Condonation of Delay: directoral disputes and pending company proceedings can constitute reasonable cause, allowing a belated return to be treated as ...
Revisionary jurisdiction under section 263 upheld; faceless assessments subject to revision when AO fails requisite enquiries, remitted for fresh asse...
Limited scope of processing under section 143(1): enhancement without show cause is unsustainable; remand for residency, taxation and TDS verification...
Classification of the imported PVC four pipe extrusion line turned on the principal function test under Rule 1 read with Notes 3 and 4 to Section XVI. The Authority found that the system worked plastics by continuous extrusion through a die, with no clamping unit or mould cavity, so it was not an injection moulding machine. Because the extruder, die-head, calibration and cooling tanks, haul-off unit, cutter and control systems were functionally interdependent and directed to the single function of manufacturing PVC/CPVC pipes, the complete assembly was treated as a composite functional unit. It was accordingly classified under tariff item 8477 20 00 as extruders.
Classification of the imported PVC four pipe extrusion line turned on the principal function test under Rule 1 read with Notes 3 and 4 to Section XVI. The Authority found that the system worked plastics by continuous extrusion through a die, with no clamping unit or mould cavity, so it was not an injection moulding machine. Because the extruder, die-head, calibration and cooling tanks, haul-off unit, cutter and control systems were functionally interdependent and directed to the single function of manufacturing PVC/CPVC pipes, the complete assembly was treated as a composite functional unit. It was accordingly classified under tariff item 8477 20 00 as extruders.
Note: It is a system-generated summary and is for quick reference only.
TaxTMI 
of 4805
Join Channel
TaxTMI 
