Galvanised flanges with rubber gaskets: specified input proportions and import-use verification apply under FTP norms. Specified input proportions for 2' galvanised flanges with rubber gaskets require HR/CR sheets/coils/strips at 2.10 kg ungalvanised steel per kg of finished product; synthetic rubber (SBR/PBR/Nitrile/EPDM) at 0.700 kg per kg of gasket; zinc at 0.04 kg per kg of steel; and resistant lacquer at 1.42 kg per kg content. Applicants must ensure imported goods are those actually used or required in manufacture, and these proportions are used to determine permissible imported input quantities under FTP norms.
Cases where this provision is explicitly mentioned in the judgment/order text; may not be exhaustive. To view the complete list of cases mentioning this section, Click here.
Provisions expressly mentioned in the judgment/order text.
Galvanised flanges with rubber gaskets: specified input proportions and import-use verification apply under FTP norms.
Specified input proportions for 2" galvanised flanges with rubber gaskets require HR/CR sheets/coils/strips at 2.10 kg ungalvanised steel per kg of finished product; synthetic rubber (SBR/PBR/Nitrile/EPDM) at 0.700 kg per kg of gasket; zinc at 0.04 kg per kg of steel; and resistant lacquer at 1.42 kg per kg content. Applicants must ensure imported goods are those actually used or required in manufacture, and these proportions are used to determine permissible imported input quantities under FTP norms.
Full Summary is available for active users!
Note: It is a system-generated summary and is for quick reference only.
TaxTMI 
of 
Join Channel
TaxTMI 
