TaxTMI 
TaxTMI 
Launch of Indian Customs EDI System- (ICES 1.5) for Imports and Exports, at MULDWARKA PORT (INMDK1)
X X X X Extracts X X X X
X X X X Extracts X X X X
....nue to be attached with the assessed copy of the Bill of Entry when the same is presented in the Import Shed for the clearance of goods. The requisite documents also can be called for by the Appraising Group, if required, while acting on the Bills of Entry. There are certain pre-requisites for filing the electronic declarations which are required to be complied with before filing the Bill of Entry. 1.1 Registration of IE-Code of the Importer (i) IE-Code is being issued to the importers by DGFT, details of which are transmitted online to the x from the DGFT as to whether their IE-Code has already been transmitted to ICES. If their IE-Code has not been transmitted to the ICES by the DGFT, they should first get the same transmitted from DGFT, failing which they will not be able to file Bill of Entry electronically for the clearance of the imported goods. (ii) In case the IE-Code is registered for exports, the same shall hold good for imports also. The DGFT has notified certain generic Codes for certain classes of importers in the EXIM Policy and exempted them from taking a specific IE Code. Such importers should use respective codes for filing the Bill of Entry. H....
X X X X Extracts X X X X
X X X X Extracts X X X X
....surance, commission, etc., codes specified against the respective currencies indicated in the list of currency codes appended with this Public Notice should only be used. Incorrect code will result in incorrect conversion of Indian Rupees. List of Currency Codes attached as Appendix 4. 1.6 Units of Measurement Codes Against any quantity of goods, appropriate Code indicated against the respective measurement in the list appended with this Public Notice should only be used in the Bill of Entry and IGM, as the case may be .It is further informed that if UQCs, other than the Standard UQCs of the customs tariff are used, the B/E may not get any facilitation in RMS. Reference is also invited to the CBEC Circular No. 26/2013 -Customs, dated 19/07/2013, where adherence to Standard Unit Quantity Codes as prescribed in the Customs Tariff Act has been prescribed. List of Measurement Codes attached as Appendix 5. 1.7 Country Codes: Wherever in the Bill of Entry or IGM, etc., a reference to country name is required to be made appropriate Code of the country as indicated in the list of country codes appended to this Public Notice should only be used. List of Country Codes attached as....
X X X X Extracts X X X X
X X X X Extracts X X X X
..... 10 (vii) Queries (including reply feeding): Nil - for 3 queries and Rs. 10 for each query thereafter. (viii) Printing check list: NIL (ix) Printing of assessed documents (SB/BE/ OOC/ LEO/Challan etc): NIL II. SERVICE CHARGES FOR „RES‟ DOCUMENTS ICEGATE or any other manner of Remote EDI filing: (i) Printing of Document: Rs. 30 [for the first 50 pages and Rs. 10 for every 10 subsequent pages or parts thereof (documents refers to the set of papers, which get printed in one command at any stage of processing)] (ii) Query Printing: Rs. 10 (iii) Amendments fee to Bill of Entry (for block of five items):Rs.20 (iv) Amendments fee to Shipping Bill (for block of five items):Rs.10 (v) Amendment fee - Each Additional block of five items: Rs. 10 (vi) Amendment fee - Other documents: Rs. 10. (vii) Printing Check list: Rs. 10 Note 1:- The above charges are excluding Service Tax. The vendor shall collect the service tax from trade at the prevailing rates and shall make the payment of the Service Tax to the Govt. exchequer. Note 2:-The above charges include dat....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... (ii) All such amendments made after grant of Entry Inwards will require Assistant Commissioner (Import)'s approval. (iii) IGM messages to custodians would be sent at the time of grant of entry inwards instead at the time of online submission, so that substantially complete IGM is sent to custodian. 3. Cargo/Goods Declaration The Importer or the Customs Broker, as the case may be, can file electronic Bill of Entry by data entry at the service centre operator or by transmitting the details in specified file format through ICEGATE from his premises. 3.1 Filing through Service Centre (i) The Customs Broker/Importer should furnish information in „Annexure C' and present the same to the service centre operator along with copy(ies) of import invoice and packing list. Details of information in Annexure „C‟ should be correct, complete and legible. Incorrect and invalid entries may get rejected on entry of data. The Service center shall accept the declarations in Annexure C during the working hours of Port. The system would accept data entry of Annexure „C‟ only if it finds that the SMTP No. and Bill of Lading matches the....
X X X X Extracts X X X X
X X X X Extracts X X X X
....f entry of data, the system shall assign a Job No. and generate a Check List which is a draft Bill of Entry. The service centre operator shall print a copy of the Check List and hand over the same to the Customs Broker/Importer. The Customs Broker/Importer shall check the correctness of the data entered in the system. If any error is noticed, the error shall be circled in bold ink and correct detail should be written. The corrected check list duly signed by the Customs Broker/Importer should be handed over to the service centre operator for entry of corrected data. The Operator shall make corrections in the corresponding data and hand over the revised checklist to the Customs Broker/Importer for re-confirmation. This process would be repeated till the Customs Broker/Importer signs a clean checklist in token of correctness of the entered data. (ix) The Operator shall submit the authenticated electronic checklist to the system. The system will then generate a B/E. No., which would be endorsed on the printed checklist and returned to the Customs Broker/Importer. The Bill of Entry No. shall be in a running serial number of all the Custom Houses operating on consolidated ICES 1....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... (v) The Customs officers will be able to identify on the system whether a particular electronic document has been filed after signing with Digital Signature Certificate or not; (vi) On successful submission of data from their premises the ICES will generate Bill of Entry Number and return message of Bill of Entry No. If invalid data is entered an error message shall be generated and no B.E. No. shall be generated. In case of remote filing of Bill of Entry the Customs broker /Importer has to ensure correctness and validity of data entered failing which the data will either be rejected by the ICES or incorrect information shall be incorporated in the submitted Bill of Entry which shall lead to problems of amendments. Remote EDI filing software from NIC website link which has been provided at ICEGATE website. Software of NIC is free of charge. (vii) The instructions specified in 3.1 (iii) to (vii) may be kept in mind while Filing in RES software too. 3.3 Self Assessment The bill of entry shall be deemed to have been filed and self-assessment of duty completed when, after entry of the electronic declaration in the Indian Customs Electronic Data Interchange ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....of Entry will be taken up by the appraising officer only on receipt of the required documents. (iv) Movement of Bills of Entry from one officer to another takes place automatically in a pre-determined workflow basis depending on roles and jurisdiction assigned to them. During the processing of Bill of Entry, the officer concerned may raise Query to the importer for further clarification/information. The Query on approval by the concerned AC/DC shall be transmitted to the importer for online reply. Such a Bill of Entry on which query has been raised, is automatically pulled out of assessment queue till reply online/through service center is received from the importer. 4.1 RMS facilitation. Facilitation of Bills of Entry in respect of certain goods using RMS for faster clearance of such goods Bills of Entry in respect of the items under RMS facilitation would be assessed for risk by the System immediately on their submission and a print out of the assessed Bill of Entry along with 3 copies of TR-6 challans will be made available to the Customs Brokers/ Importers for payment of duty and getting the goods examined if required, and for out of charge. In so far as the N....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... „Examination Order‟ at the „Service Centre‟ or in his office, as the case may be. (ii) After the examination is completed, the Import Shed Examiner/Inspector and Appraiser/Superintendent shall write the examination report on the first check copy of the Bill of Entry (Hard Copy of B/E) and enter the examination report in the system. The Shed Appraiser/Superintendent shall transfer the B/E to the Appraising Group. The Customs Broker/Importer shall present the first check copy of the Bill of Entry on which examination report has been written along with the original invoice and other import documents necessary for assessment to the concerned Group Appraiser/Superintendent. The Assessing Officer, if satisfied, shall complete the assessment of B/E in the system. After assessment, the Bill of Entry shall move in the system as in the case of second check assessment. The Customs Broker/Importer shall take print of assessed copy of the Bill of Entry and TR-6 challan and shall deposit duty amount with the designated bank. 4.4 Audit After completion of assessment from the Assessing Officer, the B/E will be moved to the Auditors screen electronically for ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....de the Delivery Order electronically in mutually agreed formats and they are not required to visit either of the offices. Secure electronic transmission of Delivery order between shipping lines/consol agents and the custodian will enhance the security and transparency of the cargo as well as expedite the clearance of the cargo. Please refer CBEC Circular No. 24/2015 dated 14/10/2015 regarding Improving Ease of Doing Business - Issuance of Electronic Delivery Orders. 6. Examination of Goods 6.1 After examination order in the case of First Check Bill of Entry, after assessment in the case of duty free import where duty assessed is zero and after payment of duty assessed with interest(if any) in case of second check Bill of Entry, the Bill of Entry shall move to the Examination section for goods registration. (i) The Customs Broker/Importer shall present the documents, as per the list below, (the documents should be arranged in a file cover in the following order):- a) Assessed copy of Bill of Entry b) Copy of Delivery Order& Bill of Lading c) Invoice in original d) Packing List in original e) Certificate of origin, in origin....
X X X X Extracts X X X X
X X X X Extracts X X X X
....the Customs at the time of giving, out of charge. Hence, only the certified photo copies of Delivery Order, Master Bill of Lading, House Bill of Lading should be attached instead of originals. 6.4 On the basis of the examination report, the Appraising Group may revise the assessment or raise a further query to the importers, if necessary. 6.5 After completion of the examination of the goods, if the Shed Appraiser/ Superintendent are satisfied that the requirement of Section 47 of the Custom Act, 1962 have been complied with, he shall give, Out of Charge for the Bill of Entry on system. 6.6 After the out of charge order, the system will generate print of Importer's copy and Exchange Control copy of the Bill of Entry along with 3 copies of Order of Clearance. Print of the same shall be obtained from the designated computer terminal. The print copies of the Bill of Entry shall bear the Order of Clearance number and name of the examining Appraiser/Supdt. The Importer's copy of the Bill of Entry along with one copy of the order of clearance will be attached to the Customs copy of the Bill of Entry retained by the Shed Appraiser/Supdt. The importer shall present the remaining tw....
X X X X Extracts X X X X
X X X X Extracts X X X X
....duty challan will be printed along with the revised assessed Bill of Entry. 8.2 After Out of Charge Order, no amendment shall be allowed in the Bill of Entry. However, in case amendment is warranted after Out of Charge Order but before delivery of goods, the System Manager can cancel the out of charge Order in the system. The original prints of the Importer's copies and Exchange Control copies of the Bill of Entry shall be retained by the System Manager in a file. After fresh Out of Charge Order, new prints of the copies of Bill of Entry shall be given. 9. Re-assessment Any time after assessment and before Out of Charge Order, a Bill of Entry can be recalled and reassessed and put to reassessment by the AC/DC concerned, if it so warranted for any reason. 10 Advance Noting Advance B/E can also be filed in the ICES before the arrival of the vessel. In such cases, a B/E may be presented before the delivery of the import manifest, if the vessel by which the goods have been shipped is expected to arrive within 30 days from the date of presentation. The Customs Broker/ Importer may file an Advance B/E if he has the copies of the Bill of Lading and the invoice. The B/E woul....
X X X X Extracts X X X X
X X X X Extracts X X X X
....claiming exemption under DEPB Exemption Notification 034/97-Cus., dated 7.04.1997 against a DEPB, the license in question is required to be registered in the import system. The officer designated by the Asstt./Dy. Commissioner to register the DEPB in the system shall ensure that verification of DEPB with reference to the exports on the basis of which DEPB is issued by DGFT has been done prior to its registration in imports. (ii) All importers/CHAs are advised to ensure that their IEC details with PAN have been transmitted by DGFT to the Customs at the time of obtaining the DEPB. The Customs Broker/Importer shall furnish details of DEPB license in the pro-forma given as ANNEXURE A. (iii) The designated officer shall make data entry of the DEPB details in the system. After entry of data, a checklist will be printed. The DEPB holder shall verify the details of DEPB in the checklist sign the check list and return the same to the officer. The officer shall then complete the registration process in the System. After the DEPB is registered in ICES, a "registration number" shall be generated by ICES which will be endorsed on the face of the original DEPB in bold figures w....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... check list of TRA. The check list shall be verified by the DEPB holder. If the particulars are correct the check list will be signed by the DEPB holder and returned to the proper officer who will exercise the option for issue of TRA in the System. The System shall generate three copies of the Release Advice titled as: 1. Customs copy for port of issue (office copy), 2. Customs copy for port of clearance and 3. Importer's copy. (iv) The office copy for port of issue shall be retained by the TRA issuing Customs Station and placed in the respective TRA file. Customs copy for the port of clearance will be dispatched to the respective Customs Station and the importers copy of TRA shall be handed over to the applicant. (v) The requirement of production of original DEPB license with incoming or outgoing TRAs at the respective port of clearance shall continue as per the instructions issued from time to time in this behalf. 11.5 Re-credit of unutilized Release Advices Any unutilized credit in the Release Advice may be re-credited to the DEPB by the Assistant/Deputy Commissioner. A certificate of unutilized portion shall be generated at the....
X X X X Extracts X X X X
X X X X Extracts X X X X
....e debited, DEPB wise against an item S. No. of an invoice, will also be printed. The importers/ Customs Brokers should check the details of DEPB No. carefully to ensure that only that DEPB would be debited which he intended to do so. If the entries are correct, the checklist may be returned to the data entry operator for submission of B/E in the System. Errors, if any, noticed may be got corrected by the data entry operator. 11.8 Submission of B/E On submission of the B/E in the System, an UN-ASSESSED copy of the B/E will be printed by the System containing statement of debit of DEPB for export FOB and duty amount in respect of each item of an invoice for which exemption is claimed against DEPB. 11.9 Assessment of B/E (i) The un-assessed copy of the B/E along with all the original import documents and all the DEPB license/scripts in original indicating total amount of duty credit and export FOB utilized, in the debit sheet attached to the scrips, should be presented to the import Appraiser/Superintendent for assessment and signatures on the debit sheets of the DEPB scrips. The Appraiser/Supt. will retrieve the B/E on screen and assess the B/E in respect of all the....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ng which the system will not accept the declaration for the B/E. In case the importer desires to utilize the DEPB for part of the quantity of an item in the invoice, he may split the quantity of that item and prepare the declaration accordingly. 11.11 Debiting of DEPB against Manual B/E (i) If a Bill of Entry is processed manually, importers may choose to avail the exemption under the DEPB Scheme and get the DEPB debited for exempted amount of duty. In such cases, manual B/E will be assessed as usual. After assessment, the amount of duty forgone due to exemption under DEPB and the CIF of goods imported being cleared against DEPB will be computed manually in respect of each DEPB scrip. (ii) The designated officer in the assessing group will debit the original DEPB. He will also enter the amount of duty foregone and the CIF of the exempted goods in the System, in the respective field of duty credit and export FOB. The debit screen can be accessed through the DEPB Registration Number. After debiting, the System will print the statement of debits of the DEPB in triplicate. The copies of this print will be attached with the manual B/E, DEPB file and DEPB scrip. Impo....
X X X X Extracts X X X X
X X X X Extracts X X X X
....e before presenting to Customs. (ii) In pursuance of CBEC's Circular No. 11/2007 dated 13th February, 2007 and Circular No. 3/2009 dated 20th January, 2009 issued from F. No. 605/210/2005-DBK and F. No. 605/70/2008-DBK respectively, a procedure for online transmission of Shipping Bills and Licenses/Authorizations issued under Duty Entitlement Pass book Scheme (DEPB), Duty Exemption Scheme (DES) and Export Promotion Capital Goods Scheme (EPCG) from DGFT to Customs and vice versa through an Electronic Message Exchange System is in operation at all EDI Ports/ICES locations. (iii) The licenses, which have already been partially utilized, will be registered in the system only for the balances available. (iv) After successful entry of details, a check list will be printed by the registration clerk and given to the license holder for confirming the correctness of the data entered. Registration clerk will make correction, if any and will return the same to the license holder. It is the sole responsibility of the license holder to verify and confirm the correctness of the data entered before proceeding further. License should not be sent by post or through a lette....
X X X X Extracts X X X X
X X X X Extracts X X X X
..... The officer will compare the details entered in the system with the original license/TRA. After satisfying himself with its correctness, Officer will submit the license in the system on the basis of the job number of the check list. The system will generate a license Registration. No. This registration number and date should be endorsed in bold on the original license/TRA. After registration, the documents may be returned to the Importer and copies thereof may be kept in the office file for record. TRA will be registered only on the basis of Customs copy of the TRA. After registration, Customs copy and Importer's copy of TRA will be defaced by the officer. 12.5 Issuing TRAs Transfer Release Advice will be issued for utilization of a license at any other Customs station. No TRA needs to be issued for Customs location operating of ICES Version 1.5. TRA shall be issued only for non-ICES location. All TRAs against the licenses registered in the system shall only be generated from system. Details for obtaining Release Advice shall be furnished in the Format given at Annexure-D. Data entry will be done by the registration clerk. A check list will be printed for verifying the corr....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... will give credit to quantity or value in the case of increase and will debit the quantity or value in the case of reduction. Therefore, only incremental or decremental quantity or value should be entered in respect of increase or reduction. License status code at the time of registration will be „0‟. The license, if suspended or cancelled after registration, the officer shall amend the status code to 2, 3 and 4 for cancellation, suspension and re-instatement respectively. 12.9 Filing of Bill of Entry (i) License Regn. No., Regn. Date details, value and the quantity should be furnished in respective column at S. No. 39.E of the Annexure C. (ii) Unit of measurement of qty. will be the same as per the license. In case the unit of measurement in the invoice is different than the one in the license, for the purpose of debit in the license the qty should be converted in to same unit of measurement as in the license. For spare parts against EPCG license, S. No. of item will be „0‟ therefore, for availing benefits of exemption notification in respect of spares Item S. No. „0‟ should be indicated in column 9 of the Format indicated a....
X X X X Extracts X X X X
X X X X Extracts X X X X
..... If the Assessing officer is satisfied about the eligibility of exemption under related notification and the license is otherwise valid to cover the goods in question, he may assess the B/E on system. The Assessing officer can remove the notification and deny the benefits of exemption. The debits of license will automatically reverse when exemption notification is denied. The procedure of assessment will be similar to DEPB imports. (iv) In respect of a manually assessed Bill of Entry, details of value and quantity will be debited in the system by the Appraiser at the time of assessing a B/E & a print of details of debit will be taken for records. 12.11 Printing of the Assessed B/E After assessment, the printout of assessed copy of the B/E will be taken by the Importer/Customs Broker from service center. The printout of B/E will contain duty-paying challan if duty is payable and statement of debit of license for value/ qty and debit of Bond for duty foregone in respect of each item. The figures of these debits should be endorsed on the hard copy of the license. 12.12 Examination/Out of Charge Procedure for goods registration, examination, out of charge and prin....
X X X X Extracts X X X X
X X X X Extracts X X X X
....tely indicated in Para 21.2 of this Public Notice. The importer should indicate in the format, the type of Bond as "EO" for 100% EOUs and indicate details of the Bond No. or the Central Excise certificate, as the case may be. If Bond or Central Excise Certificate are not indicated it would be „N‟, i.e. NONE. The data entry operator shall enter the related option „Y‟ or „C‟ and enter the details of the Bond or the certificate, as the case may be, in the respective field in the system. (iii) In the field of claim of assessment, normal details shall be indicated. However, in the fields of "Additional information for claiming benefits under specified exemption schemes", in Col.(I) the prescribed Exim code for the relevant scheme related to imports like EOU/STP/EHTP would be required to be indicated. The Exim codes for the various schemes have already been notified in the Handbook of Procedures issued by the DGFT in column No 2.The relevant applicable exemption notification No........./Year..........with Sl.No. of item in the notifications is required to be indicated against the respective item. The data entry operator shall enter the code of....
X X X X Extracts X X X X
X X X X Extracts X X X X
....Entry can be obtained. The details of the Bond / BG shall be printed on the Bill of Entry where neither Bond is debited nor is a central excise certificate indicated, the system will print the Bond / BG requirements as specified by the Appraiser. (iv) In case the importer has executed the Bond with the central excise authorities, he shall produce the procurement certificate issued by the central excise officer to the assessing officer along with the un-assessed copy of the Bill of Entry. Assessment of the Bill of Entry would be done after due verification of all the concerned documents. System would enable monitoring of the movement of the goods by monitoring the debits against the bond value/ CX certificate value through appropriate MIS reports. Under the present set up, the MIS reporting is not operational through EDI system and the same is being done manually by obtaining the re-warehousing certificate from Central Excise. (v) After completion of the assessment, the Bill of Entry shall be put to Bond queue for execution / debiting of Bond. Where any duty amount has been assessed, the duty shall be deposited in the bank as usual. Unless the Bond Officer complete....
X X X X Extracts X X X X
X X X X Extracts X X X X
....rs and generation of Warehouse Code in the system. Type of Bill of Entry (H) For Home Consumption (W) For Warehousing (X)For Ex-Bond: Warehouse B/E No ----,DT--- and Warehouse Code (i) Warehouse Code consists of 4-digit location code; 1-digit warehouse type; and 3-digit serial number of warehouse, e.g. WFD61001. If no code is assigned „other‟ to be used as code - WFD6O001). INVOICE PARTICULARS For Ex-Bond B/ENo---------Invoice S.No.-----------in Warehouse B/E item of Import intended to be Ex-Bonded Item Quantity of item intended for ex-Bond S.No. in invoice (ii) On out of charge of a Warehouse B/E, the system will create a ledger of quantity in respect of all the items included in Warehousing B/E. For the purpose of filing Ex-Bond B/E in the system, details of Customs Broker& the Importer will be entered as usual. In the field of Type of B/E „X‟ will enable for entry of Ex-Bond B/E. A window will pop up for Warehouse B/E No. & date. On entry of Warehousing B/E No & date, the system will capture all the other details from the Warehousing Bill of Entry.....
X X X X Extracts X X X X
X X X X Extracts X X X X
....er payment of duty and completing any other requirement of debiting of Bond, license, etc. the assessed Ex-Bond B/E along with all other documents should be presented to the Superintendent authorized to give Out of Charge of the Ex-Bond B/E. The Superintendent shall verify that:- a) The particulars in the Ex-Bond B/E correspond to the Bond register maintained in the Bond Section; b) The goods are being cleared within the validity period of the Bond, interest, if any, on the Warehoused goods as chargeable under Section 61of the Custom Act, 1962 as per the rates specified under Section 47(2) of the Act ibid and/or any charges including fine/penalty payable, as provided under Chapter IX of the Customs Act, 1962 have been paid; c) The rate of duty has not undergone any change after assessment and the out of charge. In case any change has taken place after assessment in the tariff or exemption structure having bearing on assessment, the B/E will be referred to the concerned Appraiser/Superintendent for re-confirming the correctness of the assessment. The Appraiser/Superintendent will re-assess the B/E, if so required. The system after re-assessment will genera....
X X X X Extracts X X X X
X X X X Extracts X X X X
....mber has not been entered at the time of data entry of B/E. Therefore, all the importers who are claiming benefits of such exemption notifications should get respective Bond accepted and registered in the system as continuity Bond of that category in respect of each notification separately. The Bond registered for one notification cannot be utilized for another notification. Bond Codes for the types Bond are as under Bond type Bond code End use Bond EU Undertaking UT Re-export Bond RE 17. Certificate from CEX Authorities (i) Where the exemption notification provides for production of a certificate from the jurisdictional Central Excise authorities in terms of the Customs (Import of Goods at Concessional Rate of Duty for Manufacture of Excisable Goods) Rules, 1996, the same should also be registered in the system. For this purpose, the certificate obtained from the central excise office shall be ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ndertaking would be closed by the AC/DC. When the conditions of the Bond/undertaking are complied with, the AC/DC will enter the Bond No., the system will display all the Bs/E and related Item S.Nos. in respect of which the Bond has been debited. If the conditions of the Bond have been satisfied, the option to close the Bond may be exercised, item by item. When all the items against which respective Bond has been debited are closed, the Bond can be cancelled. However, if the Sr No. of items are closed and the Bond is not cancelled, the same will continue to be used if there is a balance in Bond amount and validity period has not expired. All the documents on the basis of which the items are closed and the Bond is cancelled will be kept in the related Bond file for the purposes of record. 20 Assessment of Goods under Chapter 55 of Customs Tariff (i) In case of goods of aforesaid Chapter, under certain sub-headings where the duty of Customs under the First Schedule to the Customs Tariff Act, 1975 is chargeable on the basis of value or weight in Kgs. or area in SQM of the textile fabrics covered under the said sub-headings and the duty chargeable will be the highest among ....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... Bond (i) The Bond module provides for registration of all Bonds / Undertakings, Bank Guarantees, Sureties, etc. in the system. The importer shall furnish the following details for registration: - Bonds / Undertakings 1. IEC 2.Bond Type 3. Bond Amount * 4.Revolving / Specific 5.Date of Bond 6.Date of Expiry 7.Date of enforcement 8.Whether BG Y/N 9.Surety Y/N 10. Cash Deposit Y/N 11. Remarks * For Bonds already executed, the existing balance to be captured as opening balance in the Ledger BG Details 1. Serial No. (As given by the Bank) 2. Bank branch code 3. Bank name 4. BG amount 5. BG date 6. Expiry date of BG 7.Date of enforcement 8.Remarks Surety Details 1. Serial No. (As given by the party) 2. Surety Name 3. Address 4. Identification particulars of surety (Customs Broker code, Chartered Accountant Registration No. etc.) 5. Remarks Cash Deposit 1. Challan No. 2. Date 3. Amount 4....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... Certificate Number is declared, EOU Bond is not required. (ii) Appraising The Appraising Officer has the option to ask for Bond as the condition of assessment. The following type of Bonds can be opted: • Provisional Duty Bond - General • Test Bond • End Use Bond / Undertaking • Transit Bond • Provisional Duty Bond - Project Imports • Extra Duty Deposit • EOU Bonds • Warehouse Bond B/E Type `W‟: Warehouse Bond is mandatory. EOU Bond: In case of items, where EOU Notification is claimed, EOU Bond or a procurement Certificate from Central Excise authorities is mandatory. (iii) Provisional Assessment: If any of the item is assessed provisionally, the Bond (Provisional or Test) is mandatory. The Appraising Officer has to specify Type of Bond, Bond Amount, BG %, BG amount, basis for Bond amount at the BE level. AC/DC has to confirm the action of Appraising Officer. Auditor has no option w.r.t. Bonds. However, he can view the Bonds requirements. (iv) Bond Requirement Details On completion of assessment, the Bon....
X X X X Extracts X X X X
X X X X Extracts X X X X
....concerned Central Excise Division and accordingly ensure timely and transparent cancellation of bonds. (vi) Debiting of the Bond for manual Bill of Entry: (a) Continuity or a specific Bond shall be accepted & registered in the system. A continuity Bond registered in the system can be utilized in respect of electronic as well as manual Bills of Entry. For debiting manual Bill of Entry, the Bond officer shall select the option of MBE-debit and enter the details of the manual Bill of Entry and amount of Bond / BG etc. After debiting, a debit slip will be generated which can be printed one copy of slip should be attached with the B/E and other copy given to the importer. In respect of Bills of Entry where processing has not yet been automated, it would still be possible under the aforesaid Bond Management System to register the Bond in the system and utilize it against a manually processed Bill of entry as per procedure indicated above in respect of a continuity / revolving Bond. (b) Consequent upon the introduction of the Bond Management System, the Bills of Entry would be linked to the respective Bonds and the system will maintain an account in thi....
X X X X Extracts X X X X
X X X X Extracts X X X X
....s of Bond debit or the Bond requirements shall be printed on the provisionally assessed B/E. Details of a debited Bond will also be printed on the Importer's copy and Exchange control copy of B/E. (b) In case any Cash deposit is required to be taken, the Appraiser can specify the amount of Cash deposit, the Challan for Cash deposit will also be printed with the assessed copy of B/E which will also be deposited with the designated bank like the duty and fine/penalty. (c) Facility has also been provided in ICES 1.5 to finalize the assessments of provisionally assessed Bills of Entry by the group Appraiser and AC/DC. 22. High Sea Sales Consignments (i) This category would cover all imports where the goods have been transferred by the original importer by sale or otherwise before their clearance from Customs. The EDI system has been designed to provide for both the options, namely, the ultimate buyer paying a percentage loading over the invoice price or a fixed sum in addition to the invoice price based on the high sea sale agreement and the local invoice to arrive at the final assessable value. (ii) If the goods have been purchased on High Seas S....
X X X X Extracts X X X X
X X X X Extracts X X X X
....he importers/Customs Brokers shall be amended as follows:- (ii) If any of the items is leviable to additional duty under Section 3 of CTA, 1975 with reference to the retail sale price declared on the article the relevant column should be filled(Y/N). If yes following particulars should be furnished. Invoice S No Item Sr No. Description No. of Units Retail Sale Price ---------------No.------- (with specifications) ----------- Rs. Per unit......" (iii) The importers/Customs Brokers would be required to declare the retail sale price of the items to which the provisions of the Standards of Weights and Measures Act. 1976 or any other law in this behalf applies and which are notified under a notification issued under Section 4A of the Central Excise Act,1944. It would be advisable to specify these details at Serial No. ..... (Claim of assessment)for each pack size of the imported item. For example, if tooth paste is imported in sizes of 50 gms, 100 gms. and 150 gms. it is suggested that these be noted as three separate entries in the aforesaid Serial No.(Claim to assessment) since they would be having three separate retail prices. Each article, w....
X X X X Extracts X X X X
X X X X Extracts X X X X
....at the B/E has been assessed provisionally due to SVB issue and also ensure that details are available for that Bill of Entry. 24.2 Post clearance: After final order is given by the Special Valuation Branch, the final assessment shall be carried out in the system.. 24.3 Renewal of SVB Orders and Ongoing SVB inquiries: Please refer to the CBEC Circular No. 04/2016 dated 09/02/2016 For Renewal of SVB orders, a system of one time declaration is provided to the importers whose SVB orders are pending for renewal before the SVB. The concerned importers shall submit a declaration in the prescribed formats (ANNEXURES- 1 & 2 attached to the CBEC Circular 04/2016) by 31/05/2016 to the jurisdictional SVB. The SVB shall dispense with the process of renewal if the importers file the declaration in Annexure 1 and ensure that the concerned customs station is informed immediately regarding the same so that Provisional Bills of entry pending there for finalization can be finalized at the earliest. In case importers declare in Annexure 2 SVB inquiries shall be initiated in pursuance of Circular No. 5/2016 dated 09/02/2016 by serving upon the importers questionnaire at Annexure A and B at....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... Sl No. CTHNotfn. Sl No. 1 2 3 4 5 6 7 8 9 10 Abbreviations in Col. (3) above refer as under. AD Notfn. = Anti-dumping notification number/year I S No. = Item S.No. in the notification PS No.= Producer/exporter S.No. against the respective country QTY = Quantity of goods in the units of measurement on which anti-dumping rate has been fixed, if different from quantity declared in the invoice details. (iii) After entry of CTH, the data entry operator shall enter the details of Anti-dumping notification as indicated above. The rate of anti-dumping duty would be taken by the system from the directory. If the unit of measurement of quantity of goods declared in the invoice details is different than the unit of measurement on which the anti-dumping duty is applicable, the quantity in such unit of measurement on the basis of which, the anti-dumping duty is leviable has also to be declared for computation of duty amount. The rate and amount of anti-dumping duty will be printed on the check list and copies of Bills of Entry. 26. Tariff Value (i) Notification Directory Directory fo....
X X X X Extracts X X X X
X X X X Extracts X X X X
....e option to select the tariff value and also change the S.No. of the Tariff value if incorrectly declared by the importers. The rate of Tariff value will be printed on the check list as well as on the copies of Bill of Entry. 28. Levy of Addl. Duty For Non-Excisable Goods In respect of goods not leviable to Central Excise Duty under the Central Excise Tariff Act, 1985 but liable to Excise Duties under other Central Acts (such as Medicinal and Toilet Preparation Act, 1955) or liable to Additional Duty under Section 3(1) of the Customs Tariff Act, 1975, codes have been given to enable the documents for such goods to be processed on the System. A list of such codes is given in Annexure „E‟ for filing Column 39(B) (5) - CETH CODE. 29. General Information With a view to minimizing the number of queries at the time of assessment and to improve the quality of assessment, it has been decided to capture the following information about goods imported, in the ICES system at the time of filing of declaration Annexure „C‟. a. Brand b. Model c. Grade d. Specifications e. Any other information relevant for assessment....
X X X X Extracts X X X X
X X X X Extracts X X X X
....uld immediately get themselves registered at any of the Customs locations as per list enclosed at Appendix 1. The format for registration is at Appendix 2. 3.3 Registration of Shipping lines/Agents, Consol Agents: EGM shall be filed electronically by the Shipping Lines/Agents at the Gateway Ports. Before filing EGM, the Shipping Lines/Agents should register themselves in the ICES at any of the Custom Stations where ICES 1.0 is operational. They would be required to furnish information as per Appendix 3. No re-registration is required in case the agency is already registered at any existing Customs location where ICES 1.5 is operational. 3.4 Registration of Bank Account with Authorized Dealer of Foreign Exchange: Except for NFEI Shipping Bills, the account number of the exporter opened with the Authorised Dealer of foreign exchange is required to be available in the ICES 1.5. The Directory of Authorised Dealers Codes is maintained in the ICES 1.5 on the basis of details made available by the RBI. The exporters may note that it would not be possible for the local customs officials to add the details of the AD code unless the information is available from RBI. In case the detail....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... the relevant codes for the respective currencies in the list of currency codes appended with this Public Notice have to be used. Use of any incorrect code will result in incorrect conversion of the currency into Indian Rupees. Appendix 5 3.10 Country Codes: Wherever in the Shipping Bill / EGM, reference is required to be made to the name of the country, the appropriate Code of the country as indicated in the list of country codes appended to this Public Notice have to be used. Appendix 6 3.11 Port Codes: An appropriate port code must be indicated wherever reference to port name is required to be made in a Shipping Bill /EGM. The Correct code may be obtained from the respective Carriers or checked from www.unece.org/etrades. A list of all relevant codes would also be available at the service center. 3.12 Registration of DGFT Licenses: If the exports are in discharge of export obligation against any of the DGFT Exim Licenses or Advance application, such license/advance application should be first registered in the ICES and License No. or the Registration No. or advance application should be indicated against each item of goods in the Shipping Bill. However, EDI messages bet....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ata Entry Operator and handed over to the Exporters/Customs Broker for confirming the correctness of the electronic declaration. The Customs Broker/Exporter will make corrections, if any, in the checklist and return the same to the operator duly signed. The operator shall make the corresponding corrections in the data and shall submit the Shipping Bill. The operator shall not make any amendment after generation of the checklist and before submission in the system unless the corrections made by the Customs Broker/Exporters are clearly indicated on the checklist against the respective fields and are signed by Customs Broker/Exporter. 4.5 The system automatically generates the Shipping Bill number. The operator shall endorse this Shipping Bill number on the checklist in clear and bold figures. It should be noted that no copy of the Shipping Bill would be available at this stage. This check list endorsed with Shipping Bill No. shall be used for bringing the export goods to the Port. 4.6 It may be noted that since the document numbers are to be assigned by the Central Server at a national level, all document numbers, e.g., for Shipping Bills, EGMs, challans, would not be in a cont....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ng software from NIC website link which has been provided at ICEGATE website. Software of NIC is free of charge. 4.9 The validity of the Shipping Bill in EDI System is fifteen days only. Therefore, if the export goods are not registered within 15 days from the date of Shipping Bill, the Shipping Bill shall lapse and has to be filed again in the system. 5. PROCEDURE FOR GR-1 5.1 As per the procedure in EDI, there would be no GR-1 nor SDF. Only in the case of Shipping Bills processed manually, the existing arrangement of filing GR 1 forms would continue. 6 ARRIVAL OF GOODS AT EXPORT EXAMINATION SHEDS IN PORT. 6.1 In respect of goods intended to be exported against an electronic Shipping Bill, the MULDWARKA Port will permit entry of the goods on the strength of the checklist. 6.2 If at any stage subsequent to the entry of goods at MULDWARKA Port, it is noticed that the declaration has not been registered in the system, the Exporters and Customs Brokers will be responsible for the delay in shipment of goods and any damage, deterioration or pilferage, without prejudice to any other action that may be taken. 7 PROCESSING OF SHIPPING BILLS 7.1 The S/B would be proc....
X X X X Extracts X X X X
X X X X Extracts X X X X
....n only after verifying the compliance with the applicable Compulsory Compliance Requirements (CCRs). The system is designed in such a manner that, owing to some technical reasons if the RMS (Export) fails to provide output to ICES (Export) or RMS output is not received at ICES (Export) end in time, the existing norms of assessment and examination prescribed in the Board's Circular Nos. 06/2002 - Customs dated 23.01.2002, 01/2009-Cus dated 13.01.2009, and 28/2012-Customs dated 16.11.2012 would be applicable. (ii) Assessment of RMS interdicted Shipping Bills in ICES: The RMS will not alter the existing process and movement of Shipping Bills on the ICES. When RMS interdicted bills are directed for assessment by the system, officers concerned are required to perform appraising/ verification of self-assessment in ICES as per the RMS instructions. The RMS instructions will be displayed in ICES screen of the officer as Appraising Instructions. The RMS instructions can also be accessed by using "View" option in the SB header. Instructions will be given in the RMS tools interdicting the bill as per the perceived risk in each Shipping bill based on the declarations made in ....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... that any amendment would lead to a change in risk perception and consequent treatment of risk by RMS. The RMS will process the SB after every amendment and provide its output to ICES. However, the treatment of risk after the amendment(s) will be communicated in ICES only after goods registration. There may be some cases wherein the on submission treatment of risk is to send the SB for "examination only" and after amendment(s) the risk treatment would get modified to send the SB for "Assessment or Assessment& Examination". In such cases RMS instructions to "Send the SB back to AC for assessment" will be displayed in the Inspector's screen in ICES after goods registration. Such SBs should be sent back to AC for assessment by the examining staff. Officers should scrupulously follow the RMS instructions. (iv) Goods Registration: The goods registration is mandatory for all the SBs. There is no change in the goods registration procedure. The system will display the Single-Sign-On Id (SSO Id) of the officer for inspection/examination. If the SB is interdicted for examination, the package numbers to be examined will also be displayed. (v) Examination: T....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ons in documents like AR4/ARE1 vis-à-vis the declarations in the SB and if he/she has strong reasons to believe that the exporter has mis-declared the description, RITC or value of the goods, he/she should send the SB back to the appraising group (if required), for assessment but only after prior approval of the Commissioner or an officer authorised by him for this purpose, who shall not be below the rank of Additional/Joint Commissioner of Customs and after recording the reasons for the same. A brief remark on the reasons and particulars of Commissioner's authorization shall be made by the officer examining the goods in the departmental comments in the EDI system. The Officer giving the LEO shall ensure that the consignment complies with CCRs appearing in the RMS instructions. Before giving LEO the officer shall also ensure that the dockets containing all the relevant documents are collected and retained in the office. Whenever the decision of the LEO officer is at variance with the CCRs and RMS instructions in respect of a particular SB, he/she should record the reasons for his/her view in the EDI. (v) Export General Manifest (EGM): After issue o....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ing a SB and the details of the same shall be recorded as departmental comments. (ix) Documents Collection: While discharging the LEO responsibility, the following documents should be collected from the exporter/ CHA by the officer giving LEO after affixing his/ her signature on the important documents. a) Copy of the Shipping Bill b) AR-4/ ARE- 1 (wherever applicable). c) Invoice/packing list d) ADC clearance, wherever required. e) Other documents specified in the CCR instructions. f) RBI GR waiver, wherever applicable. g) CENVAT declaration, wherever required. h) Any other documents submitted by the exporter/CHA. All these documents should be neatly kept in a docket, which will have a check list on the top, containing the documents listed supra. The Check list shall be signed by the LEO officer and the representative of the exporter/CHA. While signing the documents, the LEO officer shall put his name stamp under his signature. 8. CUSTOMS EXAMINATION OF EXPORT CARGO 8.1 On receipt of the goods in the Export Shed in the MULDWARKA Port, the exporter will contact the Examining Off....
X X X X Extracts X X X X
X X X X Extracts X X X X
..... PROCEDURE IN CASE OF CONTAINERS STUFFED OUTSIDE PORT AREA 9.1 Containers stuffed in factories would enter the ICD/CFS on the basis of the checklist. Customs will verify the seal on each container and make an endorsement on the checklist and Annexure C. Thereafter, the exporter would present the Invoice, Annexure C and the checklist along with all the original documents such as, Packing list, ARE-1, etc., to the designated Customs officer who will enter all the particulars along with the seal No. in the system and submit the S/B to the Appraiser/ Superintendent for consideration of "Let Export" order. 9.2 The samples drawn, if any, in the factory should be brought to the Export Shed in ICD/ CFS along with the container and handed over to the designated officer, who would enter the details in the system and forward the samples to the Appraiser/Supdt. in charge for inspection or for further testing, etc. 9.3 The system may require re-examination of the factory stuffed container on a random basis. If the container is selected for re-examination by the system, the same shall be examined and report entered in the system. The Shed Appraiser/ Superintendent may also decide to re....
X X X X Extracts X X X X
X X X X Extracts X X X X
....aw two samples from the consignment and enter the particulars thereof along with name of the testing agency in the system. Record of samples shall be maintained in the System. Therefore, no separate registers will need to be maintained for recording dates of samples drawn. Three copies of the test memo will be prepared manually and signed by the Examining Officer, the Appraiser and the exporter. The disposal of the three copies would be as follows: - i. Original to be sent along with the sample to the testing agency. ii. Duplicate copy to be retained by Customs with the second sample. iii. Triplicate to be handed over to the exporter. 12.2 AC/DC may, if he deems necessary, order for sample to be drawn for purposes other than testing such as visual inspection and verification of description, market value enquiry, etc. 12.3 "Lab Module" in ICES for use by CRCL, Textile Committee and other agencies: Under Lab Module the Examining Officer can generate test memos and record the details of the samples drawn online, as well as print test memos. Customs will duly dispatch the samples to the concerned laboratory/agency. Upon the receipt of the samples, th....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... 16. AMENDMENT OF FREIGHT AMOUNT 16.1 If the freight/insurance amount undergoes a change before "Let Export" is given, corresponding changes would also need to be made in the S/B with the approval of AC /DC Exports. But if the change has taken place after the "Let Export" order, approval of Additional/Jt. Commissioner would be required. Non-intimation of such changes would amount to mis-declaration and may attract penal action under the Customs Act, 1962 17. RECONSTRUCTION OF LOST DOCUMENTS 17.1 Duplicate print out of EDI S/B cannot be allowed to be generated if it is lost, since extra copy of Shipping Bills are liable to be misused. However, a certificate can be issued by the Customs stating that "Let Export" order has been passed in the system to enable the goods to be accepted by the Shipping Line, for export. Drawback will be sanctioned on the basis of the "Let Export" order already recorded on the system. 18. RE-PRINT OF SHIPPING BILLS 18.1 Similarly, re-prints can be allowed where there is a system failure, as a result of which the print out (after the "Let Export" order) has not been generated or there is a misprint. Permission of AC/DC (Exports) would be n....
X X X X Extracts X X X X
X X X X Extracts X X X X
....r remote system though ICEGATE. If any query has been raised or deficiency noticed, the same will be shown on the terminal and a printout of the query/deficiency may be obtained by the authorized person or the exporter from the Service Centre or in own his office, if the exporter has connection with ICEGATE. The exporters are advised to reply to such queries expeditiously through the service centre. The claim comes in queue of the EDI system after only after the reply to queries/deficiencies is entered in the ICES 1.5. 20.7 Shipping Bills in respect of goods under claim for drawback against brand rates would also be processed in the same manner, except that drawback would be sanctioned only after the original brand rate letter is produced before the designated customs officer in the office of Assistant/ Deputy Commissioner (Export) and is entered in the system. The exporter should specify the Sl. No. of drawback as 98.01 for provisional drawback in the Annexure -A (Export) 20.8 All the claims sanctioned in a particular day will be enumerated in a scroll and transferred to the designated bank. The designated bank would credit the drawback amount in the respective account of th....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... Customs, Central Excise Duties and Service Tax Drawback Rules, 1995 shall continue to declare the figure "9801" as an identifier under the Drawback details in the shipping bills filed. (ii). For shipping bills filed on or after 23.11.2015, the exporters opting for claim of brand rate under rule 7 of Drawback Rules, 1995 shall declare the figure "9807" (instead of "9801") as an identifier in the shipping bill under the Drawback details. Immediately after the said identifier, the tariff item number of goods as shown in column (1) of the Schedule shall be declared followed by the character "B". For example, if "Tractors (other than tractors of heading 8709)" are exported under claim for brand rate under rule 7 and the related Drawback Tariff Item number for such tractors in the AIR Schedule is 8701, the declaration on the shipping bill would be "98078701B". Similarly, for "Bicycle pump" the related Drawback Tariff Item number in the AIR Schedule is 841403 and the declaration on the shipping bill would be "9807841403B". Such a shipping bill is to be processed by the Customs for payment of provisional drawback amount equivalent to the Customs component („B‟ column ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ovide the information to the Asst/Dy. Commissioner of Customs at the port of export that the option for claim of brand rate reflected in the shipping bill was intended to be under rule 7 of the Drawback Rules, 1995 and also indicate the Tariff Item number (as shown in column (1) of the AIR Schedule) corresponding to the export goods (exported in the shipping bill) and seek provisional drawback amount equivalent to the Customs component. The Customs shall enter this information in its records along with details of the calculation of the amount. The payment of the provisional drawback amount shall be processed with conditions as applicable to AIR drawback wherein there is claim for only the Customs component. 20.11 Special Advance Authorisation Scheme: i) To give effect to the Special Advance Authorisation Scheme, the Notification No. 45/2016-Customs dated 13th August, 2016 has been issued providing exemption to fabrics (including interlining) from import duty subject to conditions specified therein. Further, Notification No. 110/2016-Customs (NT) dated 13th August, 2016 has been issued providing, subject to the specified conditions, the alternative All Industry Rates (AI....
X X X X Extracts X X X X
X X X X Extracts X X X X
....the Examining Officer and Supervising Officer at the factory. The export invoice shall also be signed and stamped by both the officers at the factory. Thereafter the goods shall be brought to the concerned Customs Warehouse for the purpose of clearance and subsequent "Let Export". The Exporters / Customs Broker shall present the goods for registration along with Examination Report in Annexure 'C1', ARE-1, Export Invoice duly signed by the Examining Officer and Supervising Officer at the factory, check list, declaration in form Annexure 'A', Annexure 'C1' and other documents such as document of transportation, ARE-1, etc. to the Examiner in the concerned shed. After registration of goods, the shipping bill will be marked to an Examiner for verification of documents and seal. If seal is found intact the Shipping Bill will be recommended for LEO, which will be given by the Shed Appraiser. However, if seal is not found intact, the goods will be marked for examination and LEO will be given if the goods are found in order. 22. EXPORT OF GOODS UNDER THE EPCG/DES SCHEME 22.1 The procedure for online transmission of Licenses/Authorizations issued under Duty ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....d to quote the license number on the respective Import documents in case they intend to use the licenses. No manual debits would be made in hard copies of licenses at the time of assessment of Bills of Entry for imported cargo. 22.3. For monitoring of export obligation under licenses issued by DGFT under above mentioned schemes, Customs would transmit online all such Shipping Bills to DGFT wherever imports / exports have been affected under licenses received online from DGFT under DES / EPCG schemes. 22.4. For any amendment in licenses issued under above schemes by DGFT, importer would obtain a log print of usage of license in prescribed format. DGFT would process amendment(s) of license based on log print of usage of license issued by Customs and transmit online the necessary amendment(s) of license to Customs. No imports under such license would be allowed after issuance of log print till the amendment message is received from DGFT. 22.5. The above procedure would be applicable in respect of file nos./ Licenses/Authorizations issued under Duty Exemption Scheme (DES) and Export Promotion Capital Goods Scheme (EPCG) on or after 30th September 2008 by DGFT. The existing pro....
X X X X Extracts X X X X
X X X X Extracts X X X X
....x. D (Export). b. I f inputs mentioned in EPCG/DES only have been used in the manufacture of the goods under export, in Column titled "ITEM SR.NO. in Advance Authorization of Annex. D (Export), the exporters/CHAs are required to give S.No. of inputs in Part-C of the DES Book and Exporters need not fill up column titled "DESCRIPTION OF RAW MATERIALS". c. If some inputs which are not in Part-C of the EPCG/ DES have been used in the manufacture of the goods under export and the exporter wants to declare such inputs, he shall give the description of such inputs in column titled "DESCRIPTION OF RAW MATERIALS", d. In the column "IND/IMP", the exporters are required to write "N", if the inputs used are indigenous and "M", if the inputs used are imported, e. In column titled "Cess Schedule Sl. No." the relevant Serial No. of the Schedule relating to Cess should be mentioned 23 EXPORT OF GOODS UNDER DFIA SCHEME The details pertaining to export products i.e. input materials utilised as per SION should be clearly mentioned at Annexure A (Export) at the time of filing. 24. Stuffing Report After the LEO the Container shall be stuffed with the good....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ake the claim. Any other means of claim shall not be accepted. Shipping Bills which are filed prior to 20-09-2016 but for which LEO is given on or after 20-09-2016 are also eligible for RoSL. Such Shipping Bills which have not claimed the scheme code as listed above, may need to be amended before LEO to avail this benefit. In the absence of proper scheme codes, the ROSL benefit would not be available. ROSL Rebate: The amount of rebate is calculated using the FOB value and the rates and caps of rebate specified in the ROSL scheme. (For further details refer to Para 7 of CBEC Circular 043/2016-Cus). To facilitate exporters, necessary changes have been made to reflect the rebate amount in the shipping bill check list, during export processing and in the print out of post-LEO shipping bill. [While changes have been made in the Service center checklist, RES providers may provide similar option in their packages for facilitation of trade]. Ensuring availment of ROSL: The following changes have been made in the Shipping Bill Checklist & ICEGATE for Exporters to confirm that their choice has been reflected correctly in the system. 1. The ROSL Amount is printed at th....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... new addition of AD, the same is to be intimated to the concerned Custom House at the port of Export. b. The system would generate on all Shipping Bills, the due date for submission of BRCs. c. The exporter shall submit a certificate from the Authorized Dealer(s) in respect of whom declaration has been filed containing details of the shipments which remain outstanding beyond the prescribed time limit, including the extended time, if any, allowed by AD/RBI. Such a certificate can also be provided by a Chartered accountant in his capacity as a statutory auditor of the exporter's account. A Performa for furnishing such negative statement was enclosed as Annexure to the Board Circular 5/2009 dated 2.2.2009 (available at www.cbec.gov.in). Further, the exporters also have the option of giving a BRC from the concerned authorized dealer(s). d. Such certificates shall be furnished by the exporters on a 6 monthly basis in respect of exports which have become due for realization in the previous 6 months. For example, for the six-monthly period of January- June 2013 (during which exports were effected), the statement/BRC needs to be submitted after1stJuly,2014. ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....as been realized. Thereafter, all such S/Bs will be deleted from the pendency list. 28. The system will indicate to the Assistant Commissioner/Deputy Commissioner (Drawback) all cases of Drawback Shipping Bills if the BRC/negative statement in the prescribed Annexure enclosed to the Board's Circular is not submitted by the exporter within the prescribed period. 29. Service tax refund One of pre-requisites for claiming S.T refund electronically through ICES 1.5 is that the exporters should have a bank account and also central excise registration number or service tax code number (including service tax registration number) and the same should be registered with ICES 1.5. Details of the process of registration in ICES 1.5 are being shared for providing clarity to officers and stake holders. 29.1 Registration of Bank Account The S.T Refund Scheme will be similar to drawback scheme. STR amount processed under the ICES will be disbursed through the branch of the authorized bank at each customs location. The STR amount in respect of individual exporters will be credited directly to the bank account of the exporter, in the authorized bank branch at a Custom location or to an....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ith the CLK Role to modify/amend the bank account details and central excise registration number/service tax code number. It may be noted that registration of bank account and central excise registration number/service tax code number has to be done at each customs location separately. While capturing central excise registration certificate or service tax code number in ICES 1.5, the system will validate the details with details available from Automation of central Excise and service tax (ACES) and only on successful validation, data will be saved in ICES 1.5. It may be added that either central excise registration certificate or PAN based service tax code no. (Including service tax registration number) has to be provided to claim ST Refund through ICES 1.5, in case an Exporter does not have either of two numbers mentioned above, he should be advised to either get the same as per procedure prescribed in notification no. 17/2009 ST dated 7.7.2009 or claim services tax refund from jurisdictional central excise / service tax officer 29.3 Details of Post - registration processing of ST Refund in ICES 1.5. Salient features of processing of service tax refund through ICES 1.5 ar....
X X X X Extracts X X X X
X X X X Extracts X X X X
....the EDI work of MULDWARKA port will be carried out at the office of the Assistant Commissioner, Customs Division - Porbandar, Near Airport, Behind N. K. Mehta Hospital, Porbandar - 360575. -sd- (M.K. SRIVASTAVA) COMMISSIONER OF CUSTOMS (P) JAMNAGAR ============= Document 1 पैससेवारà¥à¤¥ कर संप आयà¥à¤•à¥à¤¤ का कारà¥à¤¯à¤¾à¤²à¤¯, सीमा शà¥à¤²à¥à¤• (निवारक), जामनगर Office of the Commissioner of Customs, Customs (Preventive), Jamnagar "सारडा हाउस", बेडी बंदर रोड़ पंचवटी के सामने, जामनगर - 361008 "Sarda House", Bedi Bandar Road Opp.-Panchvati, Jamnagar-361008 Phone: 0288-2757500 Fax: 0288-2757539 Email:[email protected] Date: 27.04.2017 F. No. VIII/48-07/EDI/Sys/HQ/2011-12 Pt.II Public ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ode is registered for exports, the same shall hold good for imports also. The DGFT has notified certain generic Codes for certain classes of importers in the EXIM Policy and exempted them from taking a specific IE Code. Such importers should use respective codes for filing the Bill of Entry. However, if an importer does not fall in the exempted category and also does not hold 'specific IE Code, he should use the Code 0100000053 for personal effects and "0100000001" for all other imports. In such cases, the Bill of Entry shall automatically appear on the computer screen of the concerned Assistant Deputy Commissioner for online approval. Scanned by CamScanner 1.2 Registration of Customs Broker in ICES Customs Brokers are required to register their details in the ICES at the respective Custom Houses from where they have been licensed. If they intend to operate at other stations, the intimation of the same should be registered in the ICES at the respective stations. In case the Custom House from where the Customs Broker has been licensed is not yet brought under ICES, such Customs Brokers should approach the Customs authorities indicat....
X X X X Extracts X X X X
X X X X Extracts X X X X
....dated 19/07/2013, where adherence to Standard Unit Quantity Codes as prescribed in the Customs Tariff Act has been prescribed. (List of Measurement Codes attached as Appendix 5.) 1.7 Country Codes: Wherever in the Bill of Entry or IGM, etc., a reference to country name is required to be made appropriate Code of the country as indicated in the list of country codes appended to this Public Notice should only be used. (List of Country Codes attached as Appendix 6.) 1.8 Port Codes: All the ports of the world have been codified by United Nation and allotted UN LOCODES. Appropriate port code should only be indicated wherever reference Scanned by CamScanner to the port name is required to be made in a Bill of Entry and IGM or any other document. It is not possible to attach list of all port codes being too large. Correct code may be obtained from the respective Carriers or checked from UN website. (http://www.unece.org/cefact/locode/) 1.9 Registration of DGFT Licenses If the imports are against any of the DGFT Exim Licenses, such license should be first registered in the ICES and the Registration No. should be indicated agains....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ck of five items): Rs.10 (v) Amendment fee - Each Additional block of five items: Rs. 10 (vi) Amendment fee - Other documents: Rs.10. (vii) Printing Check list: Rs.10 Scanned by CamScanner Note 1: The above charges are excluding Service Tax. The vendor shall collect the service tax from trade at the prevailing rates and shall make the payment of the Service Tax to the Govt. exchequer. Note 2: The above charges include data entry of the documents, check list printing and print out of the assessed document and out charge. The check list will be provided free of charge till they are certified to be free of mistake by the customer. However, in cases where the customer wants to incorporate corrections in the original declarations provided by him, check list will be provided at an additional cost of Rs 10. Any check list in respect of remote filing of the Bill of Entry will cost Rs. 10. - 2 Filing of IGM / Consol Manifest The Shipping lines or other persons as envisaged under Section 30 of the Customs Act, 1962 shall submit the Import General Manifest (IGM)/Consol Manifest through ICEGATE on 24 hour basis. 2.1 Filing of....
X X X X Extracts X X X X
X X X X Extracts X X X X
....om his premises. 3.1 Filing through Service Centre (i) The Customs Broker/Importer should furnish information in „Annexure C' and present the same to the service centre operator along with copy(ies) of import invoice and packing list. Details of information in Annexure „C" should be correct, complete and legible. Incorrect and invalid entries may get rejected on entry of data. The Service center shall accept the declarations in Annexure C during the working hours of Port. The system would accept data entry of Annexure "C" only if it finds that the SMTP No. and Bill of Lading matches the corresponding line number of the IGM. The system will accept only one declaration against a line number. If the declaration is not accepted, the Customs Broker/ importer should verify the particulars. (ii) Once the IGM is filed in the Customs Computer System, whenever a Bill of Entry pertaining to any line in the said IGM is filed, the system will cross verify the details of IGM No., the Bill of Lading, etc., and the Bill of Entry would be accepted only if the relevant particulars match with those in the IGM. If any Bill of Entry is n....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... over to the service centre operator for entry of corrected data. The Operator shall make corrections in the corresponding data and hand over the revised checklist to the Customs Broker/Importer for re-confirmation. This process would be repeated till the Customs Broker/Importer signs a clean checklist in token of correctness of the entered data. (ix) The Operator shall submit the authenticated electronic checklist to the system. The system will then generate a B/E. No., which would be endorsed on the printed checklist and returned to the Customs Broker/Importer. The Bill of Entry No. shall be in a running serial number of all the Custom Houses operating on consolidated ICES 1.5. The Bill of Entry Numeric No. shall be suffixed with the date of filing. Thus Numeric number combined with date shall be a Bill of Entry Number. Since running number sequence is common for all-India basis, the Bill of Entry number may not be continuous. (x) The Operator shall retain the original Annexure "C" declarations with copies of invoice and packing list and shall hand over all the check lists to the Customs Authorities period....
X X X X Extracts X X X X
X X X X Extracts X X X X
..... No. shall be generated. In case of remote filing of Bill of Entry the Customs broker /Importer has to ensure correctness and validity of data entered failing which the data will either be rejected by the ICES or incorrect information shall be incorporated in the submitted Bill of Entry which shall lead to problems of amendments. Remote EDI filing software from NIC website link which has been provided at ICEGATE website. Software of NIC is free of charge. (vii) The instructions specified in 3.1 (iii) to (vii) may be kept in mind while Filing in RES software too. 3.3 Self Assessment The bill of entry shall be deemed to have been filed and self-assessment of duty completed when, after entry of the electronic declaration in the Indian Customs Electronic Data Interchange System either through ICEGATE or by way of data entry through the service centre, a bill of entry number is generated by the Indian Customs Electronic Data Interchange System for the said declaration. 4 (i) Processing of Bill of Entry for Assessment Once the Bill of Entry is submitted in the system, the ICES validates the details fr....
X X X X Extracts X X X X
X X X X Extracts X X X X
....asis depending on roles and jurisdiction assigned to them. During the processing of Bill of Entry, the officer concerned may raise Query to the importer for further clarification/ information. The Query on approval by the concerned AC/DC shall be transmitted to the importer for online reply. Such a Bill of Entry on which query has been raised, is automatically pulled out of assessment queue till reply online/through service center is received from the importer. 4.1 RMS facilitation. Facilitation of Bills of Entry in respect of certain goods using RMS for faster clearance of such goods Bills of Entry in respect of the items under RMS facilitation would be assessed for risk by the System immediately on their submission and a print out of the assessed Bill of Entry along with 3 copies of TR-6 challans will be made available to the Customs Brokers/ Importers for payment of duty and getting the goods examined if required, and for out of charge. In so far as the NMI/DEC cases (e.g. Custom Notification Nos. 051/96 dated 23.07.96, 39/96 dated 23.07.96) are concerned, the debiting in the License, etc., would be required 'to be done by the A....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ice, as the case may be. (ii) After the examination is completed, the Import Shed Examiner/Inspector and Appraiser/Superintendent shall write the examination report on the first check copy of the Bill of Entry (Hard Copy of B/E) and enter the examination report in the system. The Shed Appraiser/Superintendent shall transfer the B/E to the Appraising Group. The Customs Broker/Importer shall present the first check copy of the Bill of Entry on which examination report has been written along with the original invoice and other import documents necessary for assessment to the concerned Group Appraiser/Superintendent. The Assessing Officer, if satisfied, shall complete the assessment of B/E in the system. After assessment, the Bill of Entry shall move in the system as in the case of second check assessment. The Customs Broker/Importer shall take print of assessed copy of the Bill of Entry and TR-6 challan and shall deposit duty amount with the designated bank. 4.4 Audit . After completion of assessment from the Assessing Officer, the B/E will be moved to the Auditors screen electronically for doing concurrent audit. The audit officer....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ping Lines/Consol Agents in co-operation with Custodians shall provide the Delivery Order electronically in mutually agreed formats and they are not required to visit either of the offices. Secure electronic transmission of Delivery order between shipping lines/consol agents and the custodian will enhance the security and transparency of the cargo as well as expedite the clearance of the cargo. Please refer CBEC Circular No. 24/2015 dated Issuance of 14/10/2015 regarding Improving Ease of Doing Business Electronic Delivery Orders. 6. Examination of Goods 6.1 After examination order in the case of First Check Bill of Entry, after assessment in the case of duty free import where duty assessed is zero and after payment of duty assessed with interest(if any) in case of second check Bill of Entry, the Bill of Entry shall move to the Examination section for goods registration. (i) The Customs Broker/Importer shall present the documents, as per the list below, (the documents should be arranged in a file cover in the following order):- a) Assessed copy of Bill of Entry b) Copy of Delivery Order& Bill of Lading ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....e to the Import Shed Appraiser/Supdt for out of charge order. 6.3 All the above documents, except original License, will be retained by the Customs at the time of giving „out of charge". Hence, only the certified photo copies of Delivery Order, Master Bill of Lading, House Bill of Lading should be attached instead of originals. 6.4 On the basis of the examination report, the Appraising Group may revise the assessment or raise a further query to the importers, if necessary. 6.5 After completion of the examination of the goods, if the Shed Appraiser/ Superintendent are satisfied that the requirement of Section 47 of the Custom Act, 1962 have been complied with, he shall give „Out of Charge" for the Bill of Entry on system. 6.6 After the out of charge order, the system will generate print of Importer's copy and Exchange Control copy of the Bill of Entry along with 3 copies of Order of Clearance. Print of the same shall be obtained from the designated computer terminal. The print copies of the Bill of Entry shall bear the Order of Clearance number and name of the examining Appraiser/Supdt. The importer's copy of the Bill of En....
X X X X Extracts X X X X
X X X X Extracts X X X X
....d into the system by the operator of the service center. Only after acceptance by the group Appraiser/Supdt and AC/DC, the amendment will get incorporated in the Bill of Entry. After amendment, the Bill of Entry shall be assessed as usual. If the duty was paid prior to amendment, a differential duty challan will be printed along with the revised assessed Bill of Entry. 8.2 After Out of Charge Order, no amendment shall be allowed in the Bill of Entry. However, in case amendment is warranted after Out of Charge Order but before delivery of goods, the System Manager can cancel the out of charge Order in the system. The original prints of the Importer"s copies and Exchange Control copies of the Bill of Entry shall be retained by the System Manager in a file. After, fresh Out of Charge Order, new prints of the copies of Bill of Entry shall be given. 9. Re-assessment Any time after assessment and before Out of Charge Order, a Bill of Entry can be recalled and reassessed and put to reassessment by the AC/DC concerned, if it so warranted for any reason. 10 Advance Noting Advance B/E can also be filed in the ICES before the arrival....
X X X X Extracts X X X X
X X X X Extracts X X X X
....EPB No., DEPB date, DGFT File No., and Issuing Authority. After satisfactory verification of all the Shipping Bills, the officer designated by Asst./ Dy. Commissioner shall make an endorsement on the reverse of the DEPB and the list of Shipping Bills attached with the DEPB to the effect that the verification of all the Shipping Bills is satisfactorily done and put his signature with date and official stamp. 11.3 Registration of DEPB (i) Before claiming exemption under DEPB Exemption Notification 034/97- Cus., dated 7.04.1997 against a DEPB, the license in question is required to be registered in the import system. The officer designated by the Asstt./Dy. Commissioner to register the DEPB in the system shall ensure that verification of DEPB with reference to the exports on the basis of which DEPB is issued by DGFT has been done prior to its registration in imports. (ii) All importers/CHAS are advised to ensure that their IEC details with PAN have been transmitted by DGFT to the Customs at the time of obtaining the DEPB. The Customs Broker/Importer shall furnish details of DEPB license in the pro-forma given as ANNEXURE A. (iii) T....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... the menu relating to transfer release advice. (iii) Release Advice No Release Advice Date Release Registration No Customs Station to which issued IEC of R.A. holder if different from DEPB holder DUTY CREDIT AMOUNT transferred Export FOB amount transferred Invoice No MAWB/BL No./DT HAWB/HBL No./DT. Conditions, if any If the DEPB is already registered in the System and having sufficient balance in the Duty Credit and Export FOB value is available, the System will print a check list of TRA. The check list shall be verified by the DEPB holder. If the particulars are correct the check list will be signed by the DEPB holder and returned to the proper officer who will exercise the option for issue of TRA in the System. The System shall generate three copies of the Release Advice titled as: 1. Customs copy for port of issue (office copy), 2. Customs copy for port of clearance and 3. Importer's copy. (iv) The office copy for port of issue shall be retained by the TRA issuing Customs Station and placed in the respective TRA file. Customs copy for the port of clearance will be dispatched to the respective Customs Stat....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ilable to the license is zero, the DEPB exemption will not be admissible to that item. System will not allow exemption under Notification 034/97, etc. for that item. 11.7 Check List of B/E After data entry, checklist will be printed as usual and given to the Importers/Customs Brokers for verifying the correctness of data captured. For identification against the respective item, „(DEPB)" and Notification 034/97 will appear. At the end of the check list, a statement of debits of EXPORT FOB (= import CIF) and duty sought to be debited, DEPB wise against an item S. No. of an invoice, will also be printed. The importers/ Customs Brokers should check the details of DEPB No. carefully to ensure that only that DEPB would be debited which he intended to do so. If the entries are correct, the checklist may be returned to the data entry operator for submission of B/E in the System. Errors, if any, noticed may be got corrected by the data entry operator. 11.8 Submission of B/E On submission of the B/E in the System, an UN-ASSESSED copy of the B/E will be printed by the System containing statement of debit of DEPB for export FOB and du....
X X X X Extracts X X X X
X X X X Extracts X X X X
....mount will be debited to the duty credit in DEPB. The CIF of the related items will be debited to export FOB in the DEPB. Where exemption from additional duty is not claimed, only basic duty will be debited. These debits will be made by the System in the DEPB Ledger. If more than one DEPB is utilized against an item, only CIF 'amount to be debited against each DEPB should be indicated by the importers. The duty amount will be proportionately calculated by the System for debit in the DEPB. The importers, therefore, should ensure that sufficient balance in the duty credit amount and export FOB is available in the DEPB to cover amounts of both components, for debiting, failing which the system will not accept the declaration for the B/E. In case the importer desires to utilize the DEPB for part of the quantity of an item in the invoice, he may split the quantity of that item and prepare the declaration accordingly. 11.11 Debiting of DEPB against Manual B/E (i) If a Bill of Entry is processed manually, importers may choose to avail the exemption under the DEPB Scheme and get the DEPB debited for exempted amount of duty. In such cases, ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ual B/E is debited or reduction is made by amendments. To avoid any inconsistency and invalidity, the system will sum the value of all items and compare with the face value of the license. If the sum' is greater than face value of license, the system will not permit registration. The value will always be CIF for imports and FOB in respect of exports. Where the value is in foreign currency it should be only one currency and not in multi-currency. The license holders, therefore, should check these details in their licenses and ensure that the same are correct before presenting the license for registration. The licenses with incorrect details will be rejected by the system and cannot be used for availing exemption from duty and clearance of goods. Such licenses should be corrected from the concerned DGFT office before presenting to Customs. (ii) In pursuance of CBEC"s Circular No. 11/2007 dated 13th February, 2007 and Circular No. 3/2009 dated 20th January, 2009 issued from F. No. 605/210/2005-DBK and F. No. 605/70/2008-DBK respectively, a procedure for online transmission of Shipping Bills and Licenses/Authorizations issued under Duty E....
X X X X Extracts X X X X
X X X X Extracts X X X X
....esh TRAS will be registered in the EDI System. Partially utilized TRAS will continue to be handled manually. (iii) After successful entry of details, a checklist will be printed by the service centre operator and given to the RA holder for confirming the correctness of the data entered in the system. Service center operator will make the correction, if. any, and will return the same to the RA holder. 12.4 Submission of License/TRA in the system The license/ TRA holder will present the check list of the license/TRA along with the original documents to the proper officer. The officer will compare the details entered in the system with the original license/TRA. After satisfying himself with its correctness, Officer will submit the license in the system on the basis of the job number of the check list. The system will generate a license Registration. No. This registration number and date should be endorsed in bold on the original license/TRA. After registration, the documents may be returned to the Importer and copies thereof may be kept in the office file for record. TRA will be registered only on the basis of Customs copy of the TRA. Af....
X X X X Extracts X X X X
X X X X Extracts X X X X
....sum of value of all items including the value of spares imported against EPCG license will not exceed the total face value of the license.. (ii) No credit of value will be given for spares in case of imports against TRA. It may be noted that TRA is required to be obtained for spare parts also. In case of first import, no TRA will be admissible for spares. 12.8 Amendment of license after registration Amendment in the license data after registration can only be made by the authorized officer. If the amount of value and quantity sought to be reduced is less than the unutilized balance available in the license, amendments for reduction of value and quantity will not be permitted by the system. The system will give credit to quantity or value in the case of increase and will debit the quantity or value in the case of reduction. Therefore, only incremental or decremental quantity or value should be entered in respect of increase or reduction. License status code at the time of registration will be '0'. The license, if suspended or cancelled after registration, the officer shall amend the status code to '2', '3' and '4' for cancellation, ....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... 7B DEPB 7D DEEC Advance authorisation 7G EPCG 7H 22 to 28 (Except 26), 35,36,37 Chapter 3 schemes 71 DFIA(26) 7N 08-09 7R DFRC EOU (ii) 7U All the Bs/E in respect of schemes for which no sub-group is created will be dealt by Group 7. (iii) The Customs Broker / Importer should present the check list obtained after submission of the B/E to the Appraiser along with all the required documents and the related license and Advance Authorization schemes. The Appraiser will check the correctness of details of license/Scheme, etc. and also ensure that any amendments made in the licenses/ Schemes, subsequent to registration of license, have also been entered in the system. If the Assessing officer is satisfied about the eligibility of exemption under related notification and the license is otherwise valid to cover the goods in question, he may assess the B/E on system. The Assessing officer can remove the notification and deny the benefits of exemption. The debits of license will automatically reverse when exemption notification is denied. The procedure of assessment will be similar to DEPB i....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... Bond for 100%EOUS. (ii) No - 'Y' for Bond For a Bill of Entry for imports by 100% EOU indicate: if Bond is already executed with Customs at the point of import; 'C' C.Ex. Certificate No DT ." where the Bond is executed with Central Excise authorities; and a procurement certificate has been issued by them and 'N' where neither Bond is executed nor Central Excise Certificate is obtained before presenting the Bill of Entry. Where the option given is 'N', the system shall require the Bond to be executed after assessment but before registration of B/E for examination & out of charge. Procedure for registration of Bond/B.G. has been separately indicated in Para 21.2 of this Public Notice. The importer should indicate in the format, the type of Bond as "EO" for 100% EOUS and indicate details of the Bond No. or the Central Excise certificate, as Scanned by CamScanner the case may be. If Bond or Central Excise Certificate are not indicated it would be 'N', i.e. NONE. The data entry operator shall enter the related option 'Y' or 'C' and enter the details of the Bond or the certificate, as the case may be, in the respective field i....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... the amount for debiting the Bond, he can select through change option and change the amount for the Bond debit & BG. Where the BG is not required, the amount in the field of BG should be entered as 0 (Zero).The appraiser has the option of removing EOU notification where the importer is not found to be eligible for the exemption. (iii) Where the importer has not furnished Bond or central excise certificate, the system will require the assessing officer to specify the Bond amount / BG amount. The Appraiser shall specify the Bond & Bank Guarantee amount in system. After processing by the Appraiser, the B/E will be audited by the Auditor and thereafter processed by the AC/DC. After the assessment, print of the Bill of Entry can be obtained. The details of the Bond / BG shall be printed on the Bill of Entry where neither Bond is debited nor is a central excise certificate indicated, the system will print the Bond / BG requirements as specified by the Appraiser. Scanned by CamScanner (iv) In case the importer has executed the Bond with the central excise authorities, he shall produce the procurement certificate issued by the central ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....15-2020 would follow registration as prescribed in Para 12.1 (ii). The scrips issued under older FTP would follow registration prescribed in Para 12.1(i). The other applicable procedures as prescribed in FTP and Customs notifications, circulars etc would be same as detailed in Para 11 & 12, wherever applicable. 15 EX-BOND Bill of Entry 15.1This procedure will apply only to those ex-Bond Bills of Entry in respect of which the related warehousing Bill of Entry (Into Bond Bill of Entry) has been processed under ICES (Import) at the same Customs station. In the Format of Declaration at Service Center for data entry, the following details will undergo a change. Option has been enabled in ACB ( AC Bonds ) role for entering the warehousing details as per Board Circular No. 019/2016 dated 20.05.2016. Same may be used for entry of warehousing particulars and generation of Warehouse Code in the system. Type of Bill of Entry (H) For Home Consumption Scanned by CamScanner (W) For Warehousing (X)For Ex-Bond: Warehouse B/E No. ---,DT--- and Warehouse Code (i) Warehouse Code consists of 4-digit location code; 1-digit warehouse type; ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....Bond Section and get suitable endorsement on the B/E with respect to debit of Bond amount and other details. 15.4 Printing of Assessed B/E and Duty Paying Challan After the B/E has been assessed by the Appraising Officer, the Assessed copy of the B/E and duty paying challan will be available for printing at service Scanned by CamScanner center. The same should be obtained by the Importers/ Customs Brokers from the service center operator. 15.5 Payment of Duty Duty will be paid at the designated bank against a challan of Ex-Bond B/E in the same manner as in the case of a Home consumption B/E including e- payment. 15.6 Order of Clearance of Goods for Home Consumption (i) After payment of duty and completing any other requirement of debiting of Bond, license, etc. the assessed Ex-Bond B/E along with all other documents should be presented to the Superintendent authorized to give Out of Charge of the Ex-Bond B/E. The Superintendent shall verify that:- a) The particulars in the Ex-Bond B/E correspond to the Bond register maintained in the Bond Section; b) The goods are being cleared within the validity period of the Bond, ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....he respective type of Bond in the system before filing of the B/E. The Bond will be registered by the importers specifically for a notification. Details of the Bond, in respect of each notification should be furnished at S. No. 18 in the Format for declaration at Service Centre for data entry of B/E. The system will automatically debit the respective Bond for the amount of duty foregone on the Scanned by CamScanner basis of claim of exemption made for items in the B/E under a notification. For this purpose, a directory has been created in the system for the notification and S.No. of item in the notification which require execution of end use Bond, undertaking or re-export Bond for availing exemption. Exemption under such notification will not be permitted by the system if the respective Bond/undertaking number has not been entered at the time of data entry of B/E. Therefore, all the importers who are claiming benefits of such exemption notifications should get respective Bond accepted and registered in the system as continuity Bond of that category in respect of each notification separately. The Bond registered for one notification canno....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... 03/2016 dated 03/02/2016 regarding Indian Customs Single Window Project extending to other locations and Participating Government Agencies. Scanned by CamScanner Certain notifications require certificates for eligibility of exemption from various other organizations like the Ministry of External Affairs, Defense, etc. Such certificates can be entered in the system under the category of Misc. Certificates = 'MC'. The following details will be entered; MC number and date Issuing authority and address Such certificates can be viewed by Assessing Officer and also will be printed on the B/E for verification in the Shed/Docks. 19 Closure of Bond / Undertaking The Bond or undertaking would be closed by the AC/DC. When the conditions of the Bond/undertaking are complied with, the AC/DC will enter the Bond No., the system will display all the Bs/E and related Item S.Nos. in respect of which the Bond has been debited. If the conditions of the Bond have been satisfied, the option to close the Bond may be exercised, item by item. When all the items against which respective Bond has been debited are closed, the Bond can be cancelled. ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....Credit of Bonds for EDI B/Es and Manual B/Es Closure of Bonds, Bank Guarantees Enhancements Generating data for Issue of recovery notices Generating data for Issue of reminders Generation of MIS reports (ii) The Revolving / continuity and the Specific Bonds will be registered and maintained in the Bond Section. The Appraising Officer determines the Bond requirement. The type and the amount of Bond are decided by the Appraising Officer and are approved by the Assistant Commissioner. However system will assist in determining the type of Bond / BG and value. Bond requirement details will be printed on the BE after the assessment. The details include the type of Bond, amount and the Bank Guarantee. The Bonds will be managed centrally by Bond/BG Section. 21.2 Registration of Bond (i) The Bond module provides for registration of all Bonds / Undertakings, Bank Guarantees, Sureties, etc. in the system. The importer shall furnish the following details for registration: - Bonds Undertakings 1.JEC 2.Bond Type 3.Bond Amount * 4.Revolving Specific 5.Date of Bond 6.Date of Expiry 7.Date of enforcement 8.Whether BG Y/N ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....o. to start with Serial No. 100001. 21.3 Processing of Bill of Entry (with Bond) (i) (a) Declaration in the Service Center In case the importer has already registered a Continuity Bond with the Bond Cell, he has to specify the type of Bond and Registration Number in the Service Centre declaration. However, the Bond value and BG amount is determined by the Appraising Officer. If Continuity Bond is not there, no declaration (Bond) needs to be given in the Service Centre. Bond details will be printed on the Checklist. (b) In case of EOU Bond already submitted at the Central Excise Commissionerate / Office, the Certificate Number has to be provided. If Certificate Number is declared, EOU Bond is not required. (ii) Appraising The Appraising Officer has the option to ask for Bond as the condition of assessment. The following type of Bonds can be opted: Scanned by CamScanner (iii) Provisional Duty Bond - General Test Bond End Use Bond / Undertaking Transit Bond Provisional Duty Bond - Project Imports Extra Duty Deposit EOU Bonds Warehouse Bond B/E Type 'W': Warehouse Bond is mandatory. EOU Bond: In case....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... Ledger Format B/E No. B/E Date Type of Document (manual or EDI) Debit Amount (Specified by AO) Credit amount Date of debit/credit Officer Id. v) Timely cancellation of Bonds: Customs Please refer to the CBEC Instruction No. 605/71/2015/DBK dated 02/12/2015 read with CBEC Circular No. 05/2010 dated 16/03/2010 and Instruction No. 609/119/2010DBK dated 18/01/2011. The formations shall duly verify and confirm the details of the importers and fulfillment of their export obligation preferably through the concerned Central Excise Division and accordingly ensure timely and transparent cancellation of bonds. (vi) Debiting of the Bond for manual Bill of Entry: (a) Continuity or a specific Bond shall be accepted & registered in the system. A continuity Bond registered in the system can be utilized in respect of electronic as well as manual Bills of Entry. For debiting manual Bill of Entry, the Bond officer shall select the option of MBE-debit and enter the details of the manual Bill of Entry and amount of Bond / BG etc. After debiting, a debit slip will be generated which can be printed one copy of slip should be attache....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ionally for assistance of the Appraiser for determining the amount of Bond / BG for debiting. The Appraiser can change the amount of Bond and/or B.G. for debiting. If the Bond details have not been entered at the time of data entry, the system will enforce Bond requirement. The Appraiser shall specify the amount of Bond and bank guarantee. The duty, if any, assessed shall be deposited with the designated bank, as usual. The Bill of Entry will not be registered in the shed / a dock for examination and out of charge till the duty is paid and the Bond and BG as specified have been debited. The details of Bond debit or the Bond requirements shall be printed on the provisionally assessed B/E. Details of a debited Bond will also be printed on the Importer's copy and Exchange control copy of B/E. (b) In case any Cash deposit is required to be taken, the Appraiser can specify the amount of Cash deposit, the Challan for Cash deposit will also be printed with the assessed copy of B/E which will also be deposited with the designated bank like the duty and fine/penalty. (c) Facility has also been provided in ICES 1.5 to finalize the assessments o....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... The Appraiser assessing the B/E will also be able to change the rate or value of High Sea Sales charges through change option. Principles of natural justice would need to be followed wherever required. The details of the rate or value of High Sea Sales Charges and the IEC with name of the Seller will also be printed on the assessed copy, & Importer's & Exchange Control copies of the B/E. 23. Assessment Involving RSP /NCCD: (i) Provisions have been made in the Indian Customs EDI-System (ICES) for assessment of goods leviable to additional duty under section 3(1) of the Customs Tariff Act, 1975 based on RSP and NCCD. The declaration form to be filed at the service centre by the importers/Customs Brokers shall be amended as follows:- (ii) If any of the items is leviable to additional duty under Section 3 of CTA, 1975 with reference to the retail sale price declared on the article the relevant column should be filled (Y/N). If yes following particulars should be furnished. Invoice S No Item Sr No. No. of Units Retail Sale Price Rs. Per unit......" Description No.------- (with specifications) ..... (iii) The importers/Cu....
X X X X Extracts X X X X
X X X X Extracts X X X X
....by the importer to ensure that correct and complete declaration has been filed by them. The Provisional Revenue Deposit Amount (i.e. either 1% or 5% of Assessable Value, as the case may be) of the Bill of Entry shall be paid electronically on a separate TR-6 challan in Triplicate. The EDD challan may be generated by Appraiser and e-payment may be made against such challan. Bill of Entry will then be presented to Import Shed and EDD payment will be verified in the system by the Shed Appraiser/Superintendent. He shall also verify on the Customs Copy of B/E to the effect that debit has been made in the Bond. Shed Appraiser/Superintendent shall also make an endorsement on the importer copy and exchange control copy (duplicate and triplicate) of B/E that the B/E has been assessed provisionally due to SVB issue and also ensure that details are available for that Bill of Entry. 24.2 Post clearance: After final order is given by the Special Valuation Branch, the final assessment shall be carried out in the system. 24.3 Renewal of SVB Orders and Ongoing SVB inquiries: Please refer to the CBEC Circular No. 04/2016 dated 09/02/2016 For ....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... correct Serial No. of the item and producer/export for applying the relevant rate of duty. The notification directory is available at 'www.cbec.gov.in' and www.icegate.gov.in' websites. The directory can be downloaded from the said websites for reference. (ii) Filing of Bill Of Entry The importer would be required to declare the Anti-dumping notification, and Serial No. of producer/exporter against the country of origin/export. These details may be declared in Col. (3) of the Table 39B (Classification Details) of Appendix-A the Format for Declaration at Service Centre for Data Entry. The extract of the Table is indicated below. 39B. Classification Details (1) Invoice Serial Number (2)Actual Invoice Number (3) Classification Details No. digit CTH Notion No 5 No QTY NotfY: SINO. CTHINotfa. SIND. 1 2 3 4 5 6 7 8 9 Abbreviations in Col. (3) above refer as under. = AD Notin. Anti-dumping notification number/year IS No. Item S.No. in the notification = PS No. Producer/exporter S.No. against the respective country = 10 QTY Quantity of goods in the units of measurement on which anti-dumping rate has been fixed,....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... value fixed. 27 Assessment of Bill of Entry The tariff value is itself the assessable value, therefore, invoice value will be ignored by the system and the duty would be calculated on the basis of tariff value. If the Tariff value is in any foreign currency, the same would be converted into Indian rupees on the basis of exchange rate applicable to that currency as applicable on the date of filing of the Bill of Entry. For the purpose of computation of value for additional duty under section 3(2) of Customs Tariff Act, 1975, the Basic Customs Duty and the assessable value based on tariff value shall be added. In case the importer has not declared the Tariff value, the Appraiser at the time of assessment will get a systems alert for tariff value. The Appraiser will have the option to select the tariff value and also change the S.No. of the Tariff value if incorrectly declared by the importers. The rate of Tariff value will be printed on the check list as well as on the copies of Bill of Entry. 28. Levy of Addl. Duty For Non-Excisable Goods In respect of goods not leviable to Central Excise Duty under the Cent....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ector, Inspection and Audit, Central Excise, Ahmedabad. 10. Director, Directorate General of Foreign Trade, Ahmedabad. 11. A.G.I.O. W.R.U. New Delhi. 12. ADG, DRI / DGICCE, Ahmedabad. 13. Dy. General Manager (Planning), State Bank of India, New Delhi. Scanned by CamScanner APPENDIX-1 EDI Locations for Customs broker Registration S.No POL SECTION LOCODE SITE ADDRESS ACC BANGALORE BENGALURU INTERNATIONAL AIRPORT ICD WHITEFIELD PLANTATIONS, HOSKOTE, BANGALORE ICD TARAPUR, MAHAGAON, TARAPUR, THANE, MAHARASHTRA NEW CUSTOM HOUSE, BALLARD ESTATE, MUMBAI - 400038 AIR CARGO COMPLEX, SAHAR, ANDHERI(E) MUMBAI 400099 ICD CONCOR BHUSAWAL B/H SAYALI HOTEL, BHUSAWAL ICD CHINCHWAD CONCOR RLY GOODS SHED CHINCHWAD PUNE ICD DIGHI TALERA NAGAR PUNE ALANDI ROAD DIGHI PUNE PCCCC.BANDRA KURLA COMPLEX BANDRA(E) MUMBAI 400051 ACC JANORI, JANORI DINDORI. DIST NASIK, PIN-422207 ICD JANORI JANORI DANDORI DIST NASIK PIN-422207 ICD MULUND, MUMBAI, MAHARASHTRA ICD MALIWADA. DAULATABAD, AURANGABAD JNCH, NHAVA SHEVA, TAL URAN, DIST-RAIGAD-400707 CFS NASIK, COMPLEX OF CWC AMBAD NASIK MAHARASHTRA F-II BLOCK, YESHWANT NAGAR, PIMPRI, PUNE 40001....
X X X X Extracts X X X X
X X X X Extracts X X X X
....CD PANTNAGAR, UTTARAKAND INHYD4 ACC SHAMSHABAD AIRPORT DIST RANGA REDDY HYDERABAD INSNF6 ICD SANATHNAGAR HYDERABAD. 500018 INTMX6 ICD THIMMAPUR. 11-60/5-7 THIMMAPUR. 509325. AP Scanned by CamScanner 7 INDORE - ININD6 INBOK6 INCHJ6 INDHA6 INIDR4 ININD6 INMDD6 INNGB6 INNGP6 INRAI6 INRTM6 INPRK6 8 KANDLA - INIXY1 INIXY1 ICD BORKHEDI, NAGPUR DIST, MAHARASHTRA BHUGAON LINK ROAD, WARDHA, MAHARASHTRA M/S PEGASUS ICD, VILL-DHANNAD, INDORE, MP-453001 ACC DEVI AHILYABHAI HOLKAR AIRPORT INDORE MP ICD 113 CONCOR COMPLEX SECTOR III PITHAMPUR DHAR ICD MADIDEEP 34-A1 NIA DIST RAISEN MP 462046 MIDC IND AREA, BUTIBORI, NAGPUR. MH 441122 ICD NAGPUR NR NARENDRA NAGAR NAGPUR 440027 ICD RAIPUR NEAR GOODS-SHED KAPA RAIPUR 492009 CONCOR ICD.NR LOCO SHED.JAORA RD RATLAM (MP)457001 ICD POWARKHEDA, HOSHANGABAD, M.P. CUSTOM HOUSE, NEAR BALAJI TEMPLE, KANDLA - 370210 9 JAIPUR - INJA16 INBGK6 INBHL6 INBWD6 INJA14 INJAI6 INJUX6 ICD CONCOR NEW POWER HOUSE BHAGAT KI KOTHI JODHPUR ICD BHILWARA SECTOR 5 AZAD NAGAR BHILWARA 342005 ICD RAJSICO SECTOR 9 UIT COLONY BHIWADI RAJASTHAN ....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... INNML1 NEW CUSTOM HOUSE, PANAMBUR, MANGALORE 575010 Scanned by CamScanner 15 RAXAUL LCS - INJBNB INRXLB LCS JOGBANI, DIST: ARARIA, BIHAR INRXLB LCS RAXAUL. DIST: EAST CHAPARAN, BIHAR 16 AHMEDABAD - INSB16 INAKV6 INAMD4 INBED1 INBRC6 INDAH1 INHIR6 INHZA1 INKBC6 INMDA1 INPAV1 INSAC6 INSAU6 INSB16 INVP16 INSAJ6 INHIR6 INBHU1 ICD ANKLESHWAR OPP ONGC TNSHIP OLD NH8 ANKLESHWAR ACC AHMEDABAD OLD AIRPORT, SAHIBAUG AHMEDABAD 12 BEDI PORT JAMNAGAR GUJRAT ICD DASRATH VADODARA GUJARAT -391740 DAHEJ PORT CUSTOM HOUSE DIST. BAROACH GUJARAT SURAT HIRA BOURSE, KATARGAM, SURAT, GUJRAT HAZIRA PORT, CHORYASHI, BYPASS RD, HAZIRA. SURAT KRIBHCO INFSTR LTD. HAZIRA, KRIBHCO NGR, SURAT, GUJRAT MAGDALLA PORT URMI COMPLEX SANGRAMPURA SURAT CUSTOM HOUSE, GPPL PIPAVAV RAJULA, AMRELI GUJARAT SURAT DIAMOND PARK. GIDC, SACHIN, SURAT-394230 ICD THAR DRY PORT KADI ROAD SANAND AHMEDABAD ICD SABARMATI KALIGAM SABARMATI AHMEDABAD 382470 ICD VALVADA NH8 TALUKA UMBERGAON VALSAD GUJARAT ICD TUMB, UMBERGAON. DIST VALSAD GUJARAT SURAT HIRA BOURSE, SURAT CUSTOM HOUSE, BHAVNAGAR 0 17 AIR CA....
X X X X Extracts X X X X
X X X X Extracts X X X X
....) Name of the person Designation Address City PIN State Email id Telephone Numbers Date: Place: Signature of the applicant Scanned by CamScanner APPENDIX-4 Currency Codes CURR_CD CURR_DESC CNTRY_CD AFA AFGAHANI AF ALL ALBANIAN LEK AL DZD ALGERIAN DINAR DZ ADP ANDORAN PESTA AD AON ANGOLAN NEW KWANZA AO XCD EAST CARRIBEAN DOLLAR ΑΙ ARS ARGENTINE PESOS AR AMD ARMENIAN DRAM AM AWG ARUBAN GUILDER AW AUD AUSTRALIAN DOLLAR AU ATS AUSTRIAN SCHILLING AT AZM AZERBAIJAN MANAT AZ BSD BAHAMIAN DOLLAR BS BHD BAHRAINI DINAR BH BDT BANGLADESH TAKA BD BBD BARBADOS DOLLAR BB BYB BELARUSSIAN RUBLE BY BEF BELGIAN FRANC BE BZD BELIZE DOLLAR BZ XOF CFA FRANC BJ BMD BERMUDIAN DOLLAR BM BTN BHUTAN NGULTRUM BT BOB BOLIVIAN BOLIVIANO BO BAM NEW DINAR BWP BOTSWANA PULA BW NOK NORWEGIAN KRONES BRL BRAZILIAN REAL USD US DOLLAR AS BND BRUNEI DOLLAR BGL BULGARIAN LEV BG BIF BURUNDI FRANC BI K....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... MX MDL MOLDOVAN LEU MD MNT MONGOLIAN TUGRIK MN MAD MORACCAN DIRHAM MA MZM MOZAMBIQUE METICAL MZ NMK KYAT MM NAD NAMIBIA DOLLAR NA NPR NEPALESE RUPEE NP NLG NETHERLANDS GUILDER NL NETHERLAND ANTILLIAN ANG GUILDER AN Scanned by CamScanner NICARAGUAN CORDOBA NIO ORO NI NGN NIGERIAN NAIRA NG OMR RIAL OMANIS OM PKR PAKISTANI RUPEE PK PAB PANAMAN BALBOA PA PGK KINA PG PYG PARAGUAY GUARANI PY PEN PERUVIAN NUEVO SOL PE PHP PHILLIPINES PESOS PH PLN POLISH ZLOTY PL PTE PORTUGUESE ESCUDO PT QAR QATARI RIAL QA ROL ROMANIAN LEU RO RUR ROUBLE RU RWF RWANDA FRANC RW SHP ST. HELENA POUND SH WST TALA WS STD DOBRA ST SAR SAUDI RIYAL SA SCR SEYCHELLES RUPEE SC SLL LEONE SL SGD SINGAPORE DOLLAR SG SKK SLOVAKI KORUNA SK SIT SLOVENIAN TOLAR SI SBD SOLOMAN ISLANDS DOLLAR SB SOS SOMALI SHILLING SO ZAR RAND ZA ESP SPANISH PESETA ES LKR SRI LANKA RUPEE LK....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... AQ ANTARTICA AR AS ARGENTINA AMERICAN SAMOA AT AUSTRIA AU AUSTRALIA AW AZ BA BB BD ARUBA AZARBAIJAN BOSNIA & HERZEGOVINA BARBADOS BANGLADESH BE BELGIUM BF BURKINA FASO BG BULGARIA BH BAHRAIN BI BURUNDI BJ BENIN BM BERMUDA BN BRUNEI BO BOLIVIA BR BRAZIL BS BAHAMAS BT BV BW BHUTAN BOUVET ISLAND BOTSWANA BY BELARUS BZ BELIZE CA CANADA CC CF CG CH CI COCOS (KEELING ISLANDS) CENTRAL AFRICAN REPULIC CONGO SWITZERLAND COTE D IVOIRE CK COOK ISLANDS CL CHILE CM CAMEROON CN CHINA CO COLOMBIA CR COSTA RICA CU CUBA CV CAPE VERDE ISLANDS CX CY CYPRUS CZ CHRISTMAS ISLANDS CZECH REPUBLIC DE GERMANY DJ DJIBOUTI DK DENMARK DM DOMINICA DO DOMINICAN REPULIC Scanned by CamScanner DZ EC ALGERIA ECUADOR EE ESTONIA EG EGYPT EH WESTERN SAHARA ER ERITREA ES SPAIN ET ETHIOPIA FI FINLAND FJ FIJI FK FALKLANDS ISLANDS FM FO MICRONESIA FAEROE ISLANDS ....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... SINGAPORE ST HELENA & ASCENSION ISLAND SLOVENIA SVALBARD AND JAM MAYEN ISLANDS SLOVAK REPUBLIC SIERRA LEONA SAN MARINO SN SENEGAL SO SR ST SV SY SZ TC TD TF TG TH TJ TK TM TURKMENISTAN TN SOMAALIA SURINAM SAO TOME AND PRINCIPE EL SALVADOR SYRIA SWAZILAND TURKS & CAICOS ISLANDS CHAD FRENCH SOUTH & ANTARTIC TERR TOGO THAILAND TAJIKISTAN TOKELAU ISLAND TUNISIA TO TONGA TP EAST TIMOR TR TURKEY TT TRINIDAD & TOBAGO TV TUVALU TW TAIWAN TZ TANZANIA UA UKRAINE UG UGANDA UM US UY UZ VA VC VE VG VI VN VU WF WS YE UNITED STATES MINOR OUTLAYING ISLANDS UNITED STATES URUGAY UZBEKISTAN VATICAN CITY STATE (HOLY SEE) ST VINCENT VENEZUELA BRITISH VIRGIN ISLANDS US VIRGIN ISLANDS VIETNAM, DEMOCRATIC REP. OF VANUATU WALLIS AND FUTUNA ISLANDS SAMOA YEMEN, DEMOCRATIC YU YUGOSLAVIA ZA SOUTH AFRICA ZM ZAMBIA ZR ZAIRE Scanned by CamScanner 100 01 102 03 Advance License 04 05 06 07 08 09 10 ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....nd Depb (Pre-export) 79 EPCG Drawback and DFIA 80 EPCG, Drawback and Advance Licence for annual requirement 81 DFIA and Drawback 198 Free Shipping Bill involving Indian Currency 99 NFEI The list of scheme code is available at ICEGATE website at: https://www.icegate.gov.in/Webappl/scheme det.jsp Scanned by CamScanner ANNEXURES ANNEXURE - A LICENCE DATA ENTRY FROM LICENCE MASTER DETAILS EXIM SCHEME CODE DGFT FILE NO. IN LICENCE EXEMPN NOTFN. NO. BASIS (QV-QTY (VALUE) (FOR ADVANCE LICENCE) DEEC NO/DATE ISSUED BY (DGFT CODE) TRANSFERABLE (Y/N) PORT OF REGISTRATION LICENCE NO & DATE RECEIPT NO (IF EXPORT"S PRIOR TO ISSUE OF LIC. LICENCE EXPIRY DATE IMPORT END DATE EXPORT END DATE LICENCE EXTENDED Y/N LIC EXTEND DATE IE - CODE IE BRANCH CODE EXPORTER TYPE TOTAL FOB OF EXPORTS IN FOREIGN RUPEES TOTAL FOB OF EXPORTS IN FOREIGN CURRENCY F.C. CODE TOTAL CIF IN RUPEES TOTAL CIF IN FOREIGN CURRENCY FC CODE IO NORM VALUE ADDITIONAL LIMITING FACTORS - VIQ/B CONDITION EXPORT COMPLETED (Y/N) BOND NO. OBLIGATION Scanned by CamScanner ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ss Section 46 (1) Proviso Case : Yes/No If Yes, reasons 6. Special requests, if any (A) First Check requested : Yes/No (B) Green Channel facility for clearance without examination requested : Yes/No (C) Urgent clearance requested against temporary documentation (Kachcha B/E): Yes/No (D) Extension of time limit requested under Section 48 If yes, reasons for late filing of BE : 7. Port of Shipment 8. Country of Origin (If same for all goods of the consignment. otherwise declare at the item level at S.No.39) 9. Country of Consignment : Yes/No IGM Details: 10. 11. Whether it is Transshipment Cargo (to Sea or ICD): Yes/No Additional information for Transshipment Cargo (at Sea and ICDs) Name of the gateway port Gateway IGM Number (c) Date of entry inwards at gateway port: 12. (a) Import General Manifest (IGM) No./Year 13. 14. (b) Date of entry inward (a) Master Airway Bill (MAWB) No./ Bill of Lading (MBL) No. (b) Date (a) House Airway Bill No. (HAWB)./ House Bill of Lading (HBL) No. (b) Date 15. Marks & Numbers 16. (a) Number of Packages (b....
X X X X Extracts X X X X
X X X X Extracts X X X X
....reight, Insurance and other charges: Currency Rate (%) OR Amount 35. (a) Freight (b) Insurance (c) Loading, unloading and handling charges[ Rule 9(2)(b)] 1% (d) Other charges related to the carriage of goods (e.g. daughter vessel expenses, transit/ transshipment charges etc) Cost and services not included in the invoice value and other miscellaneous charges: Rate (%) OR Amount Currency (a) Brokerage and commissions (b) Cost of containers (c) Cost of Packing (d) Dismantling, transport and handling charges at the country of export or any other country (e) Cost of goods and services supplied by buyer (f) Documentation (g) Country of Origin Certificate (h) Royalties and license fees (i) Value of proceeds which accrue to seller (j) Cost of warranty services, if any, provided by the seller or on behalf of the seller (k) Other costs or payments, if any. to satisfy the obligation of the seller : (I) Other charges and payments, if any : 36. Discount, if any 88 37. 38. 39. : Yes/No If yes, (a) Nature of Discount (b) Rate (%) or amount Additional charges, if a....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... Para No./ Year of Exim Policy 34 B.1 Details of Quantity where duty rates on unit of measurement different than in the Invoice: (1) Invoice Serial Number: (2) Actual Invoice Number Item No. (1) CTH (2) QTY in KGS (3) QTY in SQM (4) C. In case of re-import, Shipping Bill Details: (1) Invoice Serial Number (2) Actual Invoice Number Item Shipping Shipping Sl. No Bill No. Bill date Port of Export In Invoice Invoice No. of Shipping Bill Item Sl. No. in Shipping Bill 1 2 3 4 5 6 Notification No./ Notification Payments made for export on Pro-rata basis (In Rs.) Calculated Customs Duty Calculated Excise Duty Sl.No 7 Freight 8 Insurance 9 10 11 D. Details relating to duty Exemption based on Exim Schemes and License particulars.: (1) Invoice Serial Number (2) Actual Invoice Number Scanned by CamScanner Addl. Duty Item Licens Item Exemption Notificatio License Debit Sl.No e Debit Sl. No Requeste n/ Regn. Value Unit in Invoice Regn. Qty ....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... generated alcohol which are not capable of being consumed as ordinary alcoholic beverages (1) Medicinal preparations containing self- 4 001023 generated alcohol which are capable of being consumed as ordinary alcoholic beverages (ii) All other containing alcohol which are prepared distillation or to which 4 alcohol has been added 001024 (iv) Medicinal preparations not containing 20 111030 alcohol but containing narcotic drug or narcotic 3 Homeopathic preparations containing alcohol 4. Toilet Preparations 4 001040 Toilet preparations containing alcohol or narcotic drug or narcotic 50 CODE DESCRIPTION OF GOODS Alcoholic Liquors for Human Consumption as notified under proviso to Section 3 ( 1 ) of AD VAL RATE SPEC UQC FOR RATE SPEC RATE СТÐ, 75 Goods of heading 220300 of Customs Tariff Act-75 002011 Not exceeding US $ 20 per case 150 002012 Exceeding US $ 20 but not exceeding US $ 40 per 100 case 002013 Exceeding US $ 40 per case 75 Goods of heading 220410 of Customs Tariff Act-75 002111 Not exceeding US $ 20 per case 150 0....