charges of Rs. 50,000 were also excluded from the assessable value.
Final Conclusion: The appeal failed on the main issue of manufacture and valuation, but relief was granted to the limited extent of excluding the packing charges from the assessable value.
Ratio Decidendi: Under Rule 173H, re-making or reconditioning is outside manufacture only if the goods are cleared in substantially the same form in which they were received; where the process changes the machine's form, capacity, and end-use, it constitutes manufacture, and valuation cannot be expanded beyond the components actually adopted in the assessment.