TaxTMI 
TaxTMI 
Electronic Sealing-Deposit in and removal of goods from Customs Bonded Warehouses
X X X X Extracts X X X X
X X X X Extracts X X X X
....the same is reproduced hereunder: 2. The warehouse (Custody & Handling of Goods) Regulations 2016, the special Warehouse (Custody & Handling of goods) Regulations, 2016, Warehoused Goods (Removal) Regulations 2016 and Circular 17/2016-Cus. prescribe the affixation of "One Time Lock" for transport of goods to be deposited in a warehouse or removed there from. 3. The regulations require that goods arriving at the warehouse from a customs station shall be affixed with a one-time-lock with its serial number endorsed upon by the bill of entry for warehousing and the transport document. The warehouse keeper or bond officer, as the case may be, is required to inspect the seal and when it is found intact, permit the goods to be unloaded at the wa....
X X X X Extracts X X X X
X X X X Extracts X X X X
....6 & 37/2017 on www.cbic.gov.in) 5.1. Considering the fact that goods may be removed through a variety of vehicles, different types of RFID OTLs, such as bolt seals or wire - cable seal shall be used. The specifications, data elements and procedure to be used under the Regulations of Warehousing shall be as follows: 5.2 Seals: i. For Containers(RFIQ One Time Bolt Seal) As prescribed under circular No.36/2017 dated 28.08.2017. ii. For Closed Body vehicles (RFID Wire Cable Seal) (a) Each seal shall be a one time lock bearing a unique serial number and brand of the vendor in the format ABCD XXXXXXXX where ABCD stands for the brand of the vendor and X (8 digit) is a numerical digit from 0-9 (b) The RFID seal shall conform to ISO 1....
X X X X Extracts X X X X
X X X X Extracts X X X X
....tainerized or else not required) viii. Registration number of vehicle ix. Warehouse code x. Custom Location code c. The data elements to be captured in the web application in the case of removal of goods from a warehouse to another warehouse (Section 67) i. IEC importer Exporter Code ii. Bill of Entry Number iii. Date iv. REID OTL Number v. Date of Sealing vi. Time of seaiing vii. Container Number (where cargo is containerized or else not required) viii. Registration number of vehicle ix. Warehouse code(origin) x. Warehouse code(Destination) 5.5 Procedure (a) All licencees of Customs bonded warehouses shall have to procure Readers for scanning of RFID OTLs at the bonded warehouse at their own cost. (b) The....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... shipping bill or in the case of manual shipping bill, before the container or cargo is dispatched from the warehouse. (i) in case the REID OTL is found to be tampered at the Custom Station at the time of Export, then mandatory examination would be carried out by the Customs authorities. (j) In case at the time of arrival of the goods at the warehouse the RFID OTL is found to be tampered, then the licencee Shall not permit unloading of the goods and shall inform the bond officer[Please refer sub-regulation 5(1) and (7) of the warehouse Custody & Handling of goods, Regulations, 2016]. (k) Under Regulation (5) of the Warehouses goods (Removal) Regulations 2016, the importer or owner is required to produce an acknowledgement of the arriv....