Starter motor armature inputs must follow prescribed component weights and be those used in the export product. The Starter Motor Armature for Low Speed Vehicles entry (C1106) is suspended by Public Notice No. 03/2024-25 and includes prescribed input-output norms: copper electrolytic wire/bar/rod 0.8 kg; CR steel sheet 0.5-1 mm 3.5 kg; free cutting steel rod ENIA/SAE-8620 or equivalent 5-36 mm dia 1.5 kg; solder tin 80/20 0.02 kg; polyester film 25-200 micron 0.04 kg, establishing the quantified component composition for one unit of the armature.
Cases where this provision is explicitly mentioned in the judgment/order text; may not be exhaustive. To view the complete list of cases mentioning this section, Click here.
Provisions expressly mentioned in the judgment/order text.
Starter motor armature inputs must follow prescribed component weights and be those used in the export product.
The Starter Motor Armature for Low Speed Vehicles entry (C1106) is suspended by Public Notice No. 03/2024-25 and includes prescribed input-output norms: copper electrolytic wire/bar/rod 0.8 kg; CR steel sheet 0.5-1 mm 3.5 kg; free cutting steel rod ENIA/SAE-8620 or equivalent 5-36 mm dia 1.5 kg; solder tin 80/20 0.02 kg; polyester film 25-200 micron 0.04 kg, establishing the quantified component composition for one unit of the armature.
Full Summary is available for active users!
Note: It is a system-generated summary and is for quick reference only.
TaxTMI 
of 
Join Channel
TaxTMI 
