AI OCR 
TaxTMI 
TaxTMI 
TaxTMI 
SION - HB Vol.2 Amended
X X X X Extracts X X X X
X X X X Extracts X X X X
....8 shall be added as per Annexure "B" to this Public Notice. ENGINEERING PRODUCTS After the existing entry at Sl.No.C-1400, the new entries from Sl.No.C-1401 to C-1408 shall be added as per Annexure "C" to this Public Notice. FOOD PRODUCTS After the existing entry at Sl.No.E-72, the new entry as Sl.No.E-73 shall be added as per Annexure "D" to this Public Notice. PLASTIC PRODUCTS After the existing entry at Sl.No.H-400, the new entries from Sl.No.H-401 to H-406 shall be added as per Annexure "E" to this Public Notice. TEXTILE PRODUCTS After the existing entry at Sl.No.J-303, the new entries from Sl.No.J-304 to J-305 shall be added as per Annexure "F" to this Public Notice. 5. This issues in Public interest. (N.L. LAKHANPAL) DIRECTOR GENERAL OF FOREIGN TRADE Copy to all concerned; By orders etc., (ASHUTOSH MISHRA) Dy. Director General of Foreign Trade Issued from File No.01/83/44/19/AM99/DES-IV Annexure "A" to the Public Notice No.3 Dated 5.4.1999. AMENDMENTS/CORRECTIONS Sl.No. Page No. Reference Amendments/Corrections (1) (2) (3) (4) 1. 3 General Policy for Packing Material Note (4) After the words "blowing grade," appearing in this note, the words "Tape G....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... with quantity shall be amended to read as under:- "1. Erythromycin Thiocyanate OR 2.32 kg activity 1. Erythromycin Base 2.03 kg activity" 11. 68 Chemicals & Allied Products Sl.No.A428 The description of the export product shall be amended to read to read as under: "Tolnaftate BP/USP" 12. 72 Chemicals & Allied Products Sl.No.A467 The description of the export product shall be amended to read as under:- "4,4 Diamino Sulfanilide (100% Basis) 13. 97 Chemicals & Allied Products Sl.No.A661 The quantity of import item No.2 i.e. Acetic Anhydride shall be amended to read as "1.065 kg". 14. 136 Chemicals & Allied Products Sl.No.A985 The description of the import item 2 alongwith quantity shall be amended to read as under:- "Hydroxyl Amine Sulfate". 0.242 kgs 15. 181 & 182 Chemicals & Allied Products Sl.No.A1486 The description of the export product shall be amended to read as "Sodium Lauryl Sulphate 90%". (1) (2) (3) (4) 16. 182 Chemicals & Allied Products Sl.No.A1491 The norm covered by this entry shall be substituted by the following:- (1) (2) (3) (4) (5) A1491 Speciality Textile Lubricating Oil (STLO) 1 kg 1. Low Molucul....
X X X X Extracts X X X X
X X X X Extracts X X X X
..... Iso Propyl Alcohol 0.36 kg 4. Thionyl Chloride 1.13 kg 5. Activated Carbon 1.10 kg 27. 269 Chemicals & Allied Products Sl.No.A2003" The description of the export product shall be amended to read as under:- 5-Sodio Sulpho Dimethyl Isophthalate/ 5 Sulfo Dimethyl Isophthalate Sodium Salt". 28. 270 Chemicals & Allied Products Sl.No.A2009 The norm covered by this entry shall be substituted by the following:- (1) (2) (3) (4) (5) A2009 Perlite Powder 1 kg 1. Perlite Ore 1.175 kg (1) (2) (3) (4) 29. 271 Chemicals & Allied Products Sl.No.A2016 1. The word "(T.A.A.)" alongwith the description of the import item 2 shall be corrected to read as "(T.T.A.)". 2. In the import item 3, the following alternative item with quantity shall be added:- "OR BF3 Gas - 1.00 kg". 30. 272 Chemicals & Allied Products Sl.No.A2023 After import item 12, the following items with quantity shall be added:- "13. Sodium Borohydride 0.41 kg 14. Thionyl Chloride 1.35 kg". 31. 272 Chemicals & Allied Products Sl.No.A2026 The norm covered by this entry shall be substituted by the following:- (1) (2) (3) (4) (5) A2026 Citric Acid 1 kg 1. C....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... 39. 495 Engineering Products Sl.No.C506 1. The quantities of import items 2(a) and 2(c) shall be amended to read as "360 kgs" and "560 kgs" respectively. 2. The description of the import item 3(ii)(c) shall be amended to read as under:- "Copper Lined Mould/ Copper Mould for Casting". 3. After import item 3(ii)(j), the following item with quantity shall be added:-"(k)Silica Texture bellow Shroud". - 0.0052 Kgs 40. 510 Engineering Products Sl.No.C517 1. The quantity of import item 1(i) shall be amended to read as "360 kgs". 2. The description of the import item 1(iii) alongwith quantity shall be amended to read as under:- "1(iii)Metallurgical Coke".- 560 Kgs 3. The description of the import item 3(c) shall be amended to read as under:- "Copper Lined Mould/ Copper Mould for Casting". 4. After import item 3(l)(x), the following item with quantity shall be added:- "(xi)Silica Texture bellow Shroud". - 0.0052 Kgs 41. 516 & 517 Engineering Products Sl.No.C527 1. The description of import items at Sl.Nos. 6 and 7 shall be amended to read as under:- "6. Diamond/Compax Dies or Blanks 7. Used/new Plastic Bobbins/ Spools". 2. After import item 7, the following i....
X X X X Extracts X X X X
X X X X Extracts X X X X
....l Purpose Polystyrene (for protective cap) 1640 kgs 4. Aluminium Strip/Coil/Sheet (for spacer) 322 kgs 5. Polypropylene Pouch OR BOPP Film Printed or Plain Net + 1% wastage. 6. Krytox 0.6 kg 7. Grinding Wheel (Silicon Carbide and Aluminium Oxide), Slitting Wheel Upto 5% of FOB value of export (1) (2) (3) (4) 50. 570 Engineering Products Sl.No.C902 1. The description of the export product shall be amended to read as under:- "Galvanised/Perforated Alloy Steel C.A. Tubular C- Connector (Insulated) for Transmission Lines". 2. The description of the import item 1 alongwith quantity shall be amended to read as under:- "ERW Steel OR 1.26 MT HR Coil/Sheet 1.6mm to 5mm". 1.49 MT 51. 598 Engineering Products Sl.No.C1014 Import item 3 alongwith quantity shall be substituted by the following: - "3. Miscellaneous Items:- a)Grinding Wheel (with or without frame work) b)CBN/Diamond Honing Stick Blank/Support Stones/Deburring Tools c)Carbide Cutter d)Plain Grinding Wheels/CBN Wheels" Upto 3% of FOB value of export. 52. 616 Engineering Products Sl.No.C1064 1. The import item 3, shall be amended to read as under:- "3. Miscellaneous items: Gun D....
X X X X Extracts X X X X
X X X X Extracts X X X X
....l (to be allowed only for Hand Tufted Woollen carpets) 0.05 kg 11. Sodium Chlorite/Lyogen SMK 0.04 kg 12. Thinner 0.005 kg 13. Caustic Potash 0.14 kg 14. Dyes Stuffs (Acid/Metal complex) 0.043 kg 15. Natural Latex (to be allowed only for Hand Tufted Woollen Carpets) 0.15 kg *Out of which, quantity of Hydrogen Peroxide shall not exceed 0.001 kg. Note.1 Against export of Multicoloured Designed Hand Knotted Woollen Carpets, the following items with quantity may be allowed per 1000 kgs of export within the overall CIF value upto 0.5% of FOB value of export:- "Paper with/without Graph - 150 sq.mtr., Colour Pencil/ Pencil with lead - 1 Piece, Graduate Flexible Curves/ Scale - 1 Piece, Pen Drawing/ Art/ Rapidograph/ Sketch/ Marker - 1 Set, Instrument Box containing compass set, pencil, Lead, Scale, Rubber, Sharpner, Scriber and Cutter work shap - 1 Set, Nibs mapping/ Scrip/ Print Timer with Holder - 1 Dozen, Stapler/ Staple Pin - 1000 Packs, Hand Operated Punching Machine - 1 No., Designer's all pins - 2 kgs, Tag gun/ Tag Pins/ Tags - Net to net, Numbering Machine - 1 No., Labaler Gun and Stickers - One/Net to net, Measuring Tape - 1 No. and Magnifying Glass - 1 No." ....
X X X X Extracts X X X X
X X X X Extracts X X X X
....stituted by the following:- (1) (2) (3) (4) (5) J10 Acrylic/Cotton Dyed Yarn 1 kg 1. Acrylic Fibre 1.06 kg/kg content in the export product. 2. Acrylic Dyes of 100% strength 2% of weight of Acrylic content in the export product. 3. Reactive/Vat Dyes of 100% strength 1.5% of weight of Cotton Yarn content in the export product. (1) (2) (3) (4) 71. 883 Textile Products Sl.No.J18 The description of the export product shall be amended to read as under:- "Bleached or Processed Polyester/Cotton Blended Fabrics or Madeups". 72. 884 Textile Products Sl.No.J21 The description of the export product shall be amended to read as under:- "Blended Polyester/Cotton Grey Fabrics or Madeups". 73. 909 to 912 Textile Products Sl.Nos.J124, J126, J127, J129, J130 and J131 The description of the import item 5 against these entries shall be amended to read as under:- "Reeled Tusser Silk Yarn". 74. 918 Textile Products Sl.No.J177 The norm covered by this entry shall be substituted by the following:- (1) (2) (3) (4) (5) J177 Gents Long Full Sleeve Jacket with Hood & Collar without Lining (made out of Nylon Tafetta Fabric) 1 Pc. 1. Nylon Tafet....
X X X X Extracts X X X X
X X X X Extracts X X X X
.... upto a specified period shall be extended upto 30.6.1999. For regularisation of these norms beyond this date, the exporter should follow the procedure given in Para 10 of General Note for all export products. Annexure "B" to Public Notice No.3 Dated 5.4.1999. CHEMICALS AND ALLIED PRODUCTS (1) (2) (3) (4) (5) A2182 Ketoprofen Isopropylamine Salt 1 kg 1. Aniline 1.267 kg 2. 2-Chloro Propionic Chloride OR 1.60 kg 2. a)2-Chloro Propionic Acid 1.60 kg 2. b)Thionyl Chloride 2.23 kgs 3. Benzoyl Chloride 1.64 kg 4. Aluminium Chloride 4.25 kgs 5. Isopropyl Alcohol 0.75 kg 6. Ortho Dichloro Benzene 2.50 kgs 7. Ethyl Acetate 4.50 kgs 8. Acetone 1.00 kg 9. Mono Isopropylamine 0.35 kg 10. Yellow Phosphorus 1.18 kg A2183 Anilophos 25% + Ethoxy Sulfuron 1% WP (Rice Guard 26 WP) 1 kg 1. Anilophos Technical 0.255 kg 2. Ethoxy Sulfuron Salt Technical 0.0102 kg 3. Phenyl Xylyl Ethane 0.096 kg 4. Sodium Salt of Fatty Acid Methyl Taurate 0.02 kg 5. Sodium Ligno Sulfonate 0.122 kg 6. Precipited Silica 0.443 kg A2184 Amlodipine 1 kg 1. Phthalic Anhydride 1.58 kgs 2. Mono Ethanol Amine 0.65 kg 3. Ethyl-4-Chloro Aceto Aceta....
X X X X Extracts X X X X
X X X X Extracts X X X X
....g A2197 Yellow Iron Oxide Pigment 1 kg 1. Ferrous Sulphate 1.650 kg 2. Iron Powder 0.428 kg 3. Caustic Soda 0.450 kgs. A2198 Zinc Di Butyl Dithio Carbamate 1 kg 1. Di-Butyl Amine 0.568 kg 2. Zinc Chloride(40%) 0.791 kg 3. Carbon Disulphide 0.344 kg 4. Caustic Soda 0.200 kg A2199 Yellow Iron Oxide Pigment 1 Kg. 1. Ferrous Sulphate Hepthydrate. 1.650 Kg. 2. Iron Powder 0.428 Kg. 3. Caustic Soda 0.450 Kgs. A2200 Iso-Octanol 1 MT 1. Heptene 838 kg 2. Copper Chromite Catalyst 0.300 kg 3. Nickel Catalyst 0.280 kg 4. Cobalt Oxide Catalyst 0.300 kg A2201 Iso Decanol 1 MT 1. Nonene 886 kg 2. Copper Chromine Catalyst 0.300 kg 3. Nickel Catalyst 0.280 kg 4. Cobalt Oxide catalyst 0.300 kg A2202 Polypropylene (Homo Polymer) 1 MT 1. Propylene 1.03 MT 2. Active shac-103 0.069 KG 3. Triethyl Aluminium 0.208 KG 4. PEER (SCA) 0.139 KG 5. Antioxidants: Irgonox-1010/ Irgonox-3114/ Ethanox-330/ Ultranox-626/ Irgofos-168 1.717 KG 6. Additives: Hydrotalcite DHT-4A/Erucamide/Olemide/Gresil/ AB-720/Glceryl Monosterate (Myverol 18-6) Zinc Oxide/Acrawax 2.500 KG A2203 Pigment Yellow 14 (Non Rosinated) CI NO.210....
X X X X Extracts X X X X
X X X X Extracts X X X X
....c Acid 5.73 kg 2. 1,4-Dithiane 2,5-Dihydroxy 3.02 kg 3. Cytosine 1.24 kg 4. Sodium Meta Periodate 9.31 kg 5. Tetrahydrofuran 4.29 kg 6. Trimethyl Iodosilane 6.62 kg 7. 2,2,2-Trifluoric Ethylene 3.29 kg 8. Sodium Borohydride 1.73 kg A2210 Sodium Sulphite 1 kg 1. Caustic Soda 0.705 kg A2211 Sodium Meta Bisulphite 1 kg 1. Caustic Soda 0.467 kg A2212 Sodium Bisulphite 1 kg 1. Caustic Soda 0.426 kg A2213 Organic Synthetic tanning Agent containing Phenol Formaldehyde condensate 57% Naphthalene Formaldehyde condensate 15% and (C4-C5) 13% dicarboxylic acid distillate 1 kg 1. Phenol 0.350 kgs 2. Formaldehyde 37% 0.448 kgs 3. Napthalene 0.084 kgs 4. Caustic Soda Flakes 0.164 kgs 5. Dicarboxylic Acid 0.130 kgs A2214 Organic Synthetic tanning Agent containing 66% Phenol Formaldehyde condensate 17% Naphthalene Formaldehyde condensate (Tystyntan to Base) 1 kg 1. Phenol 0.415 kgs 2. Formaldehyde 37% 0.529 kgs 3. Napthalene 0.096 kgs 4. Caustic Soda Flakes 0.193 kgs A2215 Sodium Phenyl Acetate (100% Basis) 1 kg 1. Benzyl Chloride OR 0.935 kg 1. i)Toluene 0.830 kg 1. ii)Sodium Cyanide 0.360 kg 1. i....
X X X X Extracts X X X X
X X X X Extracts X X X X
....g Steel Strip 1.05 kg/kg content in the export product. 2. Bakallite Strip 1.02 kg/kg content in the export product. 3. Spring (Lower contact finger) Net to net. 4. Support (Upper contact finger) Net to net. 5. Tungsten Contacts Net to net. 6. CRCA Sheet 1.10 kg/kg content in the export product. 7. Copper Wire 1.02 kg/kg content in the export product. 8. Insulating Bush Net to net. 9. Adjusting Screen Net to net. 10. Bobbin Net to net. 11. Glass Filled Nylon 66 1.05 kg/kg content in the export product. 12. Hydrophobic Filter Net to net. C1406 Stainless Steel Casseroles of various designs (based on non CFC PU Insulation) 1 Kg. 1. Stainless Steel Coil 0.5 mm Thickness (AISI 304 grade) 1.40 Kg/Kg content in the export product. 2. Polyol 0.525 Kg of PU content in the export product. 3. Isocynate (MDD) 0.525 Kg of PU content in the export product. 4. ABS(Acrilonitrile Butadine Styrene) Plastic the 1.050 Kg/Kg content in export product. C1407 Cow Magnets/ Pill 1 No. 1. Rare Earth Magnet (7 gm each) (Relevant diameters) 2 Nos. 2. Stainless Steel Casing 1 No. 3. M.S. Pole Pcs (Centre) 1 No. 4. M.S. Pole Pcs (Ends) 2 Nos. C1408 S....
X X X X Extracts X X X X
X X X X Extracts X X X X
....Printing Ink (total solid 25% +/- 3%) 10 GMS/Sq.Mtr + wastage. 3. Liquid Polyurethane adhesive (total solid 60% +/- 5%) 4.0 GMS/Sq.Mtr + wastage. 4. Liquid Polyurethane additive (total solid 50% +/- 5%) 0.8 GMS/Sq.Mtr+ wastage. 5. Relevant Hotmelt Actual Grammage + wastage. FORMULA The composite weight in Gms per Sq.Mtr.(GSM) of the export product is to be calculated as A+B+C+D+E+F where: A = Weight in Gms per Sq.Mtr.(GSM) of relevant film used as 1st layer as at Sr.No.1 which is to be determined as follows: Specific gravity of the film X thickness(Micron) = GMS/Sq.Mtr. B = Weight in Gms per Sq.Mtr.(GSM) of relevant film used as 2nd layer as at Sr.No.1 which is to be determined as follows: Specific gravity of the film X thickness (micron) = GMS/Sq.Mtr. C = The weight of ink at S.No.2 on dry weight basis shall be taken as 2.5 Gms/Sq.Mtr. on an average having total solid content of25%+/-3%. D = The weight of adhesive at S.No.3 on dry weight basis shall be taken as 2.5 Gms/Sq.Mtr. on an average having total solid content of 60%+/-5%. E = The weight of additive at S.No.4 on dry weight basis shall be taken as 0.20 Gms/Sq.Mtr. on an average having total solid content o....
X X X X Extracts X X X X
X X X X Extracts X X X X
....duct. 2. FLEXIBLE PACKAGING MATERIAL/LAMINATE CONTAINING SINGLE LAYER OF INPUTS AS AT SR. NO.1 In the case of export of single layer printed flexible packaging material, import of relevant inputs at Sr. No.1 & 2is allowed with wastage of 12% (twelve) and 10% (ten)respectively. Further, the import of input at Sr. No.5 is allowed with wastage of 10% (ten) if the product is exported with hotmelt. (However, import of inputs at Sr. No.3 & 4 will not be allowed for said product). 3. FLEXIBLE PACKAGING MATERIAL/LAMINATE CONTAINING TWO LAYERS OF INPUTS AS AT SR. NO.1 i)In the case of export of two layer printed flexible packaging material/laminate the import of relevant inputs as at Sr.No.1,2,3 & 4 is allowed with wastage of 15% (fifteen), 10% (ten), 10% (ten) and 10% (ten) respectively. The import of input at Sr.No.2 i.e. liquid printing ink will not, however, be allowed in the case of export of unprinted flexible packaging material. Further the import of inputs as at Sr.No.5 is allowed with wastage of 10% (ten) if the product is exported with hotmelt. ii) In the case of export of extrusion coated flexible packaging material/laminate the import of inputs as at Sr.No.1(k) i.e. LDPE gra....
X X X X Extracts X X X X
X X X X Extracts X X X X
....f the LDPE granules in the extrusion lamination process. Additional wastage of 5% (five) for converting PP granules to BOPP film and 5% (five) wastage for PET chips to polyester film is allowed. 8. Exporter shall have the option to apply for import of inputs; for making polyester film as per SION published in EXIM Policy/Procedure in lieu of import of polyester films as such. 9. If the manufacturing process involves extra step of converting base plastic film (as at Sr.No.1) to holography film then the import of relevant film used for holographic expression will be permitted with additional wastage of 3% (three) over and above the entitlement for various flexible laminates/pouches. 10. In case of unprinted material, ink is not to be allowed and consequently wt. of dry ink taken at `C' in the formula is not to be taken for calculation purposes. 11. In case of export product without hotmelt, hotmelt is not to be allowed and consequently wt. of hotmelt taken as `F' in the formula is not to be taken for calculation purpose. 12. Specific gravity of raw material to be used in the export product are as under: 1. PET 1.38 2. Metallised PET 1.38 3. BOPP 0.90 4. Metallised BOPP....
X X X X Extracts X X X X
X X X X Extracts X X X X
....n brass/Silicon bronze/high tensile brass with copper and other alloying elements, like Zinc varying from 10 to 35% and other elements like Aluminium, Manganese, Silicon, Iron, Lead each not exceeding 5% conforming to ASTMB584-C87500, C-87600, C-87610/ASTMB371-69400/BS1400 HTB1, HTB3 1 kg 1. Brass Scrap or ingots with other balancing alloying elements OR 1.20 kg/kg content in the export product. Cathode copper/Copper scrap with alloying elements like zinc, aluminium, lead, manganese and silicon 1.25 kg/kg content in the export product. C1377 Machined Cast Components for valve internals like spindles, stems, yoke sleeves, yoke bushes, discs, widges, sealing or seat rings and machined bushes for both Autotmotive and Non-Automotive applications manufactured out of Aluminium bronze with copper and Aluminium 8 to 11% and Iron 1.5 to 3.5% conforming to BS1400-AB1/ASTMB 148-C-95200, C-95300/DIN 1714 GCUAL 10 FE 1 kg 1. Aluminium Bronze ingots or scrap OR 1.20 kg/kg content in the export product. Cathode copper/ copper scrap and aluminium 1.25 kg/kg content in the export product. Annexure "H" to Public Notice No.3 Dated 5.4.1999 (1) (2) (3) (4) (5) G7 a)Finis....
X X X X Extracts X X X X
X X X X Extracts X X X X
....nished leather using the above Transfer Foil/Film. 44. Miscellaneous Items: a)Knife Blades/Band Knives: Splitting Band Knife/Fleshing Knife/Shaving Knife b)Grinding Wheels for Splitting Machine/Fleshing Machine/Shaving Machine c)Felt/Felt Sleeves Samming Machine/Setting cum Samming/ Polishing Felt Roller d)Stones: Polishing Stone Roller/Wet Buffing Stone Roller e)Emery Paper: Roll of 50 Metre Length f)Glazing Glass g)Padding Mohair cloth h)Embossing plate Upto 5% of FOB value of export, out of which value of each of the items at (e), (g) & (h) shall not exceed 5% of the overall CIF value of miscellaneous items permitted for import. G7 b) Finished Leather from Skin of Goat/Sheep/Calf 1000 sq.ft. 1. Preservative 1.5 kg 2. Wetting Agent 5 kgs 3. Soaking Enzyme 2.5 kgs 4. Unhairing Agent: a)Sodium Sulphide 2.5 kgs b)Sulfohydrate 2.5 kgs 5. Leather Linning Auxilliaries 1.5 kg 6. Deliming Agent 2.5 kgs 7. Bating Agent 5 kgs 8. Leather DegreasingAgent (Fatty Alcohol/Esters/Fatty Acid Derivatives) 5 kgs 9. Bleaching Agent(Sodium Bisulfite/ Hydrogen Peroxide/Sodium Chlorite/Potassium Per-manganate) 1.5 kg 10. Formic Acid 10 kgs 11. Acetic Acid ....