Commissioning and commencement of operation of Drive Through Container Scanner (DTCS) at Syama Prasad Mookerjee Port, Kolkata (SMPK)- Procedure to be followed for containers selected for scanning at DTCS
X X X X Extracts X X X X
X X X X Extracts X X X X
.... ROAD, KOLKATA-700001 (WB) Date : 22-03-2024 Public Notice No. 07/2024(Port) Sub: Commissioning and commencement of operation of Drive Through Container Scanner (DTCS) at Syama Prasad Mookerjee Port, Kolkata (SMPK)- Procedure to be followed for containers selected for scanning at DTCS- reg. All the Importers, Exporters, General Trade, Port Terminal Operators, Shipping Lines, Shipping A....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... dated 18.03.2024. 3. The containers for scanning are selected by the Container Scanning Module (CSM) of the National Customs Targeting Centre for cargo (NCTC-Cargo) and an intimation of selection will be communicated through the designated email IDs of all stakeholders concerned such as SMPK, Shipping line, CFS, DC/AC (NSD), DC/AC of CFS/ICD, Port out gate Preventive Officer and the Container ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....S system works at optimum level when the trailer is driven in the "Scanning Tunnel" at a speed between 4 km/hour and 6 km/hour. There must be a minimum gap of 500 mm between trailer's Horse (driver's cabin) and container moving into the scanning tunnel for scanning due to safety requirements of DTCS system. The CFS/ICD/Shipping Line concerned will ensure the same. ii. After scanni....
X X X X Extracts X X X X
X X X X Extracts X X X X
....pre-gate corridor adjacent to the MXCS to NSD through Gate No. 08. iv. The CFS/ICD/Shipping Line concerned must ensure that the height of container taken for scanning is within permissible limits. In case, any Over Dimensional Container is selected for scanning, the same shall be informed to the Deputy /Assistant Commissioner of Customs of CSD and NSD. v. All the responsibility o....
TaxTMI