TaxTMI 
TaxTMI 
Specified Goods falling within one or more Chapters Imported for Manufacture of Specified Goods - G.E. No. 193B
X X X X Extracts X X X X
X X X X Extracts X X X X
.... conditions, namely :- (i) an officer not below the rank of a Joint Director in the Department of Electronics of the Government of India or a Joint Director in the Directorate of Industries of the Government of a State or an Additional Industrial Adviser in the Directorate General of Technical Development of Government of India, as the case may be, is satisfied that the goods in question are required for the purpose as specified in column (4) of the said Table and recommends grant of the above exemption : Provided that this condition shall not apply in the case of goods imported against supplementary import licences; (ii) the importer shall, by the execution of a bond in such form and for such sum as may be specified by the Assistant Collector of Customs, bind himself to pay, on demand, in respect of such goods as are not proved to the satisfaction of the Assistant Collector of Customs to have been used for the said purpose, an amount equal to the difference between the duty leviable on such imported goods but for the exemption contained herein and that already paid at the time of importation. TABLE S. No. Chapter of the First Sche­dule to the Customs Ta­r....
X X X X Extracts X X X X
X X X X Extracts X X X X
....(iii) Glass epoxy unclad substrates (iv) Metal clad substrates (v) Ceramic/Alumina subs-trates Potentiometers, Hybrid microcircuits, Printed components, semicon­ductor devices. 19. 71 Silver alloy strips in coils of width upto 0.434 inches and thickness upto 0.006 inches Relays, connectors, switches. 20. 39 (i) Synthetic polyelectrolyte dispersant (ii) Polyethylene adduct and non-ionic surface acting material (ZUSOPLAST) lubricant Ferrites. 21. 74 Electrolytic tough pitch (ETP) Copper wire and wire rods Lead wire for electronic components, resistors (other than heating resistors), potentiome-ters, capacitors. 22. 74 (i) Solder plated brass strips upto 100 mm width (ii) Silver plated brass strips upto 100 mm width Potentiometers, connec-tors, switches, relays. 23. 39 (i) (a) filled, Flame retardant moulding powder/ granules and with  Nylon 6.30% glass or without other addi­tives Potentiometers, Connec­tors, Tape Deck Mecha­nisms. (b) Plain   and glass filled nylon/polyamide with or without other additives. Relays, connectors, switches, po....
X X X X Extracts X X X X
X X X X Extracts X X X X
....76, 78, 85 (i) Glue solvent resin in aliphatic alcohol (ii) Platinum Rhodium wire (iii) Aluminium wire with silicon or magnesium impurity of upto 2% (iv) Gold wire with phosphorous or antimony doping (v) Base solder (silver, lead, antimony based) (vi) Soft solder (lead, indium, silver based) (vii) Gold tin alloy (viii) Preforms, discs, dots, rings, wafers, plates, repartitors of the following materials : (a) Aluminium silicon (b) Gold boron (c) Molybdenum (d) Lead-tin solder (e) Silver antimony (f) Gold antimony (g) Silver Lead Indium (h) Silver Lead Antimony (i) Silver Lead Silicon Anti-mony (j) Solder (k) Lead Tin (l) Silver-Copper-Indium (m) Silver-Copper-Germani-um Arsenic (n) Berrylium Oxide Semiconductor devices. 33. 78 Lead foil Plastic film capacitors. 34. 85 Insulated or enamelled copper wire of 45 SWG or finer than 45 SWG Deflection components, Coils and transformers. 35. 74, 85 (i) Oxygen-free high con­ductivity (OFHC) copper wires, bars, rods, angles, shapes and sections, plates, sheets, strips, tubes and pipes (ii) Parts made of oxygen­free high conductivity....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... 76 Plain Aluminium Foil containing more than 99% Aluminium Etched or Formed Alumi-nium Foil Electrolytic capacitors or plastic film capacitors. 53. 70, 85 Fused Quartzware Semiconductor Devices, Halogen Lamps or Silicon in all forms. 54. 81 Tantalum Powder Tantalum Capacitors. 55. 32, 70, 85 (i) Glass frit or Glass Powder (ii) Glass preforms or pellets (iii) Glass Tubes Liquid Crystal Displays, Semiconductor Devices, Electronic Valves and Tu­bes, Glass to Metal Seals, Lead Frames, Transistor Headers, Reed Relays or Reed Switches, Delay Lines, Resistors (other than Heating Resistors), Mounted Piezoelectric Crystals, Capacitors, Con­nectors, Hybrid Micro­circuits, Printed Compo­nents, Electron guns and electron gun parts. 56. 39, 85 (i) Silicone rubber (ii) Parts/articles of silicone, Elastomer or Silicone rub­ber Solid Tantalum Capaci­tors, Liquid Crystal Dis­plays, Semiconductor De­vices, EHT Transformers, Potentiometers, Electro­lytic Capacitors, keypad switches. 57. 39 Silicone based resins, oils, varnishes, lacquers, elasto-mers, with or without additives Capacitors,....
X X X X Extracts X X X X
X X X X Extracts X X X X
....ectronic Valves and Tubes, X-Ray tubes, Semi­conductor Devices, Resis­tors and Resistive Arrays (other than Heating Resis­tors), Mounted Piezo­electric Crystals. 63. 81, 85 Tungsten and Tungsten alloys, wrought, in all forms and articles thereof Electronic Valves and tubes, Semiconductor De­vices, Resistors and Resi­stive arrays (other than Heating Resistors), Mou­nted Piezoelectric Cry­stals, Silicon in all forms, Metallised ceramic rods. 64. 39 Polyvinyl Alcohol Ferrites, Capacitors. 65. 39 Polyisobutylene Ferrites, Deflection com­ponents. 66. 39, 40 Chlorosulphonated Polyethylene (HYPALON) Ferrites, Deflection com­ponents, Capacitors. 67. 74 Phosphor Bronze Sheets/ bars/sections/flats/strips/ wire/rods/coils/pipes, with or without plating Relays, Semiconductor de­vices, Tape Deck Mecha­nisms, Connectors, Mag­netic Sound Heads, Mou­nted Piezoelectric Crys­tals, Potentiometers, Heat Sinks, DC Micro-motors upto 13.5 volts and not exceeding 20 watts rating, cassettes, parts of casse­ttes, T.V. tuner, telescopic antenna. 68. 72, 73 (i) Kovar Alloys in a....