Testing without manufacture and removal of inputs as such triggered Cenvat credit reversal, extended limitation, and penalty.
Routine testing and inspection of traction motors and vacuum circuit breakers did not amount to manufacture because the activities caused no lasting change in character, identity, or functionality and produced no new product; the clearances were therefore treated as removal of inputs as such. In that situation, Rule 6(3)(b) of the Cenvat Credit Rules did not apply, because it concerns final products cleared without duty, and liability arose instead under Rule 3(4)/Rule 3(5) for credit availed inputs removed as such. Misdescription of the clearances in returns constituted suppression and misdeclaration, supporting extended limitation and equal penalty under Section 11AC and the corresponding Cenvat Credit Rules.
Issues: (i) Whether testing and inspection of traction motors and vacuum circuit breakers in the factory amounted to manufacture so as to prevent the clearances from being treated as removal of inputs as such; (ii) whether payment made under Rule 6(3)(b) of the Cenvat Credit Rules, 2002/2004 was sufficient, or whether Rule 3(4)/Rule 3(5) applied on removal of credit availed inputs as such; (iii) whether the demand, extended period, and equal penalty were sustainable.
Issue (i): Whether testing and inspection of traction motors and vacuum circuit breakers in the factory amounted to manufacture so as to prevent the clearances from being treated as removal of inputs as such.
Analysis: The goods received from the sister units were already complete and finished goods. The activities carried out were only routine, dielectric, characteristics, insulation resistance, and similar tests to verify working condition and quality. No process brought about any lasting change in the character, identity, or functionality of the goods, and no new product emerged. Note 6 to Section XVI of the Central Excise Tariff Act, 1985 was inapplicable because there was no conversion of incomplete or unfinished goods into complete or finished goods.
Conclusion: The process did not amount to manufacture, and the clearances were correctly treated as removals of inputs as such.
Issue (ii): Whether payment made under Rule 6(3)(b) of the Cenvat Credit Rules, 2002/2004 was sufficient, or whether Rule 3(4)/Rule 3(5) applied on removal of credit availed inputs as such.
Analysis: Rule 6(3)(b) applies when final products manufactured using common inputs are cleared without payment of duty. Here, the goods were not final products manufactured at the factory, but credit availed inputs cleared without undergoing manufacture. In that situation, the governing provisions were Rule 3(4)/Rule 3(5), under which the amount equal to the credit taken on clearance was payable. The amounts earlier paid under Rule 6(3)(b) did not discharge that liability.
Conclusion: Rule 6(3)(b) was inapplicable, and liability under Rule 3(4)/Rule 3(5) was correctly fastened.
Issue (iii): Whether the demand, extended period, and equal penalty were sustainable.
Analysis: The clearances were shown in returns as manufactured products despite the absence of manufacture, and the manner of clearance was not disclosed to the department. That amounted to suppression and misdeclaration, justifying invocation of the extended period. As the duty liability was sustained, the conditions for equal penalty under Section 11AC of the Central Excise Act, 1944 and the corresponding Cenvat Credit Rules were also satisfied. The adjudicating authority had already given credit for the amount paid and demanded only the balance.
Conclusion: The demand for the balance amount, the extended period, and the equal penalty were upheld.
Final Conclusion: The appeal failed in its entirety, and the impugned order confirming the balance demand with interest and penalty was sustained.
Ratio Decidendi: Routine testing that does not bring about a new product or any enduring change in the goods does not constitute manufacture; where credit availed inputs are cleared as such, Rule 3(4)/Rule 3(5) applies rather than Rule 6(3)(b), and suppression of the true nature of clearance justifies extended limitation and penalty.